Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38
  1. #1
    Power User
    Join Date
    Nov 2004
    Location
    Maryland
    Posts
    3,939

    Default First problem with Bel STI Already!!!!

    Well I hope this is the first and last problem. Got in my car in the grocery store parking lot and started my car. Then I powered up the STI and it went through it's power on squence. After I powered on the STI it started alerting Ka7 it also began to alert the K band from the grocery store automatic doors, the K band stopped alerting after I left the parking lot. I looked everywhere for the source of the Ka and coud not find it. I left the store parking lot and drove on several roads over 2 miles away the whole time the STI was still alerting Ka7. So I finally powered the STI off and then back on again and the Ka alert stopped.

    THERE IS NO EXCUSE FOR A $450 RADAR DETECTOR TO HAVE THIS KIND OF PROBLEM!!!!!!!!!!!!!!

    This better be the last poblem I have with it. I was hoping that Beltronics & Escort (Belscort) would leave their piss poor quality issues they have had with previous detectors in the past and thought maybe the STI would be of a higher quality, but I guess this is not the case!

    WARNING TO ANYONE CONSIDERING BUYING ESCORT OR BELTRONICS (BELSCORT) PRODUCTS, THEY HAVE QUALITY ISSUES!!!!!

    I have had multiple problems with my X50 and I am now on my 3rd one, it had to be replaced TWICE by Belscort!!!!

    The only detector I have never had any problems with and it works great is the Escort Passport 8500. This was before the X50 came out and come to think of it, before Beltronics merged with Escort to form the same company which I have referred to as Belscort in this post.

    BELSCORT IF YOU ARE READING THIS, FIX YOUR DAMN DETECTORS!!!!

  2. #2
    Power User
    Join Date
    Aug 2005
    Location
    South Florida
    Posts
    4,150

    Default

    Only a very few times, less than you can count on one hand, I have had strange or wacky experiences, anything that would seem strange I would confirm by just restarting the RD. I have heard these gliches happen from everyone owning the V1, Escort, as well as Bell, even a Whistler user commented. So although it is unnerving, it a fact of life. Your right it should not happen, but.

    There have been some advisements of beware of starting up in the presence of strong radar sources as this can cause some plausable "sampling" error or what ever if anything is being processed or analyzed at the begining of startup sequence.

  3. #3
    Founder of Stealthvation
    Join Date
    Dec 2004
    Location
    Cleveland, Ohio
    Posts
    11,174

    Default

    I personally think that Bel might have rushed their STI to the market. Hopefully they will be as stellar as VR in terms of customer service
    RIP Duncan my BELOVED black lab son 8/7/99-3/23/11. I will miss you DEARLY.


    http://www.criminalcustomzshop.com/


    LET THE BIRTH OF MANY TESTING GROUPS HAPPEN!











    You want to know what it is like doing something for the love and passion and not for the mighty dollar then look up GOL!










    buyradardetectors rocks!

  4. #4
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Quote Originally Posted by happya$$
    I personally think that Bel might have rushed their STI tot he market. Hopefully they will eb as stellar as VR in terms of customer service
    Maybe they will now with the newest detector on the market, because they may not be rushing to create a 'new' one.

    That said... my V1 seems to be crapping out again... except not on Ka band (like it did when I first got it, from the factory)... now the front antenna seems to be missing X&K band alerts. :roll: :roll:



    StealthJamal: Maybe something to think about... maybe you can't power-on the unit in the presence of a K/X band alert? Maybe if its going through its on-cycle as it is getting an incoming signal it messes it up... henceforth the Ka alert, because you said that after you turned it off, then back on... it was fine (and I am assuming at this point you were away from any X/K band door openers).

  5. #5
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default Re: STI

    Stealthjamal, I tried to tell you that BelEscort had problems a while back since the merger. It is people like you who need to call BelEscort and hopefully get one of your rd's fixed on them (no cost). Not all detector manufacturers are perfect. Airmoore has problems w/ his V1 and I had problems w/ both my X50 and Bel 970. The 970 now works good (sent in a 5th time) but lost detection on x band w/ my X50 (after it was sent back to BelEscort to fix the POP falses). I hate to hear of ANYONE having problems w a brand new V1, Bel, or Escort rd. For the money you paid for that STi, BelEscort better fix it for free! Please keep us posted as to what is going on w/ your STi? :x Mk

  6. #6
    Yoda of Radar
    Join Date
    Dec 2004
    Location
    In front of my computer
    Posts
    10,773

    Default

    Quote Originally Posted by happya$$
    I personally think that Bel might have rushed their STI to the market. Hopefully they will be as stellar as VR in terms of customer service
    What? They said they'd release it like two years ago, then it was July then it was January and now it's even more bug work-out time.

  7. #7
    Professional
    Join Date
    Nov 2004
    Posts
    1,397

    Default

    Yes they certainly did not "rush" it out to market... the STi was under development for ages and supposedly had "millions" of USD spent on it...

  8. #8
    Good Citizen
    Join Date
    Nov 2004
    Location
    Right Behind You
    Posts
    182

    Default

    Quote Originally Posted by SmaartAasSaabr
    Quote Originally Posted by happya$$
    I personally think that Bel might have rushed their STI to the market. Hopefully they will be as stellar as VR in terms of customer service
    What? They said they'd release it like two years ago, then it was July then it was January and now it's even more bug work-out time.
    Kind of reminds me of every version of Windows ever released.

  9. #9
    Professional
    Join Date
    Mar 2005
    Posts
    1,454

    Default

    I am still on w98

  10. #10
    Power User
    Join Date
    Feb 2005
    Location
    In Car RamRod
    Posts
    4,001

    Default

    did ya call Bel stelth?? id do that first.

 

 

Similar Threads

  1. Bel 995 problem!
    By spiceman40 in forum Beltronics
    Replies: 5
    Last Post: 12-02-2009, 02:20 PM
  2. problem?
    By texasspeed in forum Beltronics
    Replies: 11
    Last Post: 11-28-2009, 11:22 PM
  3. Just got my LI but 1 problem...
    By rockets713 in forum Laser Interceptor
    Replies: 26
    Last Post: 01-14-2009, 03:43 PM
  4. RX 65 Problem???
    By Joe in forum Beltronics
    Replies: 7
    Last Post: 05-21-2006, 01:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •