Which blinder for 2005 Avalanche?

[mikeeo]

Hey all I have a 2005 Avalanche Z-71 and wondering if the M27 will give me enough coverage? I'm Delaware so no front plate. I have a 500.00 budget.

Thanks,
Mike

[speed-dreams]

You might need a M47

[BlinderGuy]

M47 is what you are going to need to protect that...Most will disagree but from seeing performance with my own eyes you may get away with a M37.

[snoopyc4]

Blinder M47. You will need four blinder heads to protect your vehicle. Post a picture of the front of your vehicle so we can recommend jammer head placement.

[category4]

I'm going to try a M27 on a Ford f-150. Hopefully i will have them before our 8/15 test so we can see how they perform.

[mikeeo]

category4 how is the M25 working on your F-150?

[category4]

Haven't gotten the M27's yet. I did try a set of M27's Blinder-Guy brought up to one of our recent tests. As a 4 head (M47) on the F-150 it was almost if not JTG on every gun. I think we got some small PT's due to the angle of the course. It was so impessive we tried 2 heads and we did get some PT's but they were sub 300'. We then tried my M45's (which we found had one head not firing all LED's later) and the M27's did way better than my M45.

I was so impressed that I am going to try the M27's only, hopefully for our next test session in August. If they work as well as I expect I will leave it as a M27 and add 2 rear heads.

It will be about 3 weeks (hopefully) before the results are out on how well the M27 does on a F-150.

As a caveat here to I do have a very Light coat of Veil on the headlights.

[mikeeo]

Ok I just ordered the M27 anyone have a good idea for mounting points?

Thanks,

Mike

[trailtow]

where did u get one they are not out yet to my knowledge

[crazyVOLVOrob]

Ok I just ordered the M27 anyone have a good idea for mounting points?

Thanks,

Mike

First off they are not available yet so I doubt you are purchasing through a registered dealer and seconds

Blinder M27 is not enough to cover a vehicle that large. You NEED a blinder m47 minimumly!!!!