Page 1 of 5 123 ... LastLast
Results 1 to 10 of 44

Thread: Chip+CAI?

  1. #1
    Old Timer
    Join Date
    Aug 2006
    Location
    Orlando, FL
    Posts
    8,880

    Default Chip+CAI?

    Ive been toying with the idea of sometime next year getting some sort of performance chip and maybe a Cold Air Intake. Im looking more for a crisper throttle respose, a little bit more Umph :P
    Are either of these a waste of money?
    What would be the best brands for either one?
    Or is there something else that would give me more power for the my money.
    Total cost for both should be around 500-600$. Oh, btw, I have a 4.6 V8, if that matters at all

  2. #2
    Good Citizen
    Join Date
    Jul 2006
    Posts
    161

    Default

    Depends on the chip. They are not all equal. for CAI, I'd go with K&N since they will have one for your vehicle. If you really want to see a dif however, you should have a custom exhaust made. The CAI will allow more incoming air, but not as effective with stock exhaust. With only a custom exhaust alone, you'll walk the same vehicle that's stock. Especially on the highway. And you'll also get better mpg.

    Flex

  3. #3
    Power User
    Join Date
    Aug 2005
    Location
    Southlake, TX
    Posts
    4,136

    Default

    I agree with Flex, a free-er flowing exhaust system will help, but I also did Intake 1st, no big deal

  4. #4
    Professional
    Join Date
    Aug 2006
    Location
    Virginia, unfortunately
    Posts
    1,012

    Default

    CAI is a pretty easy install for most vehicles. Shouldn't take more than an hour or two for someone with basic knowledge of car mechanics. As far as chips go, depends on the vehicle. Turbo cars gain the most from chip tuning as boost, fuel, and timing are all controlled by the ecu. In most n/a applications you will probably only see a 5-10 hp gain.

    Brand of intakes will vary by car. K&N is pretty good name for just about everything. AEM is good, but most applications are for Japanese cars.

  5. #5

    Default

    There has been tests done on OEM and K&N Air filters and there has been no gain in performance. But there was dirt allowed through with the K&N in the engine then with the OEM air filter. The oil that comes with the K&N air filter has caused damage to MAF (Mass Air Flow sensors) built into the throttle that comes after the airfiltre. The K&N airfilter is a waste of $$$. Your better off getting a quality chip, free-flowing cat/cats, free'er flowing exhaust system.

  6. #6
    Good Citizen
    Join Date
    Jul 2006
    Posts
    184

    Default

    Quote Originally Posted by Audi Quattro
    There has been tests done on OEM and K&N Air filters and there has been no gain in performance. But there was dirt allowed through with the K&N in the engine then with the OEM air filter. The oil that comes with the K&N air filter has caused damage to MAF (Mass Air Flow sensors) built into the throttle that comes after the airfiltre. The K&N airfilter is a waste of $$$. Your better off getting a quality chip, free-flowing cat/cats, free'er flowing exhaust system.
    Do you have a link to this test, and/or the vehicle it was done with?

    I have never heard of a K&N product being worse than an OEM.

    As to the OP, it all depends on the application. Personally, I don't think a CAI is worth all that much, because you can probably make one yourself on the cheap. In my case, a 96 dodge neon, I can create a CAI out of 3.0 intake tubing for about 10 bucks and then put on a filter.

    Also, I don't see you gaining more than a couple of HP out of it. Of course, every little bit helps. Also, how "warm" is your current intake? If it's pulling air from across the engine or soemthing, then yeah a true CAI will make a difference, but if it's pretty efficient already, then you'd be wasting money.

    Also, a CAI can only have no effect or lower your gas mileage. Think about the physics of it. CAI won't improve your mileage.

    I can't speak to chipping because I've never owned a car that could be chipped.

  7. #7
    Radar Fanatic
    Join Date
    Jun 2005
    Location
    Fort Worth, Texas
    Posts
    2,274

    Default

    what does a chip do to a N/A car?

  8. #8
    Old Timer
    Join Date
    Aug 2006
    Location
    Orlando, FL
    Posts
    8,880

    Default

    Quote Originally Posted by f_399
    what does a chip do to a N/A car?
    Dont know what you mean by N/A, but apparently, a chip increase the fuel given to the engine across various throttle positions. Or something like that :P

    EDIT: Heres a pic of my current OEM air filter. I may just save the 200+ dollars, and not buy a CAI (Maybe put it towards a jammer :P ). I would get a better exhaust, but they're kinnda expensive. 500+ dollars :?


  9. #9
    Radar Fanatic
    Join Date
    Jun 2005
    Location
    Fort Worth, Texas
    Posts
    2,274

    Default

    naturally aspirated(no force induction)

    ahh ok

    coz i know with a turbo, a chip really helps

  10. #10
    Professional
    Join Date
    Aug 2006
    Location
    Virginia, unfortunately
    Posts
    1,012

    Default

    Quote Originally Posted by ELVATO
    Quote Originally Posted by f_399
    what does a chip do to a N/A car?
    Dont know what you mean by N/A, but apparently, a chip increase the fuel given to the engine across various throttle positions. Or something like that :P
    Sorry.....been around turbo'd cars too long. N/A=naturally aspirated......as in non-turbo cars.

    Audi Quattro, if your refering to just a drop in replacement K&N or equivalent performance filter you will see little if any performance gain.

    As a general rule, the stock air intake system is designed to be quiet and as a result more restrictive. Replacing the factory airbox with an aftermarket cai will usually net small gains (5-10hp). I guess the better question would be what type of car are we talking about as what works one car may not work well on another.

    In reference to mass air sensor (maf) problems, also more of a car specific issue. Most domestic guys swear by K&N's and I have heard of few problems with oil from the filter shorting out the maf.
    Typically, a more free flowing filter will allow more dirt to get into the engine. That is the drawback for oiled filters like the K&N for example.They tend to flow better but at a cost of allowing more dirt inside the engine. This is why they are not the best choice for people who drive on dirt roads or off road regularly. For a street car its up for debate as to how much of an impact this will have on an engines longevity. There are countless guys that have been running K&N's well over 100K and have no problems. A used oil analysis is really the only way to tell how much dirt is getting into the engine.

 

 

Similar Threads

  1. Chip in the transmit lense
    By th3 factory freak in forum Laser Interceptor
    Replies: 12
    Last Post: 08-23-2010, 08:55 AM
  2. Replies: 20
    Last Post: 10-09-2007, 08:55 PM
  3. AL G8 - PIC chip
    By anjoem in forum Laser Jammers - General
    Replies: 2
    Last Post: 12-10-2006, 11:23 PM
  4. little ''chip'' on the inside of the lens...
    By laserblaster in forum Valentine One
    Replies: 7
    Last Post: 06-29-2006, 10:54 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •