Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34
  1. #1
    Radar Fanatic
    Join Date
    Jan 2008
    Location
    Texas
    Posts
    1,715

    Default Increase light output...

    What is the cheapest way to get better light output from my car? I hear about these Xenon HID kits... do they work? I almost hit a deer today due to my poor light output....

    My right headlight is kinda fogged, I am going to replace it unless there is a way to unfog it...

    About how much should I be looking to spend for better light output?

  2. #2
    Old Timer
    Join Date
    Apr 2007
    Location
    New Jersey
    Posts
    6,770

    Default

    depends wether u just get bright and more powerful bulbs to actual HID systems

  3. #3
    Yoda of Radar
    Join Date
    May 2007
    Location
    Miami Beach, Florida
    Posts
    10,973

    Default

    Well first...what kind of headlights do you have now? Sealed beams, halogen reflectors, halogen projectors, xenon HID?

    I'm gonna guess you have halogen reflectors. If that is the case, you can get better bulbs (I've heard OSRAM Night Breakers are the best right about now) and you definitely need to have clear lenses. If they've just got condensation, you can open 'em up and clean 'em out...try to do it in a low-humidity low-temperature atmosphere, and then seal it up very carefully. If it's the outer surface, then you need to wetsand the surface.

  4. #4
    Speed Demon
    Join Date
    Jun 2007
    Location
    Tejas
    Posts
    556

    Default

    You can try some of the ricer projectors from ebay for an EK civic though they may be ugly...


    a friend of mine picked up a set and uses standard halogens and they work quite well....

    unfortunately honda never put glass lights on any of the ek's in the states so you're kinda sol... i'd just clean/defog the stock lights and get good bulbs... dont put hid's in because you'll just annoy the sheet out of everyone else on the road

  5. #5
    Yoda of Radar
    Join Date
    May 2007
    Location
    Miami Beach, Florida
    Posts
    10,973

    Default

    What's wrong with plastic lights?

  6. #6
    Speed Demon
    Join Date
    Jun 2007
    Location
    Tejas
    Posts
    556

    Default

    Quote Originally Posted by JDS
    What's wrong with plastic lights?
    they get cloudy after a few years

    glass lasts forever and wont dull


    glass headlights imo are just classier

  7. #7
    Yoda of Radar
    Join Date
    May 2007
    Location
    Miami Beach, Florida
    Posts
    10,973

    Default

    Meh, glass headlights can get beat up too, but they're not as easy to fix.

  8. #8
    Radar Fanatic
    Join Date
    Jan 2008
    Location
    Nebraska
    Posts
    2,216

    Default

    Have you considered HIR (not HID) bulbs? I dont recall if the Civic uses seperate high/low bulbs or if they have a single bulb for both. I'm using Toshiba HIR bulbs from fleabay in my camry rated for 1800 lumens each. They're a huge improvement over the stock halogens (1000 lumens) and miles better than the ricer blue (last pair was around 900 lumens). If you're going for the blue look, the HIRs will not do the job; the hue is close to regular halogens. For only $60/pair, IMO the HIRs are a better buy than PIAAs and Nokyas selling for $70/pair. If your car uses 9006/9005, get 9012/9011 and a small amount of tab cutting will make them fit.

    If your car uses 9004 or 9007, I haven't seen HIR equivalents so a HID retrofit may be the way to go if it can be made to not blind oncoming traffic. If the headlight lenses are fogged up or yellowed, try some Meguiars PlastX on them or car polish. I've been using the car polish frequently on my headlights and they're still looking new.

    Here's my low beam only, fogs turned off. Pics a bit blurry, but it was taken at 85mph.

  9. #9
    Old Timer
    Join Date
    Aug 2006
    Location
    Orlando, FL
    Posts
    8,880

    Default

    Wetsand with 1000, wetsand with 1500, rub with terry cloth and rubbing compound for a bit, polish with PlasticX, seal with car wax. Only do that with plastic headlights, though. Just did my sis' Mustang headlights (seems that model has a problem with oxidation.)

    The Silverstar Ultras work for me. They were alright with Veil on them, but now that I've removed that stuff, it's a lot better.

    It's almost like that song "I can see clearly now the Veil is gone."

  10. #10
    Yoda of Radar
    Join Date
    May 2007
    Location
    Miami Beach, Florida
    Posts
    10,973

    Default

    I'll tell you how the Veil G4 works out for me...I can't WAIT to get the old Veil off, damn love bugs ruined it so badly that everybody is convinced that my lenses are all fogged up...

 

 

Similar Threads

  1. G4, Light-output: Before/After *Pictures*
    By AirMoore in forum Laser Veil Stealth Coating
    Replies: 10
    Last Post: 08-27-2008, 02:44 PM
  2. Light output with VEIL applied (properly this time)
    By Qui-Gon in forum Laser Veil Stealth Coating
    Replies: 10
    Last Post: 08-26-2008, 03:11 AM
  3. Veil G4 + Laser Shield Jeep Install (Testing Light Output)
    By mswlogo in forum Laser Veil Stealth Coating
    Replies: 7
    Last Post: 08-20-2008, 11:04 PM
  4. Light output reduced to candle power - almost
    By RX-75 in forum Laser Veil Stealth Coating
    Replies: 9
    Last Post: 08-15-2006, 09:29 AM
  5. Light Output
    By 2001SE in forum Laser Veil Stealth Coating
    Replies: 29
    Last Post: 02-18-2006, 11:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •