Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27

Thread: Oil Issues

  1. #11
    Power User
    Join Date
    Apr 2005
    Location
    Evergreen State
    Posts
    3,884

    Default

    Quote Originally Posted by METEORIC
    I have been using Valvoline Maxlife 10W-30 in my truck for along time and it has 175K miles on it and it still does not leak. I have recommended this oil to my father and he started putting the the same oil in his van that has 80K miles on it. It used to leak a couple drips a day on the ground he said that it does not leak at all anymore after he changed it a couple times.
    This oil is also not a true synthetic oil! It is a group III hydrocracked dino oil. Amsoil is a true Group IV synthetic oil and the additive package in valvoline cannot be compared to amsoil's additive package!

  2. #12
    Professional
    Join Date
    Jun 2005
    Location
    Lufkin, TX
    Posts
    878

    Default

    Yeah, the Valvoline Max-life has something in it to re-condition old seals. Where are you leaking oil from? I use Max-life 10/30 and don't have a problem. I had a rear main leak in my Regal when I had that and switched to Max-life and no more leak.

  3. #13
    Power User
    Join Date
    Apr 2005
    Location
    Evergreen State
    Posts
    3,884

    Default

    Quote Originally Posted by Arvetus
    Yeah, the Valvoline Max-life has something in it to re-condition old seals. Where are you leaking oil from? I use Max-life 10/30 and don't have a problem. I had a rear main leak in my Regal when I had that and switched to Max-life and no more leak.
    Valvoline is a good high milage oil, I believe they use around 10% ester which acts as a seal conditioner. Plus you will find the max life 10w30 is a tad thicker that your avg. 10w30.

  4. #14
    Radar Fanatic
    Join Date
    Jun 2005
    Location
    Fort Worth, Texas
    Posts
    2,274

    Default

    so i should switch from amsoil ------> valvoline max life?

  5. #15
    Power User
    Join Date
    Apr 2005
    Location
    Evergreen State
    Posts
    3,884

    Default

    Quote Originally Posted by f_399
    so i should switch from amsoil ------> valvoline max life?
    Yes that would be a decent choice and a lot cheaper for you! I personally wouldn't use valvoline max life for the simple reason valvoline not too long ago stopped putting moly in this oil. If I were you I would go to costco and pick up a case of havoline or chevron supreme, they are less than a dollar a quart and are running between 350 and 400 ppm of moly! Just because it's $cheap$ doesn't mean it's cheap, these two oils give some of the best wear #'s you'll find I use em' in my 03' cobra and and get awsome #'s

    I recommend you first find a oil that you and your car likes, hopefully the leaks stops and then I would do an oil anlysis to see how your engines internals are wearing with the particular oil that you are using. I have seen people using oil that costs over five bucks a quart and was producing terrible wear #'s.


    If I were you I would do at least one auto-rx treatment due to the high milage!

  6. #16
    Power User
    Join Date
    Apr 2005
    Location
    Evergreen State
    Posts
    3,884

    Default

    Take a look at this link! Below is an example of their service, click on image to enlarge.

    http://www.blackstone-labs.com/gas_engines.html





  7. #17
    Radar Fanatic
    Join Date
    Jun 2005
    Location
    Fort Worth, Texas
    Posts
    2,274

    Default

    FYI

    the guy who checked it said the oil leak was on the side of where the pulleys are

    pep boys wants to charge me $500 for labor and $20 for the gasket!


  8. #18
    Power User
    Join Date
    Apr 2005
    Location
    Evergreen State
    Posts
    3,884

    Default

    Quote Originally Posted by f_399
    FYI

    the guy who checked it said the oil leak was on the side of where the pulleys are

    pep boys wants to charge me $500 for labor and $20 for the gasket!


    Looks like mabey it's the crank shaft front seal gasket. If I were you I would jack your car up and try tightening the oil pan bolts, check the filter to make sure it's tight and you never know the filter may have a faulty gasket and isn't sealing correctly just look over everything closely and try tightening all the bolts you can that are next to the oil leak!

    Are you also sure that the oil isn't coming from the valve cover area and dripping down the side of the motor?

    I would just keep and eye on it, if the leak is only minor then it really isn't a big deal and you can try going to a different oil and mabey an additive but if your going through a quart a week you really should have it changed cause it's just going to get worse fast.

    I'd call around and get some quotes because i just don't trust pepboys

  9. #19
    Radar Fanatic
    Join Date
    Jun 2005
    Location
    Fort Worth, Texas
    Posts
    2,274

    Default

    my car is due for an oil change and i have been searching the net regarding what oil to use....

    from what i read i should definitely stick with full synthetic

    now... should i keep using amsoil/royal purple or go back to the "cheaper" mobil 1?

    also was using 10w30 but the car is suppose to use 5w30.... which grade should i use?

  10. #20
    Professional
    Join Date
    Jun 2005
    Location
    Lufkin, TX
    Posts
    878

    Default

    being in texas, I would stick with the 10w30. If you were in the north country, I'd do 5w30. Even then, I use 10w30 in my car and never had any problems

 

 

Similar Threads

  1. V1 issues
    By Domsz06 in forum Valentine One
    Replies: 37
    Last Post: 11-27-2009, 07:42 PM
  2. V1 issues?
    By hockey005 in forum Valentine One
    Replies: 7
    Last Post: 06-16-2008, 07:28 PM
  3. J issues
    By TheTexan in forum Valentine One
    Replies: 12
    Last Post: 12-24-2006, 03:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •