I know! More mandates, regulations, laws and rules! That'll solve everything!
![]()
I know! More mandates, regulations, laws and rules! That'll solve everything!
![]()
It sounds like you have the "indirect" system that works off the wheel speed sensors, which are shared with the ABS. That works by measuring the speed of the wheels and if one is rolling faster than the others, as it would if there was less pressure in the tire to maintain its effective diameter, it turns on the light. Personally, I'd get that fixed because ABS has saved my ass at least once and I'd rather not do without it all the time.
I wouldn't disable ABS deliberately in case I do get into an accident and a crooked lawyer and an uninformed jury consider it a problem. I know it increases stopping distances in snow, but with proper winter tires I should still have an advantage over a non-ABS car dragging its all seasons through the snow.
The whole reason for ABS is so that the tires are still turning slightly so if you turn the wheel while slamming on the brakes, you will still be able to manuever. If you pull the fuse, your wheels will lock up and your car will only go in the direction it already is, then slam into whatever you couldnt steer around.
On properly functioning ABS, your stopping distance should be shorter than a lock up of the wheels.
Also, if the rears lock up and the front does not, your rear will soon be at the front![]()
Truths
- ABS allows a driver to simply slam on the brakes and still steer
- ABS allows the rear wheels to help as much as they can instead of relying on front brake bias to keep them from looking up.
- It's not efficient or safe to slide to a stop on a good surface.
but
- Stopping distance is not universally decreased, particularly on loose surfaces like snow and gravel on which being able to dig into the surface is more effective than gingerly trying to avoid locking up on it.
Also, ABS tends to FAIL on rough/changing surfaces on a downgrade. Had my pedal fall towards the floor on two cars on a notorious hill here in Portland. Overall I like it but they really need to add some additional sensors to compensate for the scary pedal to the floor as I am stopping on a hill with busy traffic in front of me issue.
Pedal to the floor? Something seems screwed up there. ABS should increase pedal effort as it prevents you from pushing down harder and locking the wheels. It might only kick in lightly if you're decelerating gently and just hit a little slick spot, but if you really stomp down on the pedal it should become very firm and vibrate slightly.
How lame! Luckily subie enthusiasts already hacked and open sourced our ecu code.
I did find this solution on a Mazda forum:
my sollution is to drive close to another mazda w tpms sensors installed. when on a 6 hour long trip i was close enough to the other guy and my light went out.
Bookmarks