Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: Clutch!

  1. #1
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default Clutch!

    Well, I need a new clutch on my 2000 Hyundai Accent. I have over 167,000 miles on it. Since it was having a hard time going into gear I thought it might be the tranny linkage. Wrong! This mechanic asked me how I got so many miles on my car anyway? So, I guess I got some good wear on the original clutch. Any suggestions before I have the big "clutch" changed? Mk

  2. #2
    Power User
    Join Date
    Aug 2005
    Location
    South Florida
    Posts
    4,150

    Default Re: Clutch!

    Quote Originally Posted by proudNMAmember
    Well, I need a new clutch on my 2000 Hyundai Accent. I have over 167,000 miles on it. Since it was having a hard time going into gear I thought it might be the tranny linkage. Wrong! This mechanic asked me how I got so many miles on my car anyway? So, I guess I got some good wear on the original clutch. Any suggestions before I have the big "clutch" changed? Mk
    Wow, that is great mi to get from a clutch. All highway miles I assume. Just make sure they replace with a original manufactures clutch and no generic crap. I am sure I do not need to explain about not getting a refubished clutch, I am surprised they even make them. Beside a clutch job should be relatively cheap. Hey I don't suppose this was covered under warranty?

  3. #3
    Professional
    Join Date
    May 2005
    Posts
    992

    Default

    How much is the clutch going to cost to replace? The Hyundai with that much mileage I would assume does not have much of a life left and only more things will go out. Hyundai's are very cheaply priced, I would just get another one brand new with the warrantys.

  4. #4
    Yoda of Radar
    Join Date
    Dec 2004
    Location
    In front of my computer
    Posts
    10,773

    Default

    Well wait a sec, what is the problem?

    If the car is recalcitrant to go into gear, then the clutch disc is not worn at all. Your problem in that case would be a misaligned shift linkage (or a loose shift cable) or possibly a worn clutch master or slave cylinder.

    To test for worn clutch, go into 5th gear at around 1000 r/min and floor it. r/min and mi/h should increase proportionally. If the engine just revs up and the car doesn't really accelerate the clutch disc is worn.

    167 k miles isn't that great, my dad had 250 k miles on his Mazda and the disc was still good for a few more, we changed it because the tranny was out so what the heck...

    You got a turbo in that Accent?

    Changing the clutch on an Accent probably is relatively simple -> remove gearbox. You can do this in your driveway relatively easily. Hey look the official Hyundai service manual !http://www.hmaservice.com/login/loginPage.jsp

  5. #5
    Power User
    Join Date
    Aug 2005
    Location
    South Florida
    Posts
    4,150

    Default

    Quote Originally Posted by SmaartAasSaabr
    Well wait a sec, what is the problem?

    If the car is recalcitrant to go into gear, then the clutch disc is not worn at all. Your problem in that case would be a misaligned shift linkage (or a loose shift cable) or possibly a worn clutch master or slave cylinder.

    To test for worn clutch, go into 5th gear at around 1000 r/min and floor it. r/min and mi/h should increase proportionally. If the engine just revs up and the car doesn't really accelerate the clutch disc is worn.

    167 k miles isn't that great, my dad had 250 k miles on his Mazda and the disc was still good for a few more, we changed it because the tranny was out so what the heck...
    167 isn't that great, holy hell, I have never heard, heck even my mechanic has never seen a clutch go much beyond 100k, perhaps it is becasue of our heavy stop and go traffic. As far as the car not going into gear, whatever the reason the clutch is more likely. Unless you suck and driving and you have chewed your syncros down to nothing. By then like Z06Vette said, it's not worth a new tranny, better off getting a new Hyundai with new warranty.

  6. #6
    Yoda of Radar
    Join Date
    Dec 2004
    Location
    In front of my computer
    Posts
    10,773

    Default

    Well if the clutch is worn, it is slipping. When the pedal is depressed, you should have approx 100% slippage... if it's worn then the slippage when the pedal is down is still 100 %, so shifting should be the same... :P

    Now if something happened that was causing the clutch not to disengage all the way, like worn seals in the hydraulics, then the clutch wouldn't slip enough and the gears would be hard to get.

  7. #7
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default Re: clutch

    Yes smarta$$saab, gears hard to get. That is it! I just wish clutches would go out when you have the money in hand. I guess thanks for having a credit card. Thanks guys for the support. Mk

  8. #8
    Radar Fanatic
    Join Date
    Feb 2005
    Location
    Earth
    Posts
    2,357

    Default

    Well, I had a clutch go on my Volvo that prevented me from getting it into gear without rev-matching. Thing is, it wasn't the clutch disc. It was a few broken spring fingers on the pressure plate that caused it to sit at an angle (don't ask me how) so that it an edge constantly in contact with the clutch disc.

    I may need to get intimate with my clutch this summer due to a bad throwout bearing. It might turn out to be something else rattling/sqeaking in the release mechanism but it isn't looking good.

  9. #9
    Yoda of Radar
    Join Date
    Dec 2004
    Location
    In front of my computer
    Posts
    10,773

    Default Re: clutch

    Quote Originally Posted by proudNMAmember
    Yes smarta$$saab, gears hard to get. That is it! I just wish clutches would go out when you have the money in hand. I guess thanks for having a credit card. Thanks guys for the support. Mk
    Doesn't sound that difficult, #1 check that there is fluid, unless it's a cable clutch then make sure the cable is adjusted right...

  10. #10
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default Re: clutch

    Wow, I think I have narrowed down the problem of the clutch a little more. I had a mechanic try to take off in 5th gear from a dead stop, and he said it wasn't slipping. So this leaves either the shift linkage, slip seal inside the hydraulic system, or the transmission synchronizer. Wish me luck. I am going to 2-3 places tomorrow to have it diagnosed. Mk

 

 

Similar Threads

  1. AC clutch problem
    By TRun in forum Car Talk
    Replies: 8
    Last Post: 04-07-2011, 11:58 PM
  2. Shifting without the clutch?
    By DogGod in forum Car Talk
    Replies: 36
    Last Post: 01-16-2008, 10:56 AM
  3. Clutch Issue
    By marker227 in forum Car Talk
    Replies: 22
    Last Post: 06-25-2007, 07:39 PM
  4. Clutch question
    By wanderingmind in forum Car Talk
    Replies: 8
    Last Post: 04-01-2007, 02:47 AM
  5. BENZ CLUTCH.. KILLED!
    By maskellxx in forum Car Talk
    Replies: 2
    Last Post: 03-30-2007, 07:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •