Different power, different pulse rate, tighter beam on the Ultralyte, who knows for sure.Quote:
Originally Posted by speed-demon
Printable View
Different power, different pulse rate, tighter beam on the Ultralyte, who knows for sure.Quote:
Originally Posted by speed-demon
X2 That has been my point this entire time.Quote:
Originally Posted by speed-demon
Were there any other guns in use at the time? And not necessarily aiming in the same direction as the vehicle being targeted. Also, was the sun out and where was it located?
It could also simply be elevation change as everyone else mentioned. Maybe the heads on those particular vehicles aren't as level as the other cars and the elevation changes were enough to exploit this?
No other guns in use except the one that we were testing at the time. The only shooter all day was Taylor. We were trying to remain as consistent as possible.
These two cars were the only red cars, the two black cars did much better.
You guys with the red cars have close up shots of the heads. Elevated pictures and a side view would be cool also.
See the first post I think Taylor reposted the pics there.Quote:
Originally Posted by PMoth
That picture is still questionable. The heads don't look straight. It looks as if they follow the contour of the grill slat above them. So, if the heads are pointing slightly towards the road side, there is cause for concern. Might not have been an issue at the first ATL JF, but it could be now.Quote:
Originally Posted by category4
Everyone's heads looked pretty good before we started the event. The only question we had was on one of the black Mercedes but his setup tested out pretty good so we did not change anything.
I am going to recheck everything on mine once I get back into town, just to see if it needs to be tweaked.
I saw Cat4's setup a couple of weeks ago. While I didn't get a level out, I got a good look at the heads, and they appeared to be aligned correctly to me.Quote:
Originally Posted by PMoth
That's understandable and I believe you. But suffering 1000+ft center-mass punch throughs against a gun that is easily jammed by the LI points to faulty product or a less than optimized install. I mean, I could be totally wrong, it could be the red paint that's letting the Cat4 and Rsat down.Quote:
Originally Posted by M6D