Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Hardwire

  1. #1
    Newcomer
    Join Date
    Nov 2005
    Posts
    23

    Default Hardwire

    Hey guys, I know this topic must have been dicussed about a thousand times, but can someone fill me in on how to hardwire a detector to my car (i have the cable i'm going to be using, and decided to go w/o the smartcord for simplicity). I'm not exactly sure what I have to do, but I've noticed that a lot of you have done this, so I figured I'd ask. I'm also not very old (ie. 16) so I'd really appriciate it if someone could give me detailed directions. Right now I'm driving a 97 ES300 Lexus. Thanks a lot.

  2. #2
    Newcomer
    Join Date
    Nov 2005
    Posts
    23

    Default

    btw should i be disconnecting the battery before i do this. thanks again

  3. #3
    Power User
    Join Date
    Aug 2005
    Location
    Southlake, TX
    Posts
    4,136

    Default

    what do you mean, a cable? just a telephone wire that youll use or are you going to extend the stock smartcord with a RJ11 bridge connector?

    id think it would be easier with the kit... i used it with no real issues... but i gotta know what youre trying to be able to help you

  4. #4
    Newcomer
    Join Date
    Nov 2005
    Posts
    23

    Default

    i got the hardwire kit from escort, but i'm wondering how to install it. So far, i've found where the acc fuse is in the box, but now i'm wondering how to run it. should I be going through the air vents on top of the dash into the engine area or what?

  5. #5
    Power User
    Join Date
    Aug 2005
    Location
    Southlake, TX
    Posts
    4,136

    Default

    Quote Originally Posted by LexX50
    i got the hardwire kit from escort, but i'm wondering how to install it. So far, i've found where the acc fuse is in the box, but now i'm wondering how to run it. should I be going through the air vents on top of the dash into the engine area or what?
    keep the power cable as short as possible so that you dont lose too much power in the line, id find your internal fuse box and run it into the radio fuse or something else that you know is only on when the car is on... you could wrap the wire around one end of it and put the fuse back in or you can buy yhis add-a-circuit part in the electrical section at Autozone, basically a Y adaptor for a fuse terminal with a wire sticking out of it where the kit's power wire is going in

  6. #6
    Power User
    Join Date
    Aug 2005
    Location
    Southlake, TX
    Posts
    4,136

    Default

    if you want it low do it like my friend, yes, through the windshield defogger vent things, if you want it high, run it with the side pillar/tower thing that runs up the side of your windshield (you know what im talking about?) and set it up somewhere near the rear view mirror

    oh and no you dont need to disconnect the battery... you can if you want though

  7. #7
    Newcomer
    Join Date
    Nov 2005
    Posts
    23

    Default

    well, i'm going to be keeping it high, and i'm gonna run down the A pillar, but i'm wondering if the only way in was through the defogger things, and i'm wondering if the ac fan or whatever wont cut it up. Like i said, i'm really new to this kind of stuff; my wire has a solid prong thing in a case and another wire that has a circular thing attached to it. This is exactly what I bought: https://www.escortradar.com/cp/cgi-b...irect_wirecord

    thanks, i really appriciate the help

  8. #8

    Default

    Does the ES300 have a sunroof? If so, since you're mounting it high, wiring to the electrical that is going to the sunroof is good because it usually comes on when the key is in the ON position, plus you wont have to route the wire all over the place.

    The little round thing at the end of your wire is for ground. You can either attach it to a ground wire in the car (usually black or green) or what might be easier is just to find a screw somewhere that goes into metal that has continuity with the body of the car (this is why it has a ring shape).

    The only challenge then is to find the 12v wire going to the sunroof. I won't elaborate just yet because you may not like this idea.

  9. #9
    Newcomer
    Join Date
    Nov 2005
    Posts
    23

    Default

    actually, i'm liking the idea. the only thing that is troubling me about it is how i can get to the wiring.

  10. #10
    Power User
    Join Date
    Aug 2005
    Location
    Southlake, TX
    Posts
    4,136

    Default

    ummmmm....... im asuming the sun/moonroof wire would only be getting power when the unit is in opreation (when the button/switch is being pressed) and not recieving any power while idle, but this is all assuming that you're tapping the wire after the switch and before the motor (between the 2 components)... id just stick to the traditional way, cuz youd also have to get the upholstery stuff covering all that circuitry off, I tried that while trying to get my acura's moonroof to be remote operated..... not an easy task, especially if youre not totally comfortable with yourself taking apart your car

 

 

Similar Threads

  1. Hardwire V1
    By Solitaire in forum Valentine One
    Replies: 2
    Last Post: 12-06-2009, 12:17 PM
  2. V1 hardwire
    By Scott8659 in forum Valentine One
    Replies: 4
    Last Post: 07-08-2009, 01:20 PM
  3. hardwire
    By beeesmitty in forum Radar Detectors - General
    Replies: 2
    Last Post: 06-12-2009, 09:41 PM
  4. bel hardwire??
    By jdreynss in forum Beltronics
    Replies: 5
    Last Post: 08-14-2006, 03:30 PM
  5. Hardwire help!!!
    By nickmv in forum Radar Detectors - General
    Replies: 3
    Last Post: 06-12-2006, 10:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •