Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Lead Foot
    Join Date
    Jan 2008
    Posts
    469

    Default Self calibration - how often?

    How often does the 8500 X50 self calibrate? In the six-ish years I used the standard 8500 I think it self calibrated twice.

  2. #2
    Advanced Member
    Join Date
    Dec 2004
    Location
    Michigan
    Posts
    7,509

    Default

    The X50 calibrates itself at start-up and periodically during operation, without indicating anything on the display. One person on here was told by a customer service rep that it calibrates itself every 8 minutes.

    If it actually shows self-calibration on the display, that is an indication that it is having some trouble calibrating normally.

  3. #3
    Yoda of Radar
    Join Date
    Mar 2005
    Location
    Rottweiler Land
    Posts
    10,420

    Default

    No doubt the 8500 has a much better repair/track record than the X50

  4. #4
    Lead Foot
    Join Date
    May 2007
    Location
    OKC Metro
    Posts
    478

    Default

    If you power on the X50 in the area of a door opener, does this affect the calibration at start-up?

  5. #5

    Default

    Quote Originally Posted by aradarnut
    If you power on the X50 in the area of a door opener, does this affect the calibration at start-up?
    99% of the time, no. Once in a blue moon you might encounter a really old door opener whose frequency isn't stable due to power problems. This could cause a Self Cal message when powering up in front of such a door opener. Simply head out of the parking lot and power up again. All will be fine.

  6. #6
    Professional
    Join Date
    Oct 2006
    Posts
    1,299

    Default

    Quote Originally Posted by jimbonzzz
    The X50 calibrates itself at start-up and periodically during operation, without indicating anything on the display. One person on here was told by a customer service rep that it calibrates itself every 8 minutes.

    If it actually shows self-calibration on the display, that is an indication that it is having some trouble calibrating normally.
    Do you happen to know how long does the calibration last?

    Hmmm... could that explain why sometimes my X50 is sluggish to respond to pressed buttons - only for a few seconds though. Something like a PC waking up from a low-power mode, or like some app is hogging up 100% of the CPU

  7. #7
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,805

    Default

    Quote Originally Posted by ahmadr
    Hmmm... could that explain why sometimes my X50 is sluggish to respond to pressed buttons - only for a few seconds though. Something like a PC waking up from a low-power mode, or like some app is hogging up 100% of the CPU
    This is usually a sign that a Self-Cal is imminent.

    Basically, AFAIK, this is what happens.

    The X50 is constantly sweeping its LO looking for radar signals. While it is doing this, it also checks its own calibration by looking for harmonics against a crystal-based second LO (Jim can describe this better than I can). Basically it's going, scan X, scan K, scan Ka, scan for calibration, rinse and repeat.

    If it "misses" the calibration signal, it might pause for a moment to "search" for it. If that search takes less than a second or two, it'll happen transparently to the user. If the search takes longer, Self Cal will appear on the display, and it'll go into a more extensive calibration check. If that check passes, the unit resets and goes back to normal. If not, Service Required appears.

    If the unit seems to be hesitating (this can be clearly observed if you select the scanning dot or scanning plus sign in the PILOT display), it is probably having to search more often for the calibration signal, meaning it is either going out of tune or starting to fail. Chances are you'll see Self Cal soon.

    You may want to try doing a factory reset (hold down all 3 buttons when turning the unit on). Sometimes that will help. All your programmed settings will be erased if you do this.
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


  8. #8
    Radar Fanatic
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    1,676

    Default

    Quote Originally Posted by kpatz
    If the unit seems to be hesitating (this can be clearly observed if you select the scanning dot or scanning plus sign in the PILOT display), it is probably having to search more often for the calibration signal, meaning it is either going out of tune or starting to fail. Chances are you'll see Self Cal soon.
    You know, I fear that my X50 may be in this phase. Maybe im being paranoid, but sometimes the scanning dot lags (not real bad, but simply not a smooth flow either) I've had about 2-3 self Cal message in the past month. No service required yet. I wonder if occasional scanning dot lag is not bad?

  9. #9
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,805

    Default

    If you're getting that many Self Cals, your X50 is showing signs of illness. I'd send it out to get fixed. You don't want to miss an early warning of a trap because your X50 was attempting to check its calibration.
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


  10. #10
    Radar Fanatic
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    1,676

    Default

    Quote Originally Posted by kpatz
    If you're getting that many Self Cals, your X50 is showing signs of illness. I'd send it out to get fixed. You don't want to miss an early warning of a trap because your X50 was attempting to check its calibration.
    So you think 2-3 self cals in a month or two is bad eh? Need you to confirm this patz because I think i have a month or two warranty left.

 

 

Similar Threads

  1. Replies: 3
    Last Post: 09-28-2010, 07:44 PM
  2. self calibration??
    By stamp4 in forum Beltronics
    Replies: 7
    Last Post: 11-18-2007, 02:08 PM
  3. x-50 Self Calibration
    By jtslmn720 in forum Escort
    Replies: 6
    Last Post: 09-18-2006, 08:51 PM
  4. calibration
    By SCjohn in forum Radar Detectors - General
    Replies: 6
    Last Post: 08-16-2005, 05:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •