Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    Good Citizen
    Join Date
    Aug 2005
    Location
    Not the East Coast!!!
    Posts
    174

    Default

    Quote Originally Posted by SCjohn
    Quote Originally Posted by JamSession
    Quote Originally Posted by yemntftb
    so if I order the smartcord for the 8500 and take it over to bestbuy they can hardwire it for me? Or is it easy enough to do it myself... I no for a fact that the subaru does not have any electronics in the rearview mirror, the auto may have auto dimming but I'd have to look into it as the car is not with me with right.
    I would not pay anyone to hardwire the detector as anyone with a minimal understanding of automotive electronics should be able to do it themselves. I hardwired mine in 30 minutes and I am by no means an electrical engineer. Believe me when I tell you it is not hard. Several years ago I had a Subaru Outback which I hardwired my V1 to and it was no different than any of the other 8 vehicles I've hardwired over the years. The easiest way in my opinion is to run the positive lead to your fusebox under the steering column. Remove the fuse for your radio, insert the positive wire, then reinsert the fuse. Then find a good ground which will not be that hard for your ground wire. The rest of the install will be purely cosmetic as you try to hide the wire and decide where to position the detector. I have always mounted it on my visor because it is harder to spot from outside and it is also somewhat protected from heat and direct sunlight. Keep your money in your wallet and give it a try

    Ed
    Could I use a regular phone wire to hardwire it this way? Will it use the same fuse as the stereo? Or will I still have to purchase a hardwire kit with the fuse built-in?
    You could but I would order the hardwire kit from Roy for $30. Not only do you get the remote mute but it comes with an inline fuse to protect the detector.

    Ed

  2. #22
    Newcomer
    Join Date
    Aug 2005
    Location
    MA
    Posts
    66

    Default

    By way of a recap, you have three options for the wiring:

    1. Buy the smartcord
    2. Buy the regular hardwire kit
    3. Homebrew your own

    #3 is not going to be hugely cheaper than #2 unless you have all the materials on hand. Reading this thread, I'd suggest you go with #1 or #2. The choice between smartcord and regular kit depends a lot on where the RD will be mounted (mostly, how easily can you reach the mute button on the RD and can you put the little remote display/control somewhere easier to reach). The other thing the smartcord might let you do is run the RD dark so that other motorists aren't trying to read your RD, but you'll lose the ability to run the X50 in Expert or Spec mode, which is one of the best reasons to own an X50 IMO, so the display issue wouldn't affect my decision (YMMV).

 

 

Similar Threads

  1. Beginner to the Radar Detector Scene!
    By DanOpi in forum Introduce Yourself
    Replies: 5
    Last Post: 03-23-2013, 05:18 PM
  2. Replies: 2
    Last Post: 06-09-2011, 09:34 AM
  3. Beginner scanner question.
    By jeef in forum Scanners, Ham Radios, & CB's
    Replies: 4
    Last Post: 07-14-2010, 05:48 AM
  4. Hardwire using fusebox questions
    By lordhawhaw in forum Valentine One
    Replies: 12
    Last Post: 05-31-2008, 11:42 PM
  5. Beginner looking for Scanner and Understanding
    By Indiana Jones in forum Scanners, Ham Radios, & CB's
    Replies: 14
    Last Post: 02-14-2007, 11:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •