djrams80

[djrams80]

Will the Redline become inferior to the Magnum once it receives the update?

They'll both get the update. An M3 with the BS/RDR update will outperform one without it.

[AvsBest]

Can you please explain that line, I am not sure I got it right

I ran the V1 and the 9500ci(basically the same performance as a RedLine) together for over three years. In that time, the V1 missed around twice as many I/O shots than the 9500ci did, against real world LEOs. Basically, it's obvious that the V1 performs better against Q/T. Anyone with a radar gun can easily test this. But, in the real world, my experience is that the Belscort M3's better sensitivity, trumps the V1's better reactivity against I/O.

What? I am shocked on that one. I can't make the V1 miss an I/O shot while the Redline misses about 75% of the shots unless it is a high reflective area

[djrams80]

What? I am shocked on that one. I can't make the V1 miss an I/O shot while the Redline misses about 75% of the shots unless it is a high reflective area

Right, but you're testing the reactivity of the detector with quick shots, where the V1 crushes the RedLine. Where the RedLine shines is sensitivity, so there is a window where the V1 won't detect what a RedLine will. From my experience, these type of encounters are more prevelant, at least in my area. Also, the V1 is known to park of a frequency for a while, after it detects an I/O shot. You have to wait at least 10 seconds in between shots when testing a V1.

[AvsBest]

What? I am shocked on that one. I can't make the V1 miss an I/O shot while the Redline misses about 75% of the shots unless it is a high reflective area

Right, but you're testing the reactivity of the detector with quick shots, where the V1 crushes the RedLine. Where the RedLine shines is sensitivity, so there is a window where the V1 won't detect what a RedLine will. From my experience, these type of encounters are more prevelant, at least in my area. Also, the V1 is known to park of a frequency for a while, after it detects an I/O shot. You have to wait at least 10 seconds in between shots when testing a V1.

That's interesting. What would that be?

[djrams80]

That's interesting. What would that be?

I'm referring to the difference in sensitivity. There are signals that the RedLine can detect, that are too weak for the V1 to detect, because of the difference in sensitivity between the two units. Here's a couple of examples.

[Digital Dude]

Rumor has it BS and RDR will be coming for the Redlne for users that have Escort LIVE. That will be your lower cost alternative.

You need a new royal family. I like Kate!

I recently got back into RDology since 2010, so you'll need to put ne up to speed. What are BS and RDR?

I don't know what it is, but it seems it is what everyone wants. I would google it.

You, sir, are a troll. Please logout from the forums and drown yourself immediately. And yes, I've seen your other post about being arrested for an "energy device".

Please don't give information if you don't know what you're talking about.

Sorry, but I don't think this person is a troll and that was a real grown up reply. BS = Band segmetation RDR = Radar detector rejection filtering. Search.

Thanks! Even though I wasn't the one asking I too was wondering what 'RDR' stood for. In fact I did google it, searched the forum and contacted the Pope and nobody could help. So, I doubled checked my driver's license and sure enough, I was born yesterday!