Results 1 to 7 of 7

Thread: New guy here

  1. #1

    Default New guy here

    Hey everyone,

    I just found this site a few days ago and have been doing a lot of reading, but I figured it's time to sign up so that I can participate in the discussions.

    I've had a couple of detectors in the past, the first a cheapo cobra that I had to learn the hard way was a piece of garbage. The second a Bel V940 which served me fairly well until it was a victim of a smash and grab out of my car when I left it mounted on my window overnight. So recently I decided that I needed to get a detector again, and I found a refurbished Bel V995 on Amazon for $150 and ordered it a couple days ago.. It's currently in the mail, so I have no idea if it's any good or not, but I figured it has to be at least as good as the 940.

    I like the idea of being able to see the exact radar freq so as to differentiate from falses. Can anyone tell me what other differences/improvements I can expect from the 995 as opposed to the 940?

    Also, I recently read a thread where they were discussing that freqs usually come from what sources, and they said that perhaps it was a "Cobra".. What is a Cobra?

  2. #2
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: New guy here

    Assuming it's working properly, the v995's Performance will be exactly the same as your v940, with better features, including the frequency display you already mentioned.

  3. #3
    snoopyc4
    Guest

    Default Re: New guy here

    Welcome to the forum

  4. #4
    Radar Fanatic
    Join Date
    Jul 2008
    Location
    Nashville, TN
    Posts
    2,306

    Default Re: New guy here

    Quote Originally Posted by num1bearsfan View Post
    Hey everyone,

    I just found this site a few days ago and have been doing a lot of reading, but I figured it's time to sign up so that I can participate in the discussions.

    I've had a couple of detectors in the past, the first a cheapo cobra that I had to learn the hard way was a piece of garbage. The second a Bel V940 which served me fairly well until it was a victim of a smash and grab out of my car when I left it mounted on my window overnight. So recently I decided that I needed to get a detector again, and I found a refurbished Bel V995 on Amazon for $150 and ordered it a couple days ago.. It's currently in the mail, so I have no idea if it's any good or not, but I figured it has to be at least as good as the 940.

    I like the idea of being able to see the exact radar freq so as to differentiate from falses. Can anyone tell me what other differences/improvements I can expect from the 995 as opposed to the 940?

    Also, I recently read a thread where they were discussing that freqs usually come from what sources, and they said that perhaps it was a "Cobra".. What is a Cobra?
    You will be able to turn off X band if it isn't used in your area.

  5. #5
    Good Citizen
    Join Date
    Jul 2009
    Posts
    111

    Default Re: New guy here

    Quote Originally Posted by num1bearsfan View Post

    Also, I recently read a thread where they were discussing that freqs usually come from what sources, and they said that perhaps it was a "Cobra".. What is a Cobra?


    they are referring to a cobra RD.

    garbage detectors (cobras/RMR/etc) MAY send out false K and KA alerts because of the bad shielding of the detector

  6. #6
    Good Citizen
    Join Date
    Jun 2009
    Posts
    88

    Default Re: New guy here

    They're the most used RD, but they generally suck. Some of the top models give good performance, but any other detector from the other 4 (Valentine, Whistler, Beltronics, or Escort) will be many times better.

    RMR is Rocky Mountain Radar, and they claim to scrammble radar signals, but it only works in about a 3 ft. range from the gun, which is useless.

  7. #7
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: New guy here

    Welcome aboard!
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •