Results 1 to 10 of 10
  1. #1

    Default Hello from Canada

    I am new to this forum and would appreciate some advise about mounting LI front heads on 2006 Infiniti M35, behind the front grille.
    The horizontal slots (openings) are wide enough to put the heads behind the grille and it would give clear view ahead. However there are some vertical braces at the back part (to provide strength to the grille).
    On the LI- front sensor- the receiver diode (bubble) is on one side and the transmitter diod is close to the other side. I would like to mount the heads in such position that the vertical brace of the grill would be in the middle (between the receiver and transmitter diod). This way it would not block the line of sight of either diodes.
    Would you be so kind to let me know whether this mounting position would be satisfactory, or not?

  2. #2
    Speed Demon
    Join Date
    Jun 2009
    Location
    Communist Province of Ontario
    Posts
    668

    Default Re: Hello from Canada

    Behind grille = Epic Fail! What province are you in?

    Wolfpacal

  3. #3
    Power User
    Join Date
    Nov 2007
    Location
    Htown
    Posts
    3,253

    Default Re: Hello from Canada

    Welcome to the forum..
    take some pics and show us the install, so we can better assist you with the re-location of your heads...

  4. #4

    Default Re: Hello from Canada

    Please find picture of the LI sensor head (as attachment), showing the locations of the receiver and transmitter diodes. I know that if I mount behind the grille, both diodes must have unobstructed line of sight. The spacing between the horizontal chrome-plated pieces are sufficient to provide clear wiev ahead. There are vertical bracings at the back of the grille (to provide structural strenght).
    I plan to mount the LI heads behind the horizontal slot (opening) of the grille and the vertical bracing would be in the middle (between the receiver and transmitter diodes). The vertical bracing is approximately 5-6 mm wide.
    I hope that the attached picture will open, I am not familiar with this process.
    Attached Images Attached Images

  5. #5
    snoopyc4
    Guest

    Default Re: Hello from Canada

    It sounds like your jammer heads are too far recessed into your grille. You need to bring your jammer heads out so that part of the head is in front of the grille itself. More pictures Of the actual install would be nice.

  6. #6

    Default Re: Hello from Canada

    Using laser jammers, or even installing them in your vehicle is illegal in my location.
    Therefore I have two choices only:
    - either not bother with them (not buy them), or
    - hide them behind the grille, completely invisible.
    I am aware that stealth mounting might reduce the performance. My front grille has horizontal slots (openings) where the diodes will have straight view ahead.
    Planning to put two LI sensor heads in the second upper slot, close to the headlight.
    Do I waste my money installing them behind the grille? If not, I hope their price will drop a little after Christmas and buy the LI Dual.
    See attached photos of my car.
    Attached Images Attached Images

  7. #7

    Default Re: Hello from Canada

    Since I must install the sensor-heads behind the grille (see the pictures in the previous post) I would like to get an expert advise: whether is it a total failure putting them there, or just a reduced performance?
    I think the receiver and transmitter diodes will have a straight view ahead through the horizontal opening of the grille. Should I buy the L.I. Dual ?
    It is too much money to waste, if it is not working.
    Any help or advise would be appreciated.

  8. #8
    Speed Demon
    Join Date
    Sep 2009
    Location
    Bat Cave
    Posts
    780

    Default Re: Hello from Canada

    If you put them inside the grille it will be total failure. You should put them inside the slats so they have a clear view ahead. This may require cutting the slats a little.

    I wouldn't worry about the police. While jammers are illegal, the police don't know what to look for. On a luxury car like yours you can say it is the laser-guided cruise control and collision avoidance system.

  9. #9

    Default Re: Hello from Canada

    Quote Originally Posted by Cosmopolitan View Post
    Since I must install the sensor-heads behind the grille (see the pictures in the previous post) I would like to get an expert advise: whether is it a total failure putting them there, or just a reduced performance?
    I think the receiver and transmitter diodes will have a straight view ahead through the horizontal opening of the grille. Should I buy the L.I. Dual ?
    It is too much money to waste, if it is not working.
    Any help or advise would be appreciated.
    I will give you my opinion of someone living in a banarea :

    understanding your concern of stealthtiness , I would go ahead
    and install them the least recessed you judge , at worst you will
    have a reduced performance but you will have basic protection ...
    impossible to put it in % without tests against real lasers.

    This system is very sensitive and the spreading pattern
    of the emitter is excellent .

    My philosophy : the slightest protection is better than none

    Purists will disagree.
    O divine art of subtlety and secrecy!
    Through you we learn to be invisible, through you inaudible;
    and hence hold the enemy's fate in our hands.

    -- Sun Tzu, The Art of War, c. 500bc

  10. #10
    Lead Foot
    Join Date
    Sep 2006
    Posts
    468

    Default Re: Hello from Canada

    Even if you recess them 1" you will still get pretty good protection I bet. They will be difficult to see unless you really have them sticking out, which you will not. For an OPP to see them they will have to be really looking hard for them, and laser is used so little I don't think you will have much to worry about. I worry more about I/O radar these days.

 

 

Similar Threads

  1. hello from nb canada
    By acadien1 in forum Introduce Yourself
    Replies: 5
    Last Post: 09-12-2009, 02:52 PM
  2. where to buy in canada
    By balou in forum Beltronics
    Replies: 12
    Last Post: 09-01-2008, 06:44 PM
  3. Canada: OPP and SQ
    By JDM_STI in forum Radar Detectors - General
    Replies: 13
    Last Post: 10-11-2006, 07:39 PM
  4. POP in Canada?
    By yojcboy in forum Beltronics
    Replies: 4
    Last Post: 07-26-2006, 03:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •