
Originally Posted by
Hessen
Examine the firewall of your vehicle, from the engine compartment, find where the main wiring harness is, there will be a large rubber grommet there, that's your access point.
You will need a wire coat hanger, lubricant. Tape up the ends of the LI head wires, and tape that to the end of the straightened coat hanger. Pry the grommet gently with a screw driver, to make an opening so you can fed the coat hanger through there.
Ideally have someone inside car to assist pulling the wires through.
There may also be a grommet around where the steering column comes through, that can be another access point.
Good Luck.
Bookmarks