Quad hookup question

**srtga** · 02-20-2011, 05:44 PM

I tried searching, looked for the instructions...

Anyway, do the front hook to 1 and 2 and the rears to 3 and 4?

Can't remember...

**radarrob** · 02-20-2011, 05:49 PM

2 and 3 for front 1 and 4 for rear correct me if I'm wrong

**aa2033** · 02-20-2011, 06:04 PM

.

**Vic** · 02-20-2011, 06:11 PM

LI Dual uses #2,3 only

LI Quad uses #1,4 for Front ; #2,3 for Rear.

As per the instructions LI provides.

**srtga** · 02-20-2011, 07:25 PM

Thanks guys! I got all the wires routed and the head mounting worked out.

**category4** · 02-20-2011, 07:32 PM

I don't think it really matters if you have a quad. It matters on a dual because the CPU is looking for the heads on a certain port, if it does not see a head there it generates an error.

**Z06Boricua** · 02-20-2011, 10:46 PM

You must connect the front/rear wires to jacks 1/4 and 2/3. It doesn't matter which you connect to 1/4 or 2/3, as long as you pair the fronts and rears and connect them to those ports. I just verified this with Cliff as I was doing my install on my Mazda. Basically, don't connect the fronts to 1/2 and the rears to 3/4 or vice-versa.

Jose