ZR-3 is malfunctioning...

[Palut]

Got in my car this morning and the ZR-3 gave me a double brap error sound. The front shifter light stays on on the display, meaning that the front heads aren't communicating properly with the controller. I checked to make sure the wires are plugged securely into the control box, but it's too dark tonight for me to thoroughly inspect the whole length of the wires.

Does anyone have any experience with this problem? I'd love to know if there is a way to get this fixed these without replacing the heads or paying more money to the people I bought it from.

[anjoem]

Well firstly, you have to identify which head is giving a problem....

In order to do this, plug one of the front heads out and subsitute it with the rear head... Reason for doing this, is that you need 2 "front" heads plugged into the control box, in order for the front to work. Alternate to the other front head if the 1st is not problematic.

Once you have identified which head... then check the connector of that head, if its not that, then you gonna have to inspect the entire cable for kinks....

[anjoem]

Any luck Palut?

[Palut]

I've had no time to do anything much to it yet. I found out that Front shifter 1 is the problem, #2 doesn't give an error message, so I just left the rear shifter head plugged into front #1's slot so I'll at least have one head front and one had rear for the time being.

[anjoem]

Cool... keep us updated...