I finally got a chance to test the Dodge Ram 2500 Quad cab Hemi today, with Suf Daddy's LTI Marksman. All targeting began at around 2000-2100 FT. My test area limits my range to 2000-2100 FT., and then there is a small rise. I’m sure I could get a lock from further out on the Dodge Ram that we tested today. As soon as I could see the vehicle and pull the trigger I got an immediate lock. The base runs results are almost meaningless so I only took a couple of shots. The vehicle is metallic silver and pretty much a worst-case scenario. Here are the results:
Center mass without jammer on and no front plate:
Run#1 2053FT.
Passenger side headlight, without jammer and no front plate:
Run#1 2105FT.
We then switched the jammer on and the fun began:
Center mass jammer on with no front plate plate:
Run#1 JTG Run #2 JTG Run #3 JTG
Passenger side headlight:
Run#1 JTG Run #2 JTG Run #3 JTG
Driver side headlight:
Run#1 JTG Run #2 JTG Run #3 JTG
I also tried some panning shots, trying my best to find a hole somewhere but couldn’t find one. I targeted the headliner and still was unable to get a lock. I figured that I’d get PT. Somewhere considering the size and reflectivity of this truck, but once again no dice.
I made sure that the laser gun was braced on the shooting truck’s window, with the stock in my shoulder to make sure the gun was held steady.
I am including a picture of the truck so that you can get a good look at what I was up against.
http://i158.photobucket.com/albums/t...n30/dodge2.jpg
If you look closely you can see the jammer heads mounted just below the grill.
That's all for now..................![]()
![]()




Reply With Quote

Bookmarks