What the hell is the Laser Deceptor? (Pics)

[edweird]

I did some searching last night, and some reading. Seems like for a couple months there were posts and a web site, but currently nothing much.

I also thought some of the same folks were running a different LJ on their vehicles, and saying it was the best?

"If in doubt, wait for GOL to test it out."*

*retail versions only

[charles charlie charles]

I have seen videos of the laser deceptor working and it jams great, it is a LED jammer and is from europe. I cant remember the links to the videos but ill post em when i find them...the jammer seems pretty good for a LED jammer and the alert tones are great..I wish my lPP sounded like that

Like I said earlier, I have the exact unit branded "Microfuzion" and have tested it against my PLII.

Both heads were mounted above my rear plate and only offered protection when I specifically aimed at the plate. If I aimed either side more than about 6 inches it failed to jam. Also, it did not jam my PLII until the car was 300ft past me.

It's a rip off of another product and fails to do what it is meant to. My LPP is way ahead of it.

[Snake Plisken]

I saw this post and wanted to add my .02 cents. The "MicroFuzion" that is sold on the internet says it just is a radar detector. Is that true or is that "Microfuzion" actually a laser jammer? Someone who bought that system would by it for radar/laser detection and would never pick up radar if its really not what it says it is.

The owner stated...

"""""Out of no where, my jammer went off with the alert inside the car, and I simply coasted to slow down (did not apply the brakes at all) and when i was about 50 feet from the cop (on a side street on the opposite side of the road), i switched the jammer off to allow the officer to get a read once i was at the speed limit.""""""

Isn't it possible that he meant that he geared down so not inorder to have nose dive..one thing that a cop looks for when targeting a car? Dont you all do that when you are hit with laser? Maybe he slowly applied brakes while down shifting and meant he was not slamming on his brakes?

[Radar Roy]

This is the ol' Laser Mimic that is a knock of the Blinder and made by an Attowave subsidiary. Attowave is the same company that make the RMR stuff.

Here is a video of one of their units being tested at SML a couple years ago

http://order.wickenburgweb.com/resou...deos/Mimic.htm

I think that I still have a couple of these laying around if someone wanted one...

[Snake Plisken]

hmmmm...

Please help me understand this Roy....If this jammer is basically made by RMR, the laser deceptor should not work. Even the RMR's dont jam the PL III at any distance. In the video's that are out of this LJ as shakey as it is there are steady enough parts where you can see the jammer working, something the RMR cant prove. So then if the Laser Deceptor works and the RMR doesnt work, its hard to believe 1 single company would make a jammer that works and more popular so-called radar/laser jammer that cant work.

[nomad]

I saw this post and wanted to add my .02 cents. The "MicroFuzion" that is sold on the internet says it just is a radar detector. Is that true or is that "Microfuzion" actually a laser jammer? Someone who bought that system would by it for radar/laser detection and would never pick up radar if its really not what it says it is.

The owner stated...

"""""Out of no where, my jammer went off with the alert inside the car, and I simply coasted to slow down (did not apply the brakes at all) and when i was about 50 feet from the cop (on a side street on the opposite side of the road), i switched the jammer off to allow the officer to get a read once i was at the speed limit.""""""

Isn't it possible that he meant that he geared down so not inorder to have nose dive..one thing that a cop looks for when targeting a car? Dont you all do that when you are hit with laser? Maybe he slowly applied brakes while down shifting and meant he was not slamming on his brakes?

The Microfuzion is just a "detector." CCC is right that unless you hit it head on, it won't "detect" anything. There are some pictures on the forum of a Microfuzion slit open so you can see where the LED heads were meant to go. Just search under Microfuzion. The LaserMimic/Megajammer/Snooper SLD etc, same box but with heads, are all the same thing - POS IMHO

[Radar Roy]

hmmmm...

Please help me understand this Roy....If this jammer is basically made by RMR, the laser deceptor should not work. Even the RMR's dont jam the PL III at any distance. In the video's that are out of this LJ as shakey as it is there are steady enough parts where you can see the jammer working, something the RMR cant prove. So then if the Laser Deceptor works and the RMR doesnt work, its hard to believe 1 single company would make a jammer that works and more popular so-called radar/laser jammer that cant work.

No, these were not made by RMR, but by attowave subsidiary, Dongin Electronics. Attowave is the same company that makes the RMR stuff and the laser stick.

The Mimic was a direct knock off of the Blinder M-10 but with lower quality and powered LEDs.

The person who engineered the Mimic was Blinders first US franchise owner who had the plans and engineering from the M-10. A couple years after being dumped by Blinder International, he met up with prior Attowave techs (that were now Dongin Electronics and doing contract work with Attowave) and they reversed engineered the M-20 and came out with the Mimic.

They also sold this very same unit (some with modifications) with other names that include:
First Strike - FSLD100
Laser Tech
Road Angel
Mega Jammer
Denpa J-100
Laser Mimic
Snooper SLD950X

[charles charlie charles]

Google Microfuzion and you will find their website.

There are listed externally mounted jammers and detectors sharing the same base boxes.

The unit I have IS meant to be a jammer, just not very effective. The same hardware externals are used in their detector setup too.

I can assure all of you that it jams A LITTLE but has a very limted area of protection.

[Radar Roy]

The MicroFuzion heads look identical to the Mimic and of also the RMR-8RDS laser jamming heads (remember where RMR gets their stuff)

Also on the MicroFuzion website for their jammer look at the graphics and then look at RMR's website. Look familiar??? :-)

[charles charlie charles]

Certainly does. Same logos that's for sure.

In all fairness the stuff I bought to test is well packaged and quite well constructed, if a little "toylike" in its construction.

But at the end of the day, it fails to perform anywhere as well as it needs to to protect any size car as it can only provide some protection for a number plate alone.