Can anyone tell me in ns how fast in perfect conditions a Lidar gun can aquire a speed reading?
Can anyone tell me in ns how fast in perfect conditions a Lidar gun can aquire a speed reading?
On a tripod, i would guess well under a second (but I'm not one of the experts here). I think it only needs two distance readings... right?
1/2 second. I think they use approximately 20 returns before giving a speed.
Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
LI Quad (On Ice Cream Truck)
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)
2008 Corvette Z-51 Coupe
Escort 9500 ix (Cadillac SRX)
Depends on the vehicle. Darker vehicles take longer than light colored ones or ones with reflective material (chrome, etc) on the front:
[ame=http://www.youtube.com/watch?v=1T8wQEKrm8k]YouTube - Testing Veil G4[/ame]
LTI advertises .3 seconds.
Yep, I'd believe that. It's one of the faster ones to get a lock. Basically as long as it takes you to say dee-deet quickly, especially if aiming at plate or H/L. PLIII takes slightly longer, and the Stalker a bit longer (maybe 3/4 of a second?)
These are all just guesstimates, though. I'll see if there's some video around...
The Tru Speed can be just as quick as the UL assuming it can get a good reflection. The Pro Lite is random. Sometimes it's quick, while others it somewhat struggles to get a reading.
Here's a TS, UL, PLIII, Pro Lite, and Stalker.
http://blip.tv/file/1352186
As a side note, when I mentioned the Stalker taking long, I meant for shots over 1000+ feet.
Keep in mind these are shot through a HUD, therefore they are "shaky". A good shooter would be quicker with the weaker guns. The UL and TS and PLIII seems about right.
Sorry for all the edits![]()
Last edited by ELVATO; 02-08-2010 at 07:07 PM.
My Lti Marksman can get pretty much instantaneous lock on cars, even 2500 feet away and more if I keep it steady. Propping it using the handrail of an overpass is good enough for this. It has often given me 3000+ feet readings after a second or so. It is by far the fastest and longest range LIDAR gun I have of the 3.
The Prolaser 2 would be the second best in my arsenal. It can take a bit longer to get a reading but its still lethal.
The 100pps Ultralyte I have is also very fast but at longer ranges, the Marksman beats it hands down. I have read that the lower pulse rate is the cause of this.
I don't know the exact acquisition speed in ns for either of them but when the speed comes up as fast as the press of the button/trigger, you're in trouble against any of them.
Well under perfect conditions which is what you said, Im guessing it would be the theoretical that the manual would say.
The Truspeed I just had said .03 seconds.
Reality is a different story though. I know when I had the gun on the tripod and was shooting other cars going by (not my car with the LI), and I was just aming for whatever and quick pulling the trigger it would display a reading as soon as I pulled the trigger.
^Probably meant 0.3 secs![]()
With a good reflective surface, like a FLP, I have no problems getting a reading in .5 seconds or less with my UL. Even at distances of 1000', almost instintanious readings, .3 or .5 seconds, either way, your not going to outbrake it.
But, there are many variables. Color of the car, the angle the beam is reflecting off of, headlights vary greatly can affect the how long it takes to get a reading. Liikewise headlights at night(especially HID's) can delay the time it takes to get a reading. Operating in continous mode, having to wait 3-4 seconds is not uncommon.
IIRC, LTI's are supposed to be the fastest in acquiring speed.
Last edited by Asleeper; 02-08-2010 at 09:01 PM.
Bookmarks