Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Newcomer
    Join Date
    Dec 2009
    Location
    New York City
    Posts
    15

    Default BMW looking for jammer (LI) and mounting

    Hey guys, long time lurker on this forum filled with lots of great info. Currently I have a 2010 (e90) BMW 335d. Great car and very fast without knowing. the diesel engine is very quiet, very powerful. At 80 mph its revving at 2k, you just hear a humming noise. I currently have a V1 for Radar and it works great, too bad in my area they use a lot of laser. I live in New York City and those NYPD Highway Patrol are beasts with laser. They park up perpendicular to the road and just shoot pull over shoot pull over all day. Its so easy for them, no challenge at all. I was recently hit with a 70 in a 50. My V1 went off and i saw him slammed on the brakes, pulled over right away. I figured i was going faster than 70 though so maybe the V1 may have helped, couldn't get a higher lock? who knows. Maybe the cop was nice and wrote me for that?

    I am looking to purchase laser jammers. I dont think I want the Blinders, i'm pretty certain I want Laser Interceptors. They are on sale at a reasonable price so I am seriously considering it. The LI Dual is $500 and the LI DUAL HP is $1000. Big difference. I dont think i need rear jammers just yet. My problem is mounting. On a BMW I've seen many different mounting:

    Behind the kidney grille - Does this work? I highly doubt it and won't try
    Dremel Kidney grille - I do not want to take a dremel to my grille, plus i dont think it would look good.
    Vertical in grille - This works but how effective for regular duals since they are meant to be horizontally mounted. Will it work? I know this would work well for the HP's because they are both vertical and horizontal mount but if i can save $500 i will.
    Under headlight or lower grille - This area is good for horizontal but it is too low IMO, would this work?

    Basically where to mount and which jammer to get? Can i get away w/ regular LI Duals vertically mounted in my kidney grille? This is what i want to do, will it work?

    In my area the laser guns used arn't the latest and greatest...

    I see there's lots of knowledge in this forum and i am looking to gain a lot! Thank you in advance for your responses.

  2. #2
    Radar Fanatic
    Join Date
    Apr 2008
    Location
    NY
    Posts
    2,789

    Default Re: BMW looking for jammer (LI) and mounting

    pm radarrob

  3. #3
    Yoda of Radar
    Join Date
    Jul 2008
    Location
    Dallas, Texas
    Posts
    14,448

    Default Re: BMW looking for jammer (LI) and mounting

    Either LI Quad on the front (combination of vertical in kidneys and horizontal in lower grille), or LI HP Dual in kidney grilles. Nothing else is a sure thing on a BMW. Dremelling the grille for a horizontal LI Dual places all protection too central, and leaves your periphery naked.

    And yes, you absolutely do need rear protection. Otherwise, you're just buying a false sense of security.

    Doesn't matter if they use the latest and greatest or not. Older guns are often the most difficult to deal with. Guns aren't really getting better, just lighter and cheaper.

    "Buy the BEST and screw the rest." - fire65

    "im intrested to see how well you do.i never seen a car JTG before would be a first for me.." - radarrob

  4. #4
    Good Citizen
    Join Date
    Dec 2010
    Location
    Central Jersey
    Posts
    117

    Default Re: BMW looking for jammer (LI) and mounting

    BMW are rough. RadarRob can install it for you and help you but theres no great easy place on a BMW. You need to sacrifice looks and some drilling for performance. The more your willing to compromise the better your setup can be. Im thinking about moving my heads to right under the headlights and just drilling. In the end its a waste of money if not in a good location. Also with your V1 you can have a great setup in the inside of the car. Im getting my interior setup by Luxury Details in Framingham, MA. Yes it is quite a drive but look at this picture and tell me its not worth it.
    Attached Images Attached Images

  5. #5
    Good Citizen
    Join Date
    Dec 2010
    Location
    Central Jersey
    Posts
    117

    Default Re: BMW looking for jammer (LI) and mounting

    If your interested in the interior stealth install contact Mike at (508) 620-7321. It is about $300 just for just that interior work but well worth it in my opinion. Mine is going in next Thursday for this install.

  6. #6
    Good Citizen
    Join Date
    Dec 2010
    Location
    Central Jersey
    Posts
    117

    Default Re: BMW looking for jammer (LI) and mounting

    For best location take a look at this picture and mount at the GREEN spots. This is from another thread on here but very useful.
    Attached Images Attached Images

  7. #7
    Good Citizen
    Join Date
    Jan 2008
    Location
    WA
    Posts
    143

    Default Re: BMW looking for jammer (LI) and mounting

    So jealous of the 335D. IIRC, it has something like 80 percent of it's peak torque available from just off idle to redline. Amazing engine! I wish more manufacturers would offer diesels in passenger cars besides Mercedes, BMW, and VW/Audi. LI is definitely what you want in your ride. Good luck with the challenging install.

  8. #8
    Lead Foot
    Join Date
    Sep 2008
    Posts
    414

    Default Re: BMW looking for jammer (LI) and mounting

    man, the bad thing about the new e9x is the lack of extra piece under the headlights....its all bumper.

    correct?

  9. #9
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: BMW looking for jammer (LI) and mounting

    HP's mounted vertical in the kidney grille is you best bet of you do not want to do a lot of cutting.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  10. #10
    Power User
    Join Date
    Apr 2008
    Posts
    4,054

    Default Re: BMW looking for jammer (LI) and mounting

    Quote Originally Posted by chris98891 View Post
    man, the bad thing about the new e9x is the lack of extra piece under the headlights....its all bumper.
    I'm getting an E60 next Easier to mount


 

 

Similar Threads

  1. Rear jammer mounting?
    By pds22 in forum Laser Jammers - General
    Replies: 11
    Last Post: 11-07-2009, 12:25 PM
  2. Mounting Jammer heads more than 70 cm apart bad???
    By dcdave78 in forum Laser Jammers - General
    Replies: 20
    Last Post: 06-30-2009, 05:34 PM
  3. Laser jammer rear mounting Question
    By y2kvette in forum Beltronics
    Replies: 6
    Last Post: 03-10-2008, 07:54 PM
  4. Your expertise What jammer & Mounting Location...
    By AirMoore in forum Laser Jammers - General
    Replies: 11
    Last Post: 12-26-2006, 04:58 PM
  5. Question on mounting Lidar Jammer.
    By Brimstone in forum Laser Jammers - General
    Replies: 1
    Last Post: 06-14-2006, 03:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •