Results 1 to 8 of 8
  1. #1

    Default RD placement problem

    Hi Guys,

    I'm having some issue trying to find a place to mount my radar detector. Since I live in Virginia, it is illegal to own one....

    I bought the visor kit to but still will show cord hang down. I have serious issue trying to hardwire the RD. No fusebox inside the car and trying to run the hardwire up to the visor kit is a nightmare. My car is just that difficult to work with.

    Do any of you know how much performance it will take a way from detecting signal if I was to place the RD on top of the armrest?

    Damn I hate my state!

  2. #2
    Radar Fanatic
    Join Date
    Sep 2007
    Posts
    1,795

    Default Re: RD placement problem

    Mounting higher is better. On the armrest will absolutely kill your range. It will still probably pick up some, but not very well. You didn't say what kind of car you are working with. There is a hot wire there somewhere to wire it to. Someone in here has probably done it to whatever vehicle you are driving. You might be able to use the dome light, or the hot to the cigarette lighter. I have a hot wire running from the battery to under my dash to power all my gadgets.

  3. #3

    Default Re: RD placement problem

    Quote Originally Posted by fire65 View Post
    Mounting higher is better. On the armrest will absolutely kill your range. It will still probably pick up some, but not very well. You didn't say what kind of car you are working with. There is a hot wire there somewhere to wire it to. Someone in here has probably done it to whatever vehicle you are driving. You might be able to use the dome light, or the hot to the cigarette lighter. I have a hot wire running from the battery to under my dash to power all my gadgets.
    I have a 2002 MB SL500. It's a ***** to work with. Armrest sits about 8 inches below the dash level. I really don't want to gut my interior. Stitching and fittings are very tight and there is no place to hide the wire through corners and edges.

    I have a stereo amp behind my front seat. It has a 20 amp fuse and I can use that with add-circuit module but I don't know how 20 amp fuse will react with the inline 5 amp fuse that came with hardwire kit. I may be wrong about the ampage. It may be a 3amp in line fuse.

    I have a separate post for hardwire question in Beltronics forum.

    Thanks for trying to help.

  4. #4
    Yoda of Radar
    Join Date
    Jul 2008
    Location
    Dallas, Texas
    Posts
    14,448

    Default Re: RD placement problem

    The reason radar works to read your speed is because it reflects off of solid objects, and bounces back to the radar gun. That means it is going to bounce off of the entire front end of your car before it ever gets to your armrest. So yes, that would destroy your reception.

    It's probably time to just go to a stereo shop and have it professionally done, which is the common solution for MB owners.

    "Buy the BEST and screw the rest." - fire65

    "im intrested to see how well you do.i never seen a car JTG before would be a first for me.." - radarrob

  5. #5
    Power User
    Join Date
    Jul 2005
    Location
    My Home
    Posts
    3,169

    Default Re: RD placement problem

    Quote Originally Posted by riverwabbit703 View Post
    Hi Guys,

    I'm having some issue trying to find a place to mount my radar detector. Since I live in Virginia, it is illegal to own one....

    I bought the visor kit to but still will show cord hang down. I have serious issue trying to hardwire the RD. No fusebox inside the car and trying to run the hardwire up to the visor kit is a nightmare. My car is just that difficult to work with.

    Do any of you know how much performance it will take a way from detecting signal if I was to place the RD on top of the armrest?

    Damn I hate my state!
    Buy this from valentine one. They are compatible with Bel or escort with no mute switch.



    2-Port Lighter Adapter—Swivel
    Item 20319

    Same as the Adapter included with today’s V1; includes articulated bracket for mounting Concealed Display (Item 20110); electrically compatible with all V1’s. $10



    Straight Power Cord
    Item 20311

    Power cord: straight, 8-feet; $10

    It will still plug in your lighter outlet and have enough length to tuck the wires into the windshield pillar to your radar detector with the visor mount. There is no hardwiring necessary and you will see no wires hanging from the visor. Wire can still be seen running through your steering column from your lighter plug or you can opt for a longer wire by using a longer ordinary phone cord from your local wlamart, target and radio shack with the V1 2 port lighter adapter. I do this when I drive our van for long trips. No more hanging wires.

    Check this link too. [replacer_a]
    Last edited by KnightHawk; 12-24-2008 at 07:08 AM.

  6. #6
    Old Timer
    Join Date
    Nov 2006
    Location
    Cleveland/Shaker Heights, Ohio, USA
    Posts
    7,732

    Default Re: RD placement problem

    Like fire suggested, the best option would be a hot/ground setup from somewhere close to the headliner, where you've got your detector placed.

    Typically, good sources of ignition power are reading/map/dome lamps or overhead controls for the moon/sun-roof, or, alternatively, your powered inside rearview mirror.

  7. #7
    Power User
    Join Date
    May 2007
    Posts
    3,823

    Default Re: RD placement problem

    Or you can buy a Straight wire smartcord from Bel/escort and run that up the A pillar and then use a visor holder.

    Last edited by focalcivic; 12-24-2008 at 10:44 AM.

  8. #8
    Good Citizen
    Join Date
    Feb 2006
    Location
    Virginia
    Posts
    199

    Default Re: RD placement problem

    If your car has an auto dimming rear view mirror you can tap into the back of the connector for a power source. These connections are also switched so you will be turning off the RD when you shut the car off. Dome lights and the like are usually not switched so you have to remember to turn the RD on and off.

    Since these connectors are right by the rear view mirror they are excellent places to tap into.

    I have installed taps in both my Z06 Vette and an Acura RDX and have had many LEO's looking directly into the cars (especially the Vette) and they have been able to see nothing. The RD's are mounted high up on the windshield behind the top tinted area of the windshield. With this placement there is a very short wire run to the RD and it is completely invisible from the outside of the car.

 

 

Similar Threads

  1. Got GPS but one problem...
    By TRun in forum Technology General Discussion
    Replies: 13
    Last Post: 07-17-2010, 10:58 AM
  2. Little v1 problem
    By Wuaha in forum Valentine One
    Replies: 2
    Last Post: 06-16-2008, 08:02 PM
  3. Can someone help me? I have a problem.
    By rose1 in forum Radar Detectors - General
    Replies: 15
    Last Post: 02-23-2008, 09:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •