Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Professional
    Join Date
    Jan 2010
    Location
    Your imagination
    Posts
    1,153

    Default Re: In need of switchbox

    Just an update, I bought a Federal Signals SW400SS off ebay for $50


    It has seven switches kind of, 3 that can get turned on in succession with the bar thing. I haven't figured out exactly how I'm going to configure everything but I like the idea of having something like STi-R>Windshield RDs>Jammers on that flip bar. I'll probably get another smaller more hidden switch box that has each of those individually on it, one giant kill everything switch, and then power non-countermeasure electronics off the remaining four switches on the federal box.

    Turn on all countermeasures with one lever. They usually run in that level of priority to, meaning the first thing that gets killed ever is jammers, followed by windsheild RDs, followed by STi-R.
    If I ever need one thing off out of that order I'll have the hidden separate switch box. And in panic mode one button will kill it all. (except for the cam I decided that never has a reason to be off)

    soooo ummmm am I overdoing this???

    oh yeah and the cheapest smallest switchboxes I found here if anyone is interested:
    https://www.speedtechlights.com/products.php?catid=10

    Look at the dimensions on those things, the smaller ones don't have fuses though.

    Still trying to figure out the time delay issue. I know I need a time delay relay but I can't find any that are 12VDC that aren't like $100

  2. #12
    Professional
    Join Date
    Aug 2010
    Location
    Pennsylvania, USA
    Posts
    1,068

    Default Re: In need of switchbox

    That would work and it's a cool idea I guess, I only see one problem.

    Do you *always* run all of your RDs along with the jammers? Because I'm just thinking, if you ever want only your sti-r and jammers on (with the windscreen RDs off) you won't be able to do it until you install the additional stealth switches you mentioned. In order to have your jammers on every one of the detectors (on setting 2) will have to be on, too.

  3. #13
    Experienced
    Join Date
    Sep 2010
    Location
    Cold Lake, Alberta, Canada
    Posts
    306

    Default Re: In need of switchbox

    Google for a "normally closed" relay as in it is closed when the signal is off, but open when the signal is on. Wire the signal wire to the start position wire of your ignition. This way, when you're cranking your car the power to the switch box(es) is off, when the key is returned to the run position the relay will close (having lost it's signal) and the switch boxes will thus be power up. That's about the cheapest I can think of for delayed on and power surges are more likely when you're cranking the starter. If you want a bit more delay, you can wire a medium capacitor to the relay coil terminals so when the cranking of the starter is done, the capacitor will have to deminish it's charge through the relay before the relay will be able to close. No, I couldn't tell you what size capacitor to use, but they're relitively cheap. Just make sure you get a relay rated for all the accessories you're going to power through it.

  4. #14
    Professional
    Join Date
    Jan 2010
    Location
    Your imagination
    Posts
    1,153

    Default Re: In need of switchbox

    Quote Originally Posted by krypton2 View Post
    That would work and it's a cool idea I guess, I only see one problem.

    Do you *always* run all of your RDs along with the jammers? Because I'm just thinking, if you ever want only your sti-r and jammers on (with the windscreen RDs off) you won't be able to do it until you install the additional stealth switches you mentioned. In order to have your jammers on every one of the detectors (on setting 2) will have to be on, too.
    Most of the time I don't even need to run the jammers since I'm in PA for 90% of the year. But yeah I know what your saying and I just really liked the lever idea for some reason even if I have to have separate hidden switches.
    Quote Originally Posted by Sandman76 View Post
    Google for a "normally closed" relay as in it is closed when the signal is off, but open when the signal is on. Wire the signal wire to the start position wire of your ignition. This way, when you're cranking your car the power to the switch box(es) is off, when the key is returned to the run position the relay will close (having lost it's signal) and the switch boxes will thus be power up. That's about the cheapest I can think of for delayed on and power surges are more likely when you're cranking the starter. If you want a bit more delay, you can wire a medium capacitor to the relay coil terminals so when the cranking of the starter is done, the capacitor will have to deminish it's charge through the relay before the relay will be able to close. No, I couldn't tell you what size capacitor to use, but they're relitively cheap. Just make sure you get a relay rated for all the accessories you're going to power through it.
    Thanks for the idea, I'm hoping it doesn't come to that but thats what I'll do if I have to lol.

  5. #15
    Speed Demon
    Join Date
    Jul 2009
    Location
    Central TN
    Posts
    581

    Default Re: In need of switchbox

    If you can use a soldering iron, a trip to Radio Shack and $20.00 can build a timer. You'll need a 555 timer IC, some resistors and aluminum electrolytic capacitors, a IRF510 MOSFET tansistor, a circuit board and a box to put everything in.
    The 555 with the resistors and capacitors can time anything from micro-seconds to hours, triggered or started by something like the flip of a switch, or something turning on or off. Then the 555 switches the MOSFET, which in turn switches the relay.
    Look through the circuits on this website just to get an idea of what you can do with a 555, then I'll help you figure out the resistor and capacitor values and circuit layout to do what you want.
    http://home.cogeco.ca/~rpaisley4/LM555.html

  6. #16
    Lead Foot
    Join Date
    Mar 2006
    Location
    At the SPA, New York
    Posts
    477

    Default Re: In need of switchbox

    That relay I posted about probably will not work for what you want. There does not appear to be a way to delay the start up. The instructions only mention the power being shut off after a set period of time.

  7. #17
    Professional
    Join Date
    Jan 2010
    Location
    Your imagination
    Posts
    1,153

    Default Re: In need of switchbox

    Quote Originally Posted by Swamp View Post
    If you can use a soldering iron, a trip to Radio Shack and $20.00 can build a timer. You'll need a 555 timer IC, some resistors and aluminum electrolytic capacitors, a IRF510 MOSFET tansistor, a circuit board and a box to put everything in.
    The 555 with the resistors and capacitors can time anything from micro-seconds to hours, triggered or started by something like the flip of a switch, or something turning on or off. Then the 555 switches the MOSFET, which in turn switches the relay.
    Look through the circuits on this website just to get an idea of what you can do with a 555, then I'll help you figure out the resistor and capacitor values and circuit layout to do what you want.
    http://home.cogeco.ca/~rpaisley4/LM555.html
    Thanks for the offer but I think I'm going to go with something prebuilt. I've found what I need in a circuit that costs around $30 and it has tons of other **** it can do if I ever need it later. (can't remember the name atm) I am usually a fan of DIY and I've wanted to get into the the circuit board stuff for a while now but unfortunately I don't have the time at this point in my life to pick up another hobby lol

    Quote Originally Posted by samq45 View Post
    That relay I posted about probably will not work for what you want. There does not appear to be a way to delay the start up. The instructions only mention the power being shut off after a set period of time.
    I actually figured out how to do it with your circuit, can't remember how I did though. I found a post about how someone used one to delay his HIDs coming on and reworked his wiring.

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •