L.I. Install on 2008 Evo X

[PshoootR]

[Stealth Stalker]

You're gonna get seriously pwnt.

Way too low, and upside down.

[Nick]

Yeah I thought it was too low too. Your going to have to cut into that pretty mesh on the top! Gotta do what ya gotta do! =)

[aa2033]

You're gonna get seriously pwnt.

Way too low, and upside down.

lmao

i don't even think he has to cut into the mesh at the top, there's a ledge on the upper grill, but it's recessed. so he might have trouble with that.

[focalcivic]

You're gonna get seriously pwnt.

Way too low, and upside down.

I disagree, flip the heads with the bubbles out and test them, they might work since they are LI's, if not move them the upper bumper cut outs, you should be able to place them in there with out cutting too.

[snoopyc4]

You're gonna get seriously pwnt.

Way too low, and upside down.

Blunt but true. Low mounted heads do bad in ambush speed traps (500 ft or less). Bubbles need to be out as well.

[Stealth Stalker]

Yeah, two thirds of that car will appear over a rise before the heads do, which is certain pwn4g3. Same thing applies to coming down an incline, or being shot from an overpass.

Bubbles out, in the lower, outer edges of the upper grille is going to be your best bet.

[th3 factory freak]

You're gonna get seriously pwnt.

Way too low, and upside down.

I disagree, flip the heads with the bubbles out and test them, they might work since they are LI's, if not move them the upper bumper cut outs, you should be able to place them in there with out cutting too.

I agree, my setup is similar and it works great, just flip the bubbles.

[PshoootR]

I really do appreciate all the feedback. I'll go ahead and flip the transponders to put the "bubbles" (receivers) facing out for now.

Thanx a bunch, all. Further advice always welcome! This is my first experience with a jammer.

[8freerunner8]

Sweet car, if it makes you feel any better.