Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Experienced
    Join Date
    May 2009
    Location
    Edmonton, AB Canada
    Posts
    251

    Default LI Dual Install on BMW 330i with Photos

    Finally got the install completed at a local Future Shop. The employee had previously installed a starter/alarm combo for me on a different vehicle that no one else could do apparently (Viper system on push to start), so I trusted him with this. Looks pretty good to me.

    Have tested by beaming a contact from a windows mobile device, however guns are scarce around here and haven't had the chance to find someone with access to one...Sure wish I could!

    Kill switch was mounted on the left hand side of the driver seat. I find it very easily accessible, which will make kills inconspicuous. Can't wait until I get my first hit!







    Last edited by brettzo; 04-05-2010 at 06:12 PM.

  2. #2
    Power User
    Join Date
    May 2007
    Posts
    3,823

    Default Re: LI Dual Install on BMW 330i with Photos

    interesting place to put the kill switch, I might of gone the ash tray route at least or near the arm rest.

  3. #3
    Lead Foot
    Join Date
    May 2009
    Location
    Houston, Texas, United States
    Posts
    436

    Default Re: LI Dual Install on BMW 330i with Photos

    looks good. and very diff on location for kill switch only thing that i would be worried about is making sure there is some extra wire and it is well secured to seat so when seat moves forward back or tilt that noting rubs with the wire but other then that looks good

  4. #4
    Speed Demon
    Join Date
    Mar 2009
    Location
    State of Awareness
    Posts
    718

    Default Re: LI Dual Install on BMW 330i with Photos

    Very nice! I actually like the placement of the kill switch
    I know the LIs are stronger than the Blinders that I have, but I hope that the low location does not hurt you.

    At the recent MlOAC, a completely blacked out M3 had same location and great results with the exception of one very large PT.

  5. #5
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: LI Dual Install on BMW 330i with Photos

    Quote Originally Posted by jmccam View Post
    Very nice! I actually like the placement of the kill switch
    I know the LIs are stronger than the Blinders that I have, but I hope that the low location does not hurt you.

    At the recent MlOAC, a completely blacked out M3 had same location and great results with the exception of one very large PT.
    Large PT's on the MOAC are the norm, not the exception. If you only have 1 then you have a pretty solid system. If you have 0 then you have LI HP's!
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  6. #6
    Speed Demon
    Join Date
    Mar 2009
    Location
    State of Awareness
    Posts
    718

    Default Re: LI Dual Install on BMW 330i with Photos

    Quote Originally Posted by category4 View Post
    Quote Originally Posted by jmccam View Post
    Very nice! I actually like the placement of the kill switch
    I know the LIs are stronger than the Blinders that I have, but I hope that the low location does not hurt you.

    At the recent MlOAC, a completely blacked out M3 had same location and great results with the exception of one very large PT.
    Large PT's on the MOAC are the norm, not the exception. If you only have 1 then you have a pretty solid system. If you have 0 then you have LI HP's!
    Not arguing that point, just noting that I was surprised that the black M3 had a PT at over 1000ft at MOAC.

  7. #7
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: LI Dual Install on BMW 330i with Photos

    Quote Originally Posted by jmccam View Post
    Quote Originally Posted by category4 View Post
    Quote Originally Posted by jmccam View Post
    Very nice! I actually like the placement of the kill switch
    I know the LIs are stronger than the Blinders that I have, but I hope that the low location does not hurt you.

    At the recent MlOAC, a completely blacked out M3 had same location and great results with the exception of one very large PT.
    Large PT's on the MOAC are the norm, not the exception. If you only have 1 then you have a pretty solid system. If you have 0 then you have LI HP's!
    Not arguing that point, just noting that I was surprised that the black M3 had a PT at over 1000ft at MOAC.
    I'm betting it was the LRB too!
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  8. #8
    Speed Demon
    Join Date
    Mar 2009
    Location
    State of Awareness
    Posts
    718

    Default Re: LI Dual Install on BMW 330i with Photos

    Quote Originally Posted by category4 View Post
    Quote Originally Posted by jmccam View Post
    Quote Originally Posted by category4 View Post
    Quote Originally Posted by jmccam View Post
    Very nice! I actually like the placement of the kill switch
    I know the LIs are stronger than the Blinders that I have, but I hope that the low location does not hurt you.

    At the recent MlOAC, a completely blacked out M3 had same location and great results with the exception of one very large PT.
    Large PT's on the MOAC are the norm, not the exception. If you only have 1 then you have a pretty solid system. If you have 0 then you have LI HP's!
    Not arguing that point, just noting that I was surprised that the black M3 had a PT at over 1000ft at MOAC.
    I'm betting it was the LRB too!
    Give that man cigar!

    It was the LRB at 1122ft on the CM.

    I am not sure that I did not affect his jamming performance, though, because until we realized it, I had my jammers on as I was returning up the hill as he was coming down and I could have been affecting his LIs. We realized this and we all started killing our jammers on the return trip.

    Either way, I think LIs on this car are very strong! Only way I can get that level of performance is running all four of my Blinders up front!

  9. #9
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: LI Dual Install on BMW 330i with Photos

    I would take that BMW license plate target off the front though.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  10. #10
    Experienced
    Join Date
    May 2009
    Location
    Edmonton, AB Canada
    Posts
    251

    Default Re: LI Dual Install on BMW 330i with Photos

    Quote Originally Posted by grasshopper View Post
    looks good. and very diff on location for kill switch only thing that i would be worried about is making sure there is some extra wire and it is well secured to seat so when seat moves forward back or tilt that noting rubs with the wire but other then that looks good
    I actually like the positioning of the kill switch. As I said it's very easily accessible and honestly feels like it's where it's meant to be, as when I reach down it's the first button that touches my finger. We'll see how smoothly it goes when the adrenaline's going after a hit.

    Quote Originally Posted by jmccam View Post
    Quote Originally Posted by category4 View Post
    Quote Originally Posted by jmccam View Post
    Quote Originally Posted by category4 View Post
    Quote Originally Posted by jmccam View Post
    Very nice! I actually like the placement of the kill switch
    I know the LIs are stronger than the Blinders that I have, but I hope that the low location does not hurt you.

    At the recent MlOAC, a completely blacked out M3 had same location and great results with the exception of one very large PT.
    Large PT's on the MOAC are the norm, not the exception. If you only have 1 then you have a pretty solid system. If you have 0 then you have LI HP's!
    Not arguing that point, just noting that I was surprised that the black M3 had a PT at over 1000ft at MOAC.
    I'm betting it was the LRB too!
    Give that man cigar!

    It was the LRB at 1122ft on the CM.

    I am not sure that I did not affect his jamming performance, though, because until we realized it, I had my jammers on as I was returning up the hill as he was coming down and I could have been affecting his LIs. We realized this and we all started killing our jammers on the return trip.

    Either way, I think LIs on this car are very strong! Only way I can get that level of performance is running all four of my Blinders up front!
    Please do elaborate on this. What gun was used and was it only the one PT?

 

 

Similar Threads

  1. My LI Dual install
    By hiddencam in forum Laser Interceptor
    Replies: 14
    Last Post: 12-19-2010, 07:35 AM
  2. Escort Passport 9500ci Install (Photos) - BMW M5
    By superlubricity in forum Show off your install.
    Replies: 50
    Last Post: 10-29-2009, 01:56 PM
  3. dual ZR3 install.
    By partsfreak in forum Laser ShifterPro, ZR4, ZR3
    Replies: 28
    Last Post: 04-16-2009, 03:15 PM
  4. Dual LPP install on S-10
    By againstme! in forum Show off your install.
    Replies: 10
    Last Post: 12-09-2008, 01:23 PM
  5. PHOTOS ADDED: custom install of a remote display
    By bushpilot in forum Valentine One
    Replies: 31
    Last Post: 03-31-2008, 11:55 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •