Results 1 to 5 of 5
  1. #1
    Newcomer
    Join Date
    Oct 2007
    Location
    SE Pennsylvania
    Posts
    2

    Default Are bike vibrations causing my Passport problems?

    Hi guys, new here to this board. Found it after I started having issues with my Passport 8500 which started after I was using it on my bike for about 2 months.
    I have a BMW F650GS, decided tomount my 8500 on it with Visual alert. Initially worked great but after a while does not pick any bands up except sporadically Ka, ride by stationary radars displaying your speed, nothing registers, unit goes into Self Cal mode constantly.
    Do you think it has to do with bike vibration that caused the problem, after all 650 is a thumper. When it rains, I take it off the bike since it is not waterproof. Here is a pic of the setup. Has anyone else experienced that on a bike???Any ideas are appreciated. Called Escort yesterday. It is going for a tune-up today.

  2. #2
    Advanced Member
    Join Date
    Mar 2005
    Location
    Police State of Ontario
    Posts
    1,967

    Default

    Admittedly the environment on a bike is harsher than a cage. I've wondered about a shock absorbing mount as well and use industrial strength velcro to hold my Sti in place. Hoping that it "floats" on the platform.

    I dont think I've read in this forum any trend towards a problem

  3. #3

    Default Re: Are bike vibrations causing my Passport problems?

    Quote Originally Posted by statking
    Hi guys, new here to this board. Found it after I started having issues with my Passport 8500 which started after I was using it on my bike for about 2 months.
    I have a BMW F650GS, decided tomount my 8500 on it with Visual alert. Initially worked great but after a while does not pick any bands up except sporadically Ka, ride by stationary radars displaying your speed, nothing registers, unit goes into Self Cal mode constantly.
    Do you think it has to do with bike vibration that caused the problem, after all 650 is a thumper. When it rains, I take it off the bike since it is not waterproof. Here is a pic of the setup. Has anyone else experienced that on a bike???Any ideas are appreciated. Called Escort yesterday. It is going for a tune-up today.
    Nice setup! You want your RD pointing more straight ahead though. Likely the bike vibrations have loosened the internal horn-to-board screws. Fortunately its easy to open up the 8500 to tighten these screws up since there is no screw under the serial number sticker. I think that the corner of the case where the serial number is snaps together. Simply remove the case screws and then lift off the bottom case cover while tilting the case cover towards the sticker corner in order to unhook the snap. Then simply tighten up the internal screws and put the bottom cover back on. Be sure to reset 8500 by holding down the appropriate buttons during the first power-up once you are done.

    Since your 8500 experiences a lot of vibration on the bike, I estimate a 75% chance of success that tightening the internal screws will solve the problem. If it does and your X50 works fine for a week with no self calibration errors, then open it up again, take each screw out one at a time and put a dab of contact cement on it, and reinstall the screw. This will prevent the screws from coming loose in the future.

  4. #4
    Cheetah Rep
    Join Date
    Feb 2005
    Location
    Phoenix, Arizona
    Posts
    2,567

    Default

    yeah, spankyaf called it, bikes take a beating vibration wise.
    hopefully MEM-TEK's suggestion will work. good to know.
    i've had an X50 on the bike for about a year with no problems, but that doesn't mean the vibration didn't do it to yours, it's definitely possible.

    here's an option for you as well:
    http://www.radarbusters.com/motorcyc...ectorcover.cfm

    it's a clear waterproof cover.
    it works great, plus going along with what spankyaf said, it'll add a second layer of velcro for possible added cushioning.

    here's a pic with my X50.
    i painted my cover black, to blend in more.








    i don't usually ride when it rains or but i have been caught in rainstorms before while out, and it has worked great, not a drop of water.
    if you ride a lot in the rain, you could add some silicone to the cord hole underneath to completely seal it.

  5. #5
    Newcomer
    Join Date
    Oct 2007
    Location
    SE Pennsylvania
    Posts
    2

    Default

    Thanks Guys;
    as far as pointing the unit straighter, it actually is. That pic was taken after I washed the bike and was putting things back on. It points straight ahead.
    I had the unit apart, tried different tricks, nothing really helped. For vibrations I even placed some foam between the bottom of the case and the board, same on top to keep the main board from vibrating inside. Do not know if hat did any good or not. Had the unit working in my cage for 3 years with no problems, a few weeks on the bike and it acts up. I sent it back to Escort for $79 tune-up this afternoon. They claim they can solve the problem. We'll see. I'll post when I get it back.

    Thanks for your feedback.
    Andrew

 

 

Similar Threads

  1. S1? What is causing this to go off?
    By blpage21 in forum Introduce Yourself
    Replies: 3
    Last Post: 10-05-2009, 07:30 AM
  2. Can V1 take vibrations?
    By slr_noob in forum Valentine One
    Replies: 4
    Last Post: 01-11-2009, 09:48 AM
  3. V1 and vibrations
    By Ex0dus36 in forum Valentine One
    Replies: 12
    Last Post: 11-22-2008, 12:59 AM
  4. Replies: 4
    Last Post: 02-23-2006, 08:46 AM
  5. photo radar causing problems
    By mark1 in forum Photo Enforcement
    Replies: 0
    Last Post: 10-09-2005, 10:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •