Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default ZR4's on a C6 Corvette

    I finally got to test the LI and ZR4 installation on the Vette tonight. I was very surprised at how well the ZR4's did against my PL III. The LI's were obviously JTFG but the ZR4's were JTG also. I did get some rear punchthroughs when targeting the tail lights, but JFG when only targeting the plate.

    Granted it was only one gun and an easy gun to jam, but this might be the most popular gun in GA.

    Again very pleased with the results, I thought for sure I would get PT's on the headlights but did not. The ZR4's will make a very adequate backup should I have problems with the LI.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  2. #2
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: ZR4's on a C6 Corvette

    Quote Originally Posted by category4 View Post
    I finally got to test the LI and ZR4 installation on the Vette tonight. I was very surprised at how well the ZR4's did against my PL III. The LI's were obviously JTFG but the ZR4's were JTG also. I did get some rear punchthroughs when targeting the tail lights, but JFG when only targeting the plate.

    Granted it was only one gun and an easy gun to jam, but this might be the most popular gun in GA.

    Again very pleased with the results, I thought for sure I would get PT's on the headlights but did not. The ZR4's will make a very adequate backup should I have problems with the LI.
    I predict that the Ultralyte sill be a very different story, especially on the back. But yeah, against a PLIII, the ZR4s perform quite well on a small to medium sized car.

  3. #3
    Experienced
    Join Date
    Oct 2008
    Location
    Oregon
    Posts
    320

    Default Re: ZR4's on a C6 Corvette

    What gun are you bringing with you DJ? The more I see posts like this, the happier I am about going with the ZR4.

  4. #4
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: ZR4's on a C6 Corvette

    Quote Originally Posted by The Breeze View Post
    What gun are you bringing with you DJ? The more I see posts like this, the happier I am about going with the ZR4.
    Kustom PLII.

  5. #5
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: ZR4's on a C6 Corvette

    Quote Originally Posted by djrams80 View Post
    I predict that the Ultralyte sill be a very different story, especially on the back. But yeah, against a PLIII, the ZR4s perform quite well on a small to medium sized car.
    Yes my next lidar gun aquisition will be the ultralyte 20-20 or the truspeed. We see quite a few of the Ultralyte's in GA so I am sure we will begin to see the truspeeds also.

    The stalker is the gun I really fear, thank goodness we don't see many of those.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  6. #6
    Old Timer
    Join Date
    Nov 2006
    Location
    Cleveland/Shaker Heights, Ohio, USA
    Posts
    7,732

    Default Re: ZR4's on a C6 Corvette

    Good stuff, category4.

  7. #7
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: ZR4's on a C6 Corvette

    Quote Originally Posted by TSi+WRX View Post
    Good stuff, category4.
    I'm going to try and get some of the videos posted over the next few days. I filmed them at night in nightshot mode so you can see the jammers firing. Hopefully they turned out, I have not reviewed them yet.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  8. #8
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: ZR4's on a C6 Corvette

    Checked my setup again today after I replaced the LI's to make sure everthing was setup properly. Again LI's are JTFG on the PL3. I was however getting PT's on the ZR4's on the headlights. The only difference was today I tested during daylight. Could it be that headlights on help confuse the gun when targeting the headlight area?
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  9. #9
    Old Timer
    Join Date
    Nov 2006
    Location
    Cleveland/Shaker Heights, Ohio, USA
    Posts
    7,732

    Default Re: ZR4's on a C6 Corvette

    Certainly possible.

    We know that even low-powered, conventional incandescent-halogen, DRLs (i.e. that of the current-generation Honda Accord) does funny things to error/jam-detection on the Laser Atlanta.....

    I certainly wouldn't discount the possibility, outright.

  10. #10
    Speedtrap Crasher
    Join Date
    Aug 2006
    Location
    Houston, TX
    Posts
    6,732

    Default Re: ZR4's on a C6 Corvette

    Quote Originally Posted by category4 View Post
    Checked my setup again today after I replaced the LI's to make sure everthing was setup properly. Again LI's are JTFG on the PL3. I was however getting PT's on the ZR4's on the headlights. The only difference was today I tested during daylight. Could it be that headlights on help confuse the gun when targeting the headlight area?
    The C6 got PTs on the headlights? Distance? We couldn't get that on mine unless distances were 300 ft or less. Of course we were not exactly the best shots.
    Project "BONES" Speed Lab:
    Valentine One, Blinder M47 "All Front Configuration"
    Pro97 Police Scanner
    1 Saves / 3 Strikes as of 8/22/2009
    Estimated saves in U.S. Dollars: $200

 

 

Similar Threads

  1. Improve ZR4's?
    By hoffy97 in forum Laser Jammers - General
    Replies: 5
    Last Post: 12-19-2010, 06:49 PM
  2. ZR4's Weak No More!
    By category4 in forum Laser ShifterPro, ZR4, ZR3
    Replies: 69
    Last Post: 05-23-2009, 02:25 AM
  3. 9500CI with no ZR4's
    By CJR238 in forum Escort
    Replies: 12
    Last Post: 11-13-2008, 10:13 AM
  4. 2 ZR4'S?
    By CJR238 in forum Laser ShifterPro, ZR4, ZR3
    Replies: 5
    Last Post: 05-22-2008, 08:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •