Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Good Citizen
    Join Date
    May 2007
    Location
    DFW
    Posts
    127

    Default Slim vs Regular LI heads

    Is there any performance difference between the slim and regular sized heads?
    If not, would it be possible to just get 4 slim heads in a quad order?

  2. #2
    Power User
    Join Date
    Nov 2007
    Location
    Htown
    Posts
    3,253

    Default Re: Slim vs Regular LI heads

    Quote Originally Posted by WaltBurkett View Post
    Is there any performance difference between the slim and regular sized heads?
    If not, would it be possible to just get 4 slim heads in a quad order?
    Slims are for the Rear... PM or email Cliff.

  3. #3
    Yoda of Radar
    Join Date
    Jul 2008
    Location
    Dallas, Texas
    Posts
    14,448

    Default Re: Slim vs Regular LI heads

    Slim refers to their front-to-back depth. They are made a tad bit slimmer so that they will fit in shallow licence plate hollows. The sensor optics are also made to have a wider field of view, however the diode optics and output are the same, I believe.

    "Buy the BEST and screw the rest." - fire65

    "im intrested to see how well you do.i never seen a car JTG before would be a first for me.." - radarrob

  4. #4

    Default Re: Slim vs Regular LI heads

    Quote Originally Posted by WaltBurkett View Post
    Is there any performance difference between the slim and regular sized heads?
    If not, would it be possible to just get 4 slim heads in a quad order?
    As StealthStalker indicated, the Regular Front and Rear Slim Sensor's dimensions are exactly the same in height and width and differ only in their depth front to back. This is to better facilitate installations under say the trunk lip of most vehicles. As the Slim Sensors have special optics designed to better address the characteristics of LIDAR Enforcement from the rear, the Regular Sensors should only be mounted up front and the Slim Sensors in the back of your install vehicle as the Regular Sensors perform better up front and the Slim Sensors perform better in the rear.

    Yes, if after this explanation you would like an LI QUAD consisting of all Slim Sensors, it can indeed be configured this way.

    Cliff - LI-USA

  5. #5
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default Re: Slim vs Regular LI heads

    Picture of the different size of the heads in depth

    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

  6. #6
    Good Citizen
    Join Date
    May 2007
    Location
    DFW
    Posts
    127

    Default Re: Slim vs Regular LI heads

    Thanks for the responses but I guess I should have been clearer in my questions.
    I know and understand the differences in actual size of each sensor. What I am looking for is if anyone has actually done testing in the performance differences between the two sized heads when mounted in the front as well as the back? Why should the slim sensors only be used in the rear? If they are designed to be effective for straight on rear shots out to laser effective range yet also offer extended off bore sight capability, angle off the tail, would they not actually be better in the front also? Or are you saying that since they offer wide angle rear capability they could be overpowered, i.e.: burn through at close low aspect ranges when employed in the front.
    Instead of me guessing, Cliff, what exactly do you lose when using slim sensors in the front? Specifically?
    When saying the slim heads have special optics are you saying they have a different head cover or diffuser that gives them a larger angle of coverage or view age?
    Here in the DFW area many shots are taken from overpasses, both head on as well as going away.

    Thanks for clarifying,
    Walt

  7. #7

    Default Re: Slim vs Regular LI heads

    Quote Originally Posted by WaltBurkett View Post
    Instead of me guessing, Cliff, what exactly do you lose when using slim sensors in the front? Specifically?
    When saying the slim heads have special optics are you saying they have a different head cover or diffuser that gives them a larger angle of coverage or view age?
    Here in the DFW area many shots are taken from overpasses, both head on as well as going away.

    Walt
    Simply, LIDAR Enforcement from the front is not a High-Axis as LIDAR Enforcement from the rear as you are shot from a great distance upon initial painting. You have plenty of warning with the ahead scenario and little to none with the rear scenario. The slim sensors can detect (see) better in the rear scenario than the regular sensors can. The specific technology is proprietery and what gives LI it's performance advantage!

    Cliff - LI-USA

  8. #8
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,713

    Default Re: Slim vs Regular LI heads

    Quote Originally Posted by Laser-InterceptorUSA View Post
    Simply, LIDAR Enforcement from the front is not a High-Axis as LIDAR Enforcement from the rear as you are shot from a great distance upon initial painting. You have plenty of warning with the ahead scenario and little to none with the rear scenario. The slim sensors can detect (see) better in the rear scenario than the regular sensors can. The specific technology is proprietery and what gives LI it's performance advantage!

    Cliff - LI-USA
    Must work pretty well too. We were doing some testing last night with the shooter 25' above the road and no PT's on rear but at about 50' could get PT's on front.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  9. #9
    Power User
    Join Date
    Nov 2007
    Location
    Htown
    Posts
    3,253

    Default Re: Slim vs Regular LI heads

    I wonder what results could be obtained from using the Slim heads up front.

  10. #10
    Good Citizen
    Join Date
    May 2007
    Location
    DFW
    Posts
    127

    Default Re: Slim vs Regular LI heads

    Cliff,
    <<< Simply, LIDAR Enforcement from the front is not a High-Axis as LIDAR Enforcement from the rear as you are shot from a great distance upon initial painting.>>>

    Not necessarily so. Many shots are taken low aspect in the front as well as rear. Some shots in the front are high aspect as I mentioned the frontal shot via overpass min range. I saw the other day an LEO on the sidewalk at the corner of an intersection with his motorcycle well into the grass shooting both forward and rear shots at all angles and distances. (Although I will admit that type of encounter is probably pretty rare.)


    <<< The slim sensors can detect (see) better in the rear scenario than the regular sensors can.>>>
    Meaning they have better high angle detection? Also better high angle jamming capability?

    <<< The specific technology is proprietery and what gives LI it's performance advantage!>>>
    Believe me when I say you have no worries about divulging secret information about the LI. Anyone in the business of electronics could easily re-engineer one if desired to see what components are installed and how exactly they work. I am simply trying to understand what is the real difference in performance between the two types of heads to determine what combination I should get and how to deploy them. (i.e. 2 slim heads on the outside front and one regular head in the middle front. One slim head in the rear.)
    One last question:
    Are you saying that the slim head does not have the longer, low aspect jamming capability that the bigger head has?

    Again, the reason for this thread was also to see if anyone had actually tested slim heads up front.If not, maybe its worth a test?


    Walt

 

 

Similar Threads

  1. Mixing HP heads with regular heads on same CPU?
    By TuonoR in forum Laser Interceptor
    Replies: 15
    Last Post: 08-17-2010, 02:45 PM
  2. Slim or regular LI?
    By Solidjake in forum Laser Interceptor
    Replies: 9
    Last Post: 04-23-2010, 01:20 PM
  3. LI slim heads vs normal
    By The Chariot in forum Laser Interceptor
    Replies: 30
    Last Post: 03-31-2010, 05:28 PM
  4. LI slim vs. regular
    By ahmadr in forum Laser Interceptor
    Replies: 0
    Last Post: 03-07-2008, 10:04 AM
  5. LI slim heads VS. regular size heads
    By denaliman in forum Laser Interceptor
    Replies: 2
    Last Post: 11-13-2007, 03:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •