Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Newcomer
    Join Date
    May 2006
    Location
    Glen Rock
    Posts
    72

    Default VALENTINE 1 - Which Version / Firmware?

    VALENTINE 1 - I'm reaching out to all you Valentine experts...
    In reading all the posts, there are some obvious problems with the V1 Detectors indicating the "J - Junk" signal and "The Ghosting".

    Which Version - 1.7 or 1.8, did these issues start with? Which Firmware update did it start with?

    A friend has the first 1.8 Version, without POP and he says he had no problems. Is he just lucky, or should he be experiencing it as well?

    Thanks

  2. #2
    Radar Fanatic
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    2,816

    Default

    If it is a non-POP version, it will be impossible to have "J" issues on real alerts. If POP is not used where you drive, you should probably not get the POP ugrade. I have never had a real alert "J" out, but several others have. Firmware version 3.824 or 3.825 are the first V1s with POP2 capability.

    GTO_04

  3. #3
    Radar Fanatic
    Join Date
    Jan 2005
    Location
    East Bay Ca
    Posts
    1,799

    Default

    Started around 11/04 firmware 3.818 first 1.8 POP2 version.
    Seems that some people have not had a junk alert problem either some units are better or the users don't drive much?
    There were some versions before 3.818 with an (I) code in the reprogramming that could have been an attempt at POP but I think that they are OK, PM Brick he had one.

    GTO_04, it is not possible to have a "J" alert on a non POP as the "J"unk alert started with the POP version.

  4. #4
    Radar Fanatic
    Join Date
    Mar 2005
    Location
    Staffordshire, Uk
    Posts
    2,000

    Default

    when i'm next to the uk gatso i can get a ghost k band and thats firmware

    3.769 but when close to a radar sorce ghosting can appear, this can be classed as normal operation.

  5. #5
    Newcomer
    Join Date
    May 2006
    Location
    Glen Rock
    Posts
    72

    Default

    In my consideration to purchase a VALENTINE DETECTOR, would you recommend buying the Version 1.7 or Version 1.8 (pre / no POP)? Which of these Versions are more stable (less Quality issues).

    Is either the 1.7 or 1.8 better at Filtering False Signals?

    Thanks

  6. #6
    Radar Fanatic
    Join Date
    Mar 2005
    Location
    Staffordshire, Uk
    Posts
    2,000

    Default

    from a technical point the 1.8 because its newer and will have better software not to mension the awesome laser detection..

  7. #7
    Radar Fanatic
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    2,816

    Default

    Quote Originally Posted by V1 Dave
    Started around 11/04 firmware 3.818 first 1.8 POP2 version.
    Seems that some people have not had a junk alert problem either some units are better or the users don't drive much?
    There were some versions before 3.818 with an (I) code in the reprogramming that could have been an attempt at POP but I think that they are OK, PM Brick he had one.

    GTO_04, it is not possible to have a "J" alert on a non POP as the "J"unk alert started with the POP version.
    I agree. That's what I was getting at, sort of in a roundabout way.

    Maybe the incidence of "J" outs of real radar coincides with the presence of junk RDs. I just don't get many "J" alerts period where I drive. I get more falses on my BEL 985 than my V1. But I do not view the number of false alerts as a problem for the newer BELs.

    GTO_04

  8. #8
    Newcomer
    Join Date
    May 2006
    Location
    Glen Rock
    Posts
    72

    Default

    Serial Number - Besides which Version, does the Serial Number tell you anything else? (ex date of build, firmware etc...)

  9. #9
    Radar Fanatic
    Join Date
    Mar 2005
    Location
    Staffordshire, Uk
    Posts
    2,000

    Default

    end of serial number..........year of manufacture.......... v1 number
    399 ......................................1992 - 1996 ------------------1.7
    400 - 439...............................1997 - 1998------------------ 1.7
    440 - 599...............................1998 - 2001 ------------------1.7
    600 and above........................2001 - 2005 ------------------1.8

    hope this helps..

  10. #10
    Newcomer
    Join Date
    May 2006
    Location
    Glen Rock
    Posts
    72

    Default

    Quote Originally Posted by laserblaster
    end of serial number..........year of manufacture.......... v1 number
    399 ......................................1992 - 1996 ------------------1.7
    400 - 439...............................1997 - 1998------------------ 1.7
    440 - 599...............................1998 - 2001 ------------------1.7
    600 and above........................2001 - 2005 ------------------1.8

    hope this helps..
    Perfect! Thank you very much !!!

 

 

Similar Threads

  1. New version LI software and firmware?
    By Varactor in forum Laser Interceptor
    Replies: 3
    Last Post: 10-12-2011, 10:17 AM
  2. how many firmware version for the vector 995 ?
    By SwIs_AxE in forum Beltronics
    Replies: 1
    Last Post: 10-23-2006, 06:24 AM
  3. Firmware Version
    By rockywoods in forum Beltronics
    Replies: 4
    Last Post: 08-14-2006, 05:47 PM
  4. Firmware Version?
    By radarTom in forum Valentine One
    Replies: 1
    Last Post: 05-25-2006, 03:31 PM
  5. Firmware Version
    By hookem202 in forum Valentine One
    Replies: 1
    Last Post: 01-12-2006, 03:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •