Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Remote Display?

  1. #1
    Speed Demon
    Join Date
    Apr 2006
    Posts
    567

    Default Remote Display?

    how exactly does the remote display work. does it work in conjunction with the main units display. in other words - do they both stay on at the same time. can you disable the main unit and just use the remote? can you disable the remote unit and just use the main unit. ill be adding the remote here shortly and am a little confused as to how it works. i understand how to hook it up just not how it functions.

  2. #2
    Professional
    Join Date
    Jun 2006
    Location
    Southern California
    Posts
    1,160

    Default

    BullyDawg19,

    The remote (concealed) display works like this. If you have the remote display connected along with your main (V1) unit the main goes dark and only the remote will display the alerts. The purpose is to "conceal" your main unit from other drivers seeing the alerts too. You want them to be the "rabbit" or the car that passes you out like a fool and ends up with the ticket triggering an alert that the V1 can pick (Mostly if LEO's use Instant ON)

    Ace

  3. #3
    Experienced
    Join Date
    Oct 2005
    Location
    East of Rochester, NY
    Posts
    276

    Default

    The only time the main unit lights up is at power up along with the remote. Then the remote only gives you the visual alerts after that. But the sound comes from the main unit along with the volume adjustment. Unless you have the audio remote.

  4. #4
    Speed Demon
    Join Date
    Apr 2006
    Posts
    567

    Default

    so what you are saying is - if the remote is hooked up then the main display is off. is this always the case or is there a way to swap back and forth without the hassle of unplugging the remote. i had thoughts of mounting the remote permanently in the dash but dont necessarily want to use it all the time. maybe just at night or when i want to be more discreet. i guess i just want to know if i can disable the remote while it is hooked up without going through the hassle of unplugging it.

  5. #5
    Newcomer
    Join Date
    May 2006
    Location
    Manhattan, KS
    Posts
    39

    Default

    If you purchase both the Audio Adapter and the Concealed Display, you can wire/hook it up in a way that the On/Off switch on the Audio Adapter will control the power going to the Concealed Display. Therefore if you turn the switch on the Audio Adapter to off it'll black out the Concealed Display and run the Visual Alerts back to the main unit.

    Here's the visual version of what I just tried to describe



    Hope this helps,
    Aaron

  6. #6
    Speed Demon
    Join Date
    Apr 2006
    Posts
    567

    Default

    thanks KSU -i figured that out right before you posted. sometimes i guess its best to read the whole manual before beginning. i thought #4 was what i was looking for - i am certain now that you have confirmed. thanks again.

  7. #7
    Newcomer
    Join Date
    May 2006
    Location
    Manhattan, KS
    Posts
    39

    Default

    Quote Originally Posted by BullyDawg19
    thanks KSU -i figured that out right before you posted. sometimes i guess its best to read the whole manual before beginning. i thought #4 was what i was looking for - i am certain now that you have confirmed. thanks again.
    Hey BullyDawg,

    No problem, I remember posting a while back with a different option on how the Remote Audio Adapter could be used to control power to the main unit. Just with all the options you get on wiring if you purchase the Audio Adapter in addition to the Concealed Display, makes it seem worth the extra money, especially in a hardwire situation.

    Aaron

  8. #8
    Newcomer
    Join Date
    Jun 2006
    Location
    PTC, Georgia
    Posts
    54

    Default

    If you can, get a concealed display modification from lifespeed. The display lights are replaced with color LEDs which make it easier to identify the different signals during night and low light conditions.

    I managed to install mine in about 10 min.

    The best part of the concealed display is you have no hanger on's using your detector.

    I wuv dem wascalwee wabbits.

  9. #9
    Speed Demon
    Join Date
    Apr 2006
    Posts
    567

    Default

    i just sent clay the money.
    i was wandering about something with the remote. if i installed an on/off switch on the power lead in between the direct wire hookup and the remote i could effectively elimante the need for the remote audio adapter. when i want to use the remote display i could just reach down and flip the switch - powering up the remote display and shutting down the main units display. i dont know if it would work - what do you guys think? i would have the main unit plugged into the direct wire hookup and the swith between the direct wire hookup and the remote display.

  10. #10
    Newcomer
    Join Date
    Apr 2006
    Location
    Herndon, VA
    Posts
    36

    Default

    Seriously, the remote audio adapter is worth the money if you need something to kill the whole system. It made my install 10x easier than trying to figure out how to add a kill switch. The reason being is my V1 is in the rear of my car, the display is next to my tach, out of reach.

    HTH

 

 

Similar Threads

  1. Where to put remote display?
    By clinterific in forum Valentine One
    Replies: 3
    Last Post: 11-22-2010, 05:40 PM
  2. V1 remote display.
    By CJR238 in forum Valentine One
    Replies: 28
    Last Post: 03-19-2010, 12:17 PM
  3. Remote display for the STI
    By vliou2173 in forum Beltronics
    Replies: 6
    Last Post: 08-23-2007, 08:09 AM
  4. Remote Display
    By tonyspin in forum Valentine One
    Replies: 5
    Last Post: 05-21-2007, 05:27 PM
  5. Replies: 4
    Last Post: 05-24-2006, 12:59 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •