Does it detect as well in A setting for highway driving instead of programming the V1?
Does it detect as well in A setting for highway driving instead of programming the V1?
huh?Originally Posted by sosail
A = All Bogeys = Highway mode
Small L and Big L are both the same sensetivity and they are city modes. Big L shows nothing until threshold is met. Small L shows the alert, but doesn't unmute until threshold is met. I prefer small L with custom automute settings as shown in the sticky above.
A is the most sensitive mode for the V1. You can program it to be somewhat more sensitive by turning off POP, but that is about the only thing that will somewhat increase your range. There is a Ka sensitivity option, but that only increases the strength at which it reports the signal, and does nothing for increasing range. Also, there is a Ka guard, but you should leave that on.Originally Posted by sosail
Thanks for replies. I didn't know if leaving in A mode it would work
as well with all bands without having to program.
bigb3500, You mentioned leaving the Ka guard on. Is this on in the A mode setting?
Thanks.
You have to go into the proramming mode as described at the top of this section.Originally Posted by sosail
"A" means all bogeys mode and is not the same as "autoscan" found on bellscort products if that is what you are implying.
A mode is like highway mode on those detectors.
If you run in A mode it should detect at its maximum ability. It will not filter any k or x band alerts such as little l or L mode (k band will only be filtered if k band automuting is programmed)
Bookmarks