what dose the "J" alert mean? Ive gotten that a couple time![]()
what dose the "J" alert mean? Ive gotten that a couple time![]()
It's a J-out. It has picked up a junk signal and is letting you know it isn't a legitimate alert. This happens mostly when cobras are around because they leak so excessively.
Here is the section in the owners manual that addresses it:
Hope that helpsWhat the “Dee-Dah-Doo” Tone means
Valentine One is designed to recognize — and ignore —
phony POP signals transmitted by poorly-designed
detectors. Occasionally a false alarm will be started before
verification is certain. If it then determines the source is a
junk detector, it will notify you it is retracting that alert with
a “Dee-Dah-Doo” sound. A flashing J ( ) indicating “junk”
will flash briefly in the Bogey Counter.
Last edited by stevo1569; 05-14-2009 at 06:09 AM.
gsxr....turn pop off and you will receive 99% less J outs....
Ask Mike - Report #3
Mike Valentine is W8MM on this forum:
V1 question...What is the "J"?? - 6speedonline.com Forums
From your Instruction Manual Addendum sheet:
"A New Warning
V1 has a new feature. When the signal identification system determines that a current warning is not, in fact, a radar threat, it notifies you with a "dee-dah-doo" sound and terminates the warning. At the same time, the letter "J" will flash briefly in the Bogey Counter."
"J" stands for "J"unk signal.
OK, why did we add this new feature? Because it was the best way to give beyond-line-of-sight warning capability for POP-radar signals while not burdening the user with an excess of unresolved alerts (false alarms).
POP signals are short bursts of radar that last only some tens of milliseconds. They are made short in an effort to escape the notice of radar detectors. Simply speeding up the search process of a detector allows high probability-of-intercept for the POP transmissions but introduces another nasty problem -- microwave interference generated by radar detectors in other vehicles causing false alarms.
There are many hundreds of thousands of certain model BEL, Cobra, Radio Shack, and Uniden detectors that manage to transmit radar-like signals that mimic POP bursts to an infuriating degree. They litter the airwaves with interference bursts on the same, exact frequency as, and similar duration to, a real POP-radar signal. Without some way of fending off these "J"unk signals, a detector would constantly nag its user with false alarms from these poorly designed "poluters" in other cars.
The common method of reducing the number of false POP alarms used by our competition is to reduce the sensitivity to POP signals (and their Junk kin) while leaving longer-lasting (over half a second) signals unmolested. This method requires reducing POP-radar range to line-of-sight-only distances in order to give enough relief from detector-generated false alarms to be worthwhile. I wasn't satisfied with only line-of-sight range for POP radar reception, so we pushed for a better solution.
I did nearly 10,000 miles of development driving, dodging speed traps and logging false alarm situations, while our engineers reorganised and optimised the false alarm rejection methods we finally chose. After lengthy deliberations, we realized that it was almost impossible to prevent every POP-like false alarm without taking too large a hit in POP-radar over-the-hill range. I decided that letting in a few POP-junk false alarms initially that were later announced to be "J"unk was less of a problem than not finding out about a POP radar until too late. I hope you'll agree.
On the technical aspect, the V1 checks for falses for about 200-600ms on Ka band (depending on frequency) before starting to alert to the presence of a signal.
Once it begins alerting to a signal, it continues scanning for harmonics that could indicate a junk radar detector is causing the alert. If it makes this determination, then it will "take back" the alert by flashing J on the screen (i.e. 'oops, never mind').
i HATE cobras... theres nothing like passing going 20+ above PSL and then full KA aleart, slamming on your brakes, then getting the J out and speeding back up
There's also a very helpful Tips and Tricks article here: http://www.radardetector.net/forums/...fo-tricks.html![]()
Bookmarks