Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 39
  1. #11
    Newcomer
    Join Date
    Jul 2010
    Location
    SouthEast CT
    Posts
    8

    Default Re: Quick Mounting Question

    I don't mean to hijack the thread, just wanted to add to the original question:

    I have my detector mounted high to the left of the RVM at the moment but my windshield has some curvature to it and even when I place the detector practically ontop of the RVM the detector is still pointing off-center (to the left), will this hurt my RD performance? Should I mount the RD in the green spot (pic included) directly below the RVM?

    Thanks for any helpful information in advance!


  2. #12
    Good Citizen
    Join Date
    Jun 2009
    Location
    Buffalo, NY
    Posts
    163

    Default Re: Quick Mounting Question

    I would keep it where it is (or move it to the right of the RVM). Have you tried moving one suction cup up or down to account for the curve? At any rate, a curve in the windshield shouldn't affect the levelness of the detector enough to affect performance.

    If you're still concerned, check out GOL's off-axis tests on the V1.

  3. #13
    Newcomer
    Join Date
    Jul 2010
    Location
    SouthEast CT
    Posts
    8

    Default Re: Quick Mounting Question

    Thanks so much Progress that was EXACTLY what I was looking for and it appears that being slightly off center does not effect the V1 performance much at all

  4. #14

    Default Re: Quick Mounting Question

    Hey everyone, I ended up mounting mine just below the RVM and in the center of my windshield. Mcmsweet, do you have any decrease in your performance having the V1 offcenter? Cause i know the manual states for optimal performance putting the v1 centered between the two pillars give the best performance.

  5. #15
    Newcomer
    Join Date
    Jul 2010
    Location
    SouthEast CT
    Posts
    8

    Default Re: Quick Mounting Question

    Dave,
    I don't have any way to test myself but the link Progress posted (Guys of Lidar Off-Axis Test) states I should have roughly a 15 percent decrease in performance on radar straight ahead if my detector is 5 degrees to the left of center, so I will probably mount the detector in the center under the RVM

  6. #16
    Good Citizen
    Join Date
    Jun 2009
    Location
    Buffalo, NY
    Posts
    163

    Default Re: Quick Mounting Question

    I would prefer to have it off to the side and above the RVM than centered and below it. That may just be me though.

  7. #17

    Default Re: Quick Mounting Question




    Heres the setup i've got right now
    Last edited by davemaster223; 08-26-2010 at 07:41 PM.

  8. #18
    Good Citizen
    Join Date
    Jun 2009
    Location
    Buffalo, NY
    Posts
    163

    Default Re: Quick Mounting Question

    That's screaming for attention.

  9. #19

    Default

    Quote Originally Posted by Progress View Post
    That's screaming for attention.
    From whom? Other people? They can't see thru the tinted windows in the rear :-) but ultimately that was the best place to put it so I could also conceal all the wiring. The only thing that does bother me Is it gets hot but that's the case when it's mounted on the windshield.
    Last edited by davemaster223; 08-26-2010 at 10:28 PM.

  10. #20
    snoopyc4
    Guest

    Default Re: Quick Mounting Question

    Quote Originally Posted by davemaster223 View Post
    Quote Originally Posted by Progress View Post
    That's screaming for attention.
    From whom? Other people?
    And LEOs. At night especially, everyone will know you have a RD when your V1 goes off.

 

 

Similar Threads

  1. Quick Question Regarding my V1
    By davemaster223 in forum Valentine One
    Replies: 1
    Last Post: 07-30-2012, 11:27 PM
  2. quick question
    By punkzappa in forum Valentine One
    Replies: 4
    Last Post: 03-04-2009, 08:13 AM
  3. Quick question
    By lammy08 in forum Valentine One
    Replies: 4
    Last Post: 02-09-2008, 01:33 PM
  4. Quick question about mounting
    By Jabomb9 in forum Beltronics
    Replies: 14
    Last Post: 12-06-2007, 08:46 PM
  5. Quick mounting question
    By kuba in forum Radar Detectors - General
    Replies: 3
    Last Post: 10-30-2007, 09:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •