Results 1 to 6 of 6
  1. #1
    Newcomer
    Join Date
    Jun 2011
    Posts
    7

    Default Trying to understand something in relation to my XTR695

    This morning I drove by a group of bike officers camped in the median gunning people. I was traveling at correct speeds so no issues, however I was concerned as my 695 didnt sound at all. I recently mounted it higher on my windshield ( just left of my mirror in fact) which is supposed to have better accuracy.

    I guess what Im wondering if its its likely that they were using laser and during my time near them they never gunned in my direction, or that there is something up with my RD? Or possibly something else?

    Being 10ft from the guys and seeing them with gun in hand but no alerts was definitely concerning.

    Thanks for helping a newb

  2. #2
    Experienced
    Join Date
    Jun 2011
    Location
    Peoples Republic of NY
    Posts
    231

    Default Re: Trying to understand something in relation to my XTR695

    sounds like laser to me...

  3. #3
    Radar Fanatic
    Join Date
    Mar 2009
    Location
    In a town full of undercover leos blasting c/o Ka
    Posts
    1,907

    Default Re: Trying to understand something in relation to my XTR695

    X2 on laser. Don't worry there are ways to defend against laser and a radar detector isn't enough.

  4. #4
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,805

    Default Re: Trying to understand something in relation to my XTR695

    Were they holding the gun up to their face, as if to look through a HUD/scope/viewfinder piece on the top to aim it? If so, it was laser. Also, laser guns have lenses (most guns have 2, either side by side or one above the other) on the business end.

    There's pics of the most commonly seen lidar (laser) guns here: Laser Guns - Guys of LIDAR See if any of them look familiar.
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


  5. #5
    Newcomer
    Join Date
    Jun 2011
    Posts
    7

    Default Re: Trying to understand something in relation to my XTR695

    From the brief look I got I would say it resembled the ProLaser III from the site. So if it was the laser gun, then the beam for laser is much narrower and he likely didnt point it at me? Or could it be that my RD doesnt pick up certain types of Laser? Thanks!

  6. #6
    Yoda of Radar
    Join Date
    Oct 2007
    Location
    Los Angeles Area
    Posts
    13,879

    Default Re: Trying to understand something in relation to my XTR695

    Quote Originally Posted by Roach View Post
    From the brief look I got I would say it resembled the ProLaser III from the site. So if it was the laser gun, then the beam for laser is much narrower and he likely didnt point it at me? Or could it be that my RD doesnt pick up certain types of Laser? Thanks!
    Your radar detector can detect laser if the laser gun is pointed at it. The problem is that a laser beam is just what it sounds like, a beam, which emits a very narrow cone of infrared light. On the average, the beam is about 3ft in diameter at 1000ft distance from the laser gun. So, say the LEO shoots your car when it's 500ft from him. The beam diameter would be about 18 inches or so. If he's aiming at your grille(which most do), your windshield mounted radar detector is very unlikely to detect it. On the other hand, if the LEO targets your car at about 2000ft, the beam diameter will be about 6ft. In that case, your radar detector would have an excellent chance to detect that shot.

 

 

Similar Threads

  1. XTR695 Set Up!
    By benelliboy in forum Introduce Yourself
    Replies: 1
    Last Post: 07-31-2009, 05:30 PM
  2. Bel STi FCC ID relation
    By lilleboy in forum Beltronics
    Replies: 7
    Last Post: 02-19-2008, 10:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •