problem - silent RX65

**maris** · 10-08-2006, 12:55 PM

hello,

I have the problem with my RX65

I bought it 4 months ago, it
worked perfectly but suddenly one day after switching it on,
my RX65 got silent. Radar detection works Ok, but only the visual
alert, without any beeping. Volume adjusting, switching AutoMute
and reseting didn't help, it remains silent.
Could you give any advices, other than returning RX65 back to the dealer?

thank you,
Maris

**mrcllusb** · 10-08-2006, 01:08 PM

Nothing else i can think of but to return it...

**Ace_Racer** · 10-08-2006, 01:36 PM

Here is what I can offer you:

First make sure that the volume is up (hold the volume button and make sure you see some bars next to the arrow) Obvious I know but sometimes it is those type of things that cause the greatest problems. If the volume is set at an audible level, try turning it off and unplugging the power cord ( if hardwired then the cord on the Bel) otherwise unplug the cig adapter. Wait about 1 minute or so and then plug back in and turn on the Bel. If that fails then use this final step as a last resort.

First make sure you know your settings ( i.e. X off, K on, and so forth) then turn the Bel off and this time hold down the city and the BRT buttons and hit the power button. Note this will reset your Bel to factory settings then it will go through the standard power on sequence (i.e. Bel Pro RX65, LASER, KA, and such) If still no volume then I say your only option is returning it.

Hope these steps help you!

Ace

**proudNMAmember** · 10-08-2006, 02:37 PM

1rst thing you should do since it's an RX65 is reset the detector. I think everyone should do this at least once a week. 2nd, check the small speaker inside of your detector, it might not be working. 3rd, send the rd back to BelEscort to have them check it out thorougly.