Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Bel Vector 940

  1. #1
    Newcomer
    Join Date
    Jan 2007
    Location
    Upstate NY
    Posts
    26

    Default Bel Vector 940

    Hey everyone. Newbie here. I have a few questions that i hope someone can answer for me. I was in the market for a new RD with a limited budget. I previously had a crapra and wanted to upgrade (not hard to do). After reading some of the posts i decided on a new Bel Vector 940. I think i made a good choice as it saved me the first day i had it. I have a few questions though. What are your thoughts about enabling POP? I have read alot of different opinions for each side. I live in upstate new york, albany area. Anyone know if LEOs have it here yet? Also can i leave the power on when starting the car so it turns on automatically, without hurting the unit? And finally does anyone know how the range on the 940 stacks up to the higher end Bels. Thanks.

  2. #2
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default alpine

    Alpinestars has a Bel Vector 940 and seems to like it. As far as leaving the rd plugged in and then starting your vehicle, you can do this but the preference on here is to not do that because their is always a potential in harming your unit that way. My suggestion on POP mode is to try your rd w/ POP mode on and then try it w/ POP mode off to see what suits you best. Some on here prefer POP on and others prefer POP off due to the falsing. Good luck and welcome to the board newbie!

  3. #3
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default

    I agree, if you don't get a lot of falses with POP or can stand the falses, leave it on (I am not sure if it is used there or not).

    I have a 'kill switch' attached to my hardwire, so I don't turn the RD on until after I start the car (if i remember to turn it off the last time I got out of the car). However, you will notice that if you have it on, it will 'restart' when you crack the car up. That is because power is momentarily turned off during the process, so you should be ok. I often forget to turn my kill switch off and when I start up the car, I hear my RD restart.

    I haven't had any problems yet, but I still try to make sure that the switch is turned off before I start my car.

    Obviously, the 940 isn't going to have the range of the 965 or higher models, but you should be ok if you are smart and if you aren't a speed demon.

  4. #4
    Newcomer
    Join Date
    Jan 2007
    Location
    Upstate NY
    Posts
    26

    Default

    Thanks for the good info. I turned on POP today to try it out. I'll check it out over the next few days and see how it works.

    One other question. I'm planning a trip from Upstate New York down to South Carolina in the next few weeks. Be mostly on I-95. Anyone know if I'll be running into alot of Laser on the way? Also i heard New Jersey is still using X band?

  5. #5
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default

    NY has tons of laser (so I have heard). I don't go there often, but the few times that I have, I saw laser, so I believe it

    VA is illegal to have an RD, just so that you are aware of that and don't place it in plain view. I haven't seen laser on 95 through VA. WATCH OUT FOR EMPORIA (about 10 miles north of the VA/NC line) They are ALWAYS out there, ALWAYS will give you a ticket, and it doesn't take a lot for them stop you.

    NC has a lot of Instant On (IO). I got a ticket there because of IO.

    SC, my mother in law lives there and I can't really remember about SC...lol. The last time I went down I ran across a few LEOs but they already had ppl pulled, so i don't if they had CO or IO.

  6. #6
    Old Timer
    Join Date
    Jul 2005
    Location
    Great Lakes
    Posts
    6,538

    Default watch

    Watch out for X band in use in NC.

  7. #7
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default Re: watch

    Quote Originally Posted by proudNMAmember
    Watch out for X band in use in NC.
    X band isn't really used on I-95 thru NC. However, it is used by locals on the off beaten path. So, yeah, still watch out for it, they may want to get on the interstate anytime.

  8. #8
    Newcomer
    Join Date
    Jan 2007
    Location
    Upstate NY
    Posts
    26

    Default

    Thanks for the info. You guys are a big help to this newbie. When i get back from my trip to SC i'll post what i found out about my trip down the east coast. Sounds like i'm going to run into all different kinds of radar and laser. Hope the 940 is up to it and i don't get to meet up face to face with a LEO.

    Now the girlfriend wants an RD in her car. Can only spend about $150. Should i go with another 940 or the whistler pro-73?

  9. #9
    Radar Fanatic
    Join Date
    Jan 2005
    Location
    ARIZONA
    Posts
    2,554

    Default

    New Jersey is indeed still using X band.

  10. #10
    Professional
    Join Date
    Feb 2006
    Location
    Richmond, Virginia
    Posts
    1,397

    Default

    Quote Originally Posted by CactusMan
    New Jersey is indeed still using X band.
    Yeah, NJ does!!!!!!!! I was thinking VA and NC as far as I-95

 

 

Similar Threads

  1. Bel Vector 995 v5
    By gaucho in forum Beltronics
    Replies: 1
    Last Post: 06-25-2010, 07:13 PM
  2. bel vector sti AU-NZ....anyone knows it?
    By vtec4u in forum Beltronics
    Replies: 12
    Last Post: 09-23-2007, 05:31 AM
  3. Bel Vector 985
    By phillyflyers50 in forum Beltronics
    Replies: 14
    Last Post: 06-08-2006, 12:00 AM
  4. New to the Vector 895
    By SportsFan in forum Beltronics
    Replies: 39
    Last Post: 04-17-2006, 08:00 AM
  5. Just Got the Vector 985
    By Ford_Focus_05 in forum Beltronics
    Replies: 7
    Last Post: 12-01-2005, 04:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •