ok iis it better to use auto scan or highway mode. is the range different in highway mode. do all bands still work in highway mode or just radar. one time i had mine i highway mode and i didnt pick up laser. does laser only work in auto scan?
ok iis it better to use auto scan or highway mode. is the range different in highway mode. do all bands still work in highway mode or just radar. one time i had mine i highway mode and i didnt pick up laser. does laser only work in auto scan?
What unit do you have? If you have any unit besides the Sti, autoscan really only affects X band. On the Sti it affects X and K bands, by detecting pairs of band like door openers etc. There are many threads on this if you research them.Originally Posted by ryansrt4
As for laser Autioscan does not affect it.
Laser detection works the same in all modes, but is difficult to detect at close range with a windshield mounted radar detector.
I keep my RX65 in AutoScan mode almost all the time. I've never missed a real alert with it, and it dramatically reduces X band falses. I haven't noticed any reduction in range from using AutoScan. I used to run Highway mode all the time but I've gotten to like the much quieter ride using AutoScan.
sorry i have rx 65. i just thouht that there might be better range in highway mode. if not then what is the point of highway mode. my detector works good. ive noticed so range issues but then i think its a cop using instant on.
Highway mode basically makes your RD extremely sensitive to ALL incoming signals, be it actual radar or door openers. This is why it is suggested, especially on the open road, that you set your detector in this mode.Originally Posted by ryansrt4
AutoScan engages a filter for pairs of X band microwave door openers. On the STi, AutoScan also engages a similar filter for pairs of K band door openers. AutoScan also causes a 1 second delay before any fairly weak yet real radar alert is displayed. The reason is that, during this 1 second, the radar detector is doing more thorough checks to rule out a false alert caused by another nearby radar detector or from other types of false radar sources.
AutoScan mode is fine to use in all driving conditions except mountainous or very twisting and winding terrain. Always use Highway mode rather than AutoScan when driving through mountainous and/or very twisting and winding terrain. Why? AutoScan's 1 second delay under such driving conditions could make the difference between getting a ticket or not.
Highway mode may cause you to get the occasional false alert due to another radar detector or from some other type of false radar source.
Laser sensitivity is always optimal regardless of the operating mode, and laser alerts always override all other alerts.
ok this is very helpful. i drive the same roads all the time i drive fast everywhere. and the road i take to work is in the middle of the city but it has very many twists and turns an blind hills and all that. there has been time that my rd has gone off right before i get to the top off the hill just enough time to slow down. the false alarms are fine i can tune them out but i guess i need the sensetivity. i have another question but i gonna start a new thread for more input due to the title of this one. thatnks everyboday
Bookmarks