NOOBIE on K band & 9500ci

[taylorcoleman]

Hi all.

I have an area where there is always a false on K band at 24.198 (sometimes 24.200). In that same area, there is sometimes a LEO running K band at 24.142. I have autolearn off. If I lock out the area on 24.198 will it also lock out 24.142? I ask this because I'm just not clear on how many significant digits are locked out in the same GPS geography. Can the LEO run different K band frequencies? Sorry, no nothing about radar & have been very happy with the information (albeit very little) that I've gained from this site so far. Looking forward to the experts to weigh in.

[category4]

It's not suppose to lock out the LEO,but there hae been stories on here where it has. To be safe I would not, or do as I have done and run a V1in little "L" mode with X band and POP off just in case it does lock out a LEO.

[M6D]

I think the lockout frequency looks at 5MHz increments, so you should be fine.

[MEM-TEK]

I think the lockout frequency looks at 5MHz increments, so you should be fine.

Its actually closer to 10MHz, but nevertheless the frequencies in the example above will be fine.

[djrams80]

But, if that LEO sits in that same exact spot a lot, with autolock enabled, the 9500ci could automatically lockout that LEO also. This has happened to my brother and also a few forum members.

[taylorcoleman]

Its actually closer to 10MHz, but nevertheless the frequencies in the example above will be fine.

Thanks to you both. So the frequency lockout is that sensitive...good.

[taylorcoleman]

But, if that LEO sits in that same exact spot a lot, with autolock enabled, the 9500ci could automatically lockout that LEO also. This has happened to my brother and also a few forum members.

yup. i hear that. i've been careful when i previously had autolearn on, and had to unlock an area for that reason.