Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24
  1. #11
    Newcomer
    Join Date
    Sep 2010
    Posts
    47

    Default Re: Couldn't get multanova with 9500ci

    Hi Rahamax
    I am also using the Stinger. Can you tell me what is position A an B ?
    My cable on SA is on left and right . What is this position ?

  2. #12
    Experienced
    Join Date
    Feb 2007
    Location
    Slovak Republic, Europe
    Posts
    240

    Default Re: Couldn't get multanova with 9500ci

    Quote Originally Posted by Ghost_9 View Post
    I live in saudi arabia. We have two kind of they call it "saher". One is using multanova and other vitronics. My western area of saudi arabia using multanova and only radars are been used. Others are using vitronic laser. Back to escort 9500ci i believe mounting wasn't the problem because it didn't detect any thing not small k when approaching to multaradar c And that's why i came to point i believe this isnt multaradar issue. My escort 9500ci got problem maybe when updating it , i failed to do it right.


    Stinger card very expensive ? What is the lowest price you guys found it? I dont want the whole package i just need spectrum analyzer with basic functions to make it works. But i have been advise that stinger only fit for k band and little of ka. And it can't detect mobile ka and other ka. So it's going be specially for multanova.
    Just to clarify for the others - you mean multaradar k band 24.100GHz. although it still has the "multanova" brand on it when we say multanova this normally refers to multanova 6f which operates on 34.3GHz.

    card is normally around ~1100e including the SA. card would be the cheapest option DSI on the other had has some nice K band filtering possibilities and other userful settings. it covers both K and Ka and very well; however not superwide Ka. what Ka band radars do you have in saudi arabia?

  3. #13
    Experienced
    Join Date
    Feb 2007
    Location
    Slovak Republic, Europe
    Posts
    240

    Default Re: Couldn't get multanova with 9500ci

    Quote Originally Posted by GQPRO View Post
    Hi Rahamax
    I am also using the Stinger. Can you tell me what is position A an B ?
    My cable on SA is on left and right . What is this position ?
    there are arrows on the rear side of the antenna. when they are pointed left/right [cable coming from top or bottom] that is position A
    your is mounted in position B with arrows up/down and cable coming out on left/right [got that? ]. this is better for multaradar 6f and ramer. where do you live/drive and what radars does your police use?
    Last edited by ragamix; 03-25-2011 at 09:06 AM.

  4. #14
    Newcomer
    Join Date
    Sep 2010
    Posts
    47

    Default Re: Couldn't get multanova with 9500ci

    Quote Originally Posted by ragamix View Post
    Quote Originally Posted by GQPRO View Post
    Hi Rahamax
    I am also using the Stinger. Can you tell me what is position A an B ?
    My cable on SA is on left and right . What is this position ?
    there are arrows on the rear side of the antenna. when they are pointed left/right [cable coming from top or bottom] that is position A
    your is mounted in position B with arrows up/down and cable coming out on left/right [got that? ]. this is better for multaradar 6f and ramer. where do you live/drive and what radars does your police use?
    Thanks Ragamix
    The Multanova 34.3 and Redflex 24.100 are wildly using.
    Now, only the Stinger can work good but it cost too much and I can not bring it to my other car.

  5. #15
    Banned
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    94

    Default Re: Couldn't get multanova with 9500ci

    I have seen a whistler pro78se not even alert to the Multanova 6F running on .3mW of power in the bushes. Other times the pro78se has given 300m warning +
    The valentine one was picking up the 6F hidden in the bushes, with the radar source facing away from the rd's receiver. Just shows that sometimes some radar detectors don't recognize such a low powered level of scatter. A bit surprised if 9500ci didn't even alert, but I could believe it.

  6. #16
    Experienced
    Join Date
    Feb 2007
    Location
    Slovak Republic, Europe
    Posts
    240

    Default Re: Couldn't get multanova with 9500ci

    i'm guessing ireland? anyway what kind of radar sensor does redflex use? do you know?
    yes stinger costs more but you get what you pay for and as you just said it's the only one that works. since multanova 6f is horizontaly polarized and if redflex is vertically polarized just like multaradar than i suggest you remount the antenna to be at 45degree angle (compromise solution) or even better (but more expensive) is to add one more spectrum analyzer (they need to be at least 90cm apart from each other to avoid interference). and YES you can connect more that one antenna to a stinger DSI or Card to always get the max possible detection distance

  7. #17
    Experienced
    Join Date
    Feb 2007
    Location
    Slovak Republic, Europe
    Posts
    240

    Default Re: Couldn't get multanova with 9500ci

    Quote Originally Posted by Rowan View Post
    I have seen a whistler pro78se not even alert to the Multanova 6F running on .3mW of power in the bushes. Other times the pro78se has given 300m warning +
    The valentine one was picking up the 6F hidden in the bushes, with the radar source facing away from the rd's receiver. Just shows that sometimes some radar detectors don't recognize such a low powered level of scatter. A bit surprised if 9500ci didn't even alert, but I could believe it.
    dont get confused here. multanova is a product family - multanova 6f is a Ka band radar as you know. but MultaRadar is a different device (also has the multanova trademark on it) that operates on K band 24.100GHz and is much more difficult to detect than multanova 6f

  8. #18
    Newcomer
    Join Date
    Feb 2011
    Posts
    59

    Default Re: Couldn't get multanova with 9500ci

    Quote Originally Posted by ragamix View Post
    Quote Originally Posted by Ghost_9 View Post
    I live in saudi arabia. We have two kind of they call it "saher". One is using multanova and other vitronics. My western area of saudi arabia using multanova and only radars are been used. Others are using vitronic laser. Back to escort 9500ci i believe mounting wasn't the problem because it didn't detect any thing not small k when approaching to multaradar c And that's why i came to point i believe this isnt multaradar issue. My escort 9500ci got problem maybe when updating it , i failed to do it right.


    Stinger card very expensive ? What is the lowest price you guys found it? I dont want the whole package i just need spectrum analyzer with basic functions to make it works. But i have been advise that stinger only fit for k band and little of ka. And it can't detect mobile ka and other ka. So it's going be specially for multanova.
    Just to clarify for the others - you mean multaradar k band 24.100GHz. although it still has the "multanova" brand on it when we say multanova this normally refers to multanova 6f which operates on 34.3GHz.

    card is normally around ~1100e including the SA. card would be the cheapest option DSI on the other had has some nice K band filtering possibilities and other userful settings. it covers both K and Ka and very well; however not superwide Ka. what Ka band radars do you have in saudi arabia?
    Yes. It's multaradar c using k band. I'm sorry i didn't know multinova means some thing else. Anyway multaradar c are very difficult to detect and once detector get it , it will be too late.


    In saudi arabia only radar are using here low power radar is k band for multaradar c. And wide ka for undercover polic cars . Lasers are used vitronics poliscan speed but too far from where i live.

  9. #19
    Experienced
    Join Date
    Feb 2007
    Location
    Slovak Republic, Europe
    Posts
    240

    Default Re: Couldn't get multanova with 9500ci

    no problem really all i wanted to do is clarify the difference. wide ka in combination with multaradar is a problem since stinger does not cover wide ka.. so i guess you might need to run 2 detectors: stinger and bel/escort/v1 for full protection.. and a laser jammer of course when it comes closer to you

  10. #20
    Newcomer
    Join Date
    Sep 2010
    Posts
    47

    Default Re: Couldn't get multanova with 9500ci

    The Redflex is using the same kind of the sensor (Flat) . I think it may be the horizontaly because the V1 detect better with Vercital mount for the Redflex.

 

 

Similar Threads

  1. MultaNova
    By cracker in forum Radar Detectors - General
    Replies: 3
    Last Post: 06-01-2010, 07:27 PM
  2. Multanova?
    By NubeCalgary in forum Valentine One
    Replies: 6
    Last Post: 02-25-2010, 04:11 PM
  3. stationary Multanova 6 and mobile multanova 6 fm
    By UAE in forum Valentine One
    Replies: 1
    Last Post: 09-01-2008, 11:44 PM
  4. multanova
    By RadarRick in forum Radar Detectors - General
    Replies: 71
    Last Post: 08-07-2006, 01:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •