Page 1 of 3 123 LastLast
Results 1 to 10 of 30
  1. #1
    Advanced Member
    Join Date
    Oct 2009
    Location
    Santa Cruz California
    Posts
    3,648

    Default Redline problem again?

    Edit...delete.

    Stoked.
    Last edited by OpenRoad; 04-19-2011 at 12:06 AM.


    2010 Honda Civic Sedan
    Cobra 19 DX IV CB
    Wilson Lil Wil
    Uniden BCT15X Scanner
    Garmin Nuvi 1300
    Saves: More than I can count

  2. #2
    Radar Fanatic
    Join Date
    May 2010
    Location
    WA
    Posts
    2,176

    Default Re: Redline problem again

    This is not good.

  3. #3
    Advanced Member
    Join Date
    Nov 2009
    Location
    Heart of Dixie
    Posts
    1,963

    Default Re: Redline problem again

    How does the unit work on other known sources?

  4. #4
    Banned
    Join Date
    Jun 2007
    Posts
    9,496

    Default Re: Redline problem again

    What frequency?

  5. #5
    Radar Fanatic
    Join Date
    Oct 2010
    Location
    OHIO
    Posts
    1,848

    Default Re: Redline problem again

    Sorry.

  6. #6
    Advanced Member
    Join Date
    Oct 2009
    Location
    Santa Cruz California
    Posts
    3,648

    Default Re: Redline problem again

    Quote Originally Posted by CJR238 View Post
    What frequency?
    24.056


    2010 Honda Civic Sedan
    Cobra 19 DX IV CB
    Wilson Lil Wil
    Uniden BCT15X Scanner
    Garmin Nuvi 1300
    Saves: More than I can count

  7. #7
    Advanced Member
    Join Date
    Jan 2008
    Location
    Upstate New York where the Stalker Dual is King
    Posts
    1,533

    Default Re: Redline problem again

    Quote Originally Posted by OpenRoad View Post
    Quote Originally Posted by CJR238 View Post
    What frequency?
    24.056
    Exellent question CJ!

    And whoa........just 6MHZ inside the normal K Bandwidth (24.050 - 24.250).

    I believe that's why your RedLine is cutting in and out on you OpenRoad......the frequency of that speed sign is hovering right on the fringe. The M3's frequency readout is fairly accurate but not absolute, so the gun itself could be entirely out of spec. The radars in those signs are usually old beaten up units to begin with, then they finish life doing 24 x 7 shifts in a trailer! The RedLine itself might be running a little tight on the low end but I'd give the bulk of the blame to that radar unit. After many many hours of continuous operation the gunn diodes wear out and drift way off center.
    [SIGPIC][/SIGPIC]

  8. #8
    Banned
    Join Date
    Jun 2007
    Posts
    9,496

    Default Re: Redline problem again

    Quote Originally Posted by nine_c1 View Post
    Quote Originally Posted by OpenRoad View Post
    Quote Originally Posted by CJR238 View Post
    What frequency?
    24.056
    Exellent question CJ!

    And whoa........just 6MHZ inside the normal K Bandwidth (24.050 - 24.250).

    I believe that's why your RedLine is cutting in and out on you OpenRoad......the frequency of that speed sign is hovering right on the fringe. The M3's frequency readout is fairly accurate but not absolute, so the gun itself could be entirely out of spec. The radars in those signs are usually old beaten up units to begin with, then they finish life doing 24 x 7 shifts in a trailer! The RedLine itself might be running a little tight on the low end but I'd give the bulk of the blame to that radar unit. After many many hours of continuous operation the gunn diodes wear out and drift way off center.
    Exactly why i asked. Thank you.

  9. #9
    Advanced Member
    Join Date
    Oct 2009
    Location
    Santa Cruz California
    Posts
    3,648

    Default Re: Redline problem again

    I think this is an antenna issue with loose internal connection. Note when I'm stopped dead in front of the sign, as soon as I start to pull away it alerts - likely from the bumpy road causing it to make contact again.

    Unfortunately the video scan rate makes the speed sign unreadable, but you can see it shows speed when cars go by. The video is a little long, as I spent all of 3 minutes editing it....

    Last edited by OpenRoad; 04-15-2011 at 11:50 PM.


    2010 Honda Civic Sedan
    Cobra 19 DX IV CB
    Wilson Lil Wil
    Uniden BCT15X Scanner
    Garmin Nuvi 1300
    Saves: More than I can count

  10. #10
    Advanced Member
    Join Date
    Oct 2009
    Location
    Santa Cruz California
    Posts
    3,648

    Default Re: Redline problem again

    Quote Originally Posted by CJR238 View Post
    Quote Originally Posted by nine_c1 View Post
    Quote Originally Posted by OpenRoad View Post
    Quote Originally Posted by CJR238 View Post
    What frequency?
    24.056
    Exellent question CJ!

    And whoa........just 6MHZ inside the normal K Bandwidth (24.050 - 24.250).

    I believe that's why your RedLine is cutting in and out on you OpenRoad......the frequency of that speed sign is hovering right on the fringe. The M3's frequency readout is fairly accurate but not absolute, so the gun itself could be entirely out of spec. The radars in those signs are usually old beaten up units to begin with, then they finish life doing 24 x 7 shifts in a trailer! The RedLine itself might be running a little tight on the low end but I'd give the bulk of the blame to that radar unit. After many many hours of continuous operation the gunn diodes wear out and drift way off center.
    Exactly why i asked. Thank you.
    I'll go with that for now, and do a bit more checks. Kinda scary to see a sign reading speed on cars with no alert, or a scattered one.


    2010 Honda Civic Sedan
    Cobra 19 DX IV CB
    Wilson Lil Wil
    Uniden BCT15X Scanner
    Garmin Nuvi 1300
    Saves: More than I can count

 

 

Similar Threads

  1. Bel 980 Problem ?L01 cal
    By cerino2000 in forum Beltronics
    Replies: 2
    Last Post: 09-05-2008, 04:37 PM
  2. LRC 100 problem
    By gib163 in forum Laser Jammers - General
    Replies: 3
    Last Post: 01-24-2007, 07:29 PM
  3. RX 65 Problem???
    By Joe in forum Beltronics
    Replies: 7
    Last Post: 05-21-2006, 01:01 PM
  4. First problem with Bel STI Already!!!!
    By stealthJamal in forum Beltronics
    Replies: 37
    Last Post: 04-28-2006, 08:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •