
Originally Posted by
EscortRadar

Originally Posted by
teeto
I disagree. If the trooper is using even a "fast instant-on", not even true quick trigger....prepare to get owned. Best for CO and 1 second blasts of IO but anything else and you are owned.
I had 2 and sold them both after playing with a MPH Bee 3 Ka unit and seeing how blind they were to instant-on. My V1's and RX65 NEVER miss IO, even QT. They are the only detectors I will run until Escort gets their sh!t together on the Redline. Huge potential there and they have the technology but are afraid of a higher return rate.
And you probably had the RedLine in Auto mode and were shooting it point blank with your MPH gun...

RedLine detects instant-on radar very well.
Um, no...nice try. How about HWY mode with X-off, pop off...just like I ran it in the real world. One detector at a time, etc etc etc.... Distance was approximately 1/2 mile on a straight, flat road. MPH Bee 3 Ka antenna was aimed from just off the side of the road, just as the city of Tampa LEO that sits there 3 x's a week. As soon as you round the corner...BAM! The street is lightly traveled and is posted at 35 but it is common for people to run 60 down it as both sides are wooded.
Before the car was even close (approximately 1/4 mile = total dist approx 3/4 mile)to the corner I would start a QT method approximately every 3 seconds, I was able to obtain the vehicle speed 100% of the time as soon as it was visable, cruise control was set at 35 and ONLY time the redline made a peep was during a traditional IO method of approxiametly 1 second. This was done with TWO different Redlines that were well under a year old. My RX65 is 4 years old and picked up almost all the QT blasts well before rounding the corner, my V1 did better and picked up the QT as soon as the test was started. The Solo S2 did not pick up a single QT or fast IO.
So again, your Redline SUCKS at "Fast IO" and the even faster QT methods of operating radar. I truly wish it didn't, I like the Redline alot and in all reality would prefer it to my V1 due to the display, style, size, and controls. Until it is as good as my RX65 for IO I wont buy another. The technology is obviously there, so why not use it? For $500 it definately should be included.
If you want to have the baddest detector on the block, make it see QT and FAST IO.
Also, make a display mode that automatically switches from the 1-signal bar graph to the Expert mode as soon as another signal is detected. That would be a really nice feature, as many prefer the standard but do not want to be in the dark about a second, weaker signal.
Finally, the truth is the truth. If anyone around Tampa wants to test their Redline, 9500ix, etc against a Bee 3...just PM me, the Bee 3 Ka is the model supplied to Hillsborough County SO.
In my tests,
Bookmarks