New Feature on the LI

[ELVATO]

I think it would be pretty cool if you could, at the push of a button, have the LI recall the last gun that shot you. That way you don't have to jam until the end of the voice announcement to see what shot you, or in case you missed it because of rolled down windows, or what not.

This shouldn't be too hard, since the LI keeps a list of what it has encountered, right?

As for the Cheetah thing, I don't think it would work too well since the LI uses a voice alert, while the Cheetah is just a piezo speaker, right?

[crazyVOLVOrob]

As for the Cheetah thing, I don't think it would work too well since the LI uses a voice alert, while the Cheetah is just a piezo speaker, right?

There is a guy on youtube that figured out how to use the cheetah stuff and get the LI alerts.

But honestly as cool as hearing what gun I am being shot with is, it is not a needed a feature. I just need to know my jammer has been activated so I can slow down

[Darkflame]

If you got a good set of electronics skills you can incorporate a circuit that would kill power to the LI once you reached the speed limit during a jam.

I have a project on my busa that's almost complete. The problem I am facing though is finding a program that has a database of speed limits. Here's my setup.

HTC Vogue Pocket PC
Mapopolis <--This gps program has speed limit notifications it will send a alert sound if you are over the limit.
This alert sound is fed via audio out. The alert is a square wav audio clip that basically applies constant voltage via 3.5mm to an external circuit board.

This is how it works.
LI jams, grounds the mute wire.
This trips a relay activating the circuit board.
The circuit board checks for voltage pings on the audio line. It checks every 20ms. If no pings are detected for 10 pings (2 seconds) it pulls another relay that grounds pins 1 and 7 on the db9. This puts it in parking mode.

The LI will stop jamming and stop alerting, this will release ground, which will deactivate the circuit which will release the relay putting the li back in "parking deactivated" (jamming) mode.

I hope you kinda understand the concept.

Speed, Get the alert, Slam on brakes and after you reach the psl the unit will automatically shut off within a max of 2 seconds.

Only problem is mapopolis is no longer supported so the maps are outdated. This leaves a lot of holes in the speed limit database. Also, let's say you are reaching the end of the speech, and you hit the psl. It'll activate parking mode but the speech will stop and it will go immediately back into jamming mode. (I'll add some code to give the device more time before going back to jamming mode)

I'm trying to research other gps programs that offer an ability to alert when driving over the psl.

Once I figure that out i'll look into integrating it.

[tactical22]

maybee they could implement a Reigel False allert suppresor...lol Im sure Alpine would love that feature!!

[MetalFlame]

I agree with crazyVOLVOrob,LI should have the jam timer(as an on/off option),a red LED display,just like STi-R has,that would display pulse rate or name of the Gun and the option to get alerts after you turn off jamming.

[category4]

I wouldn't mind the option to set the jammers to fire for a specific amount of time, but as an option that you could turn on and off. I also wouldn't mind a display to show what type of lidar is targeting you, something similar to the 9500ci display.

[djrams80]

I want to know if I'm being shot from the front or the rear.

[Atlas]

I want to know if I'm being shot from the front or the rear.

Definitely this, and some sort of LED alert would be nice.

[YTCD]

Definitely this, and some sort of LED alert would be nice.

ARROWS!! Ohh wait never mind lol

Yeah a display and alert led would be nice. I think making it more towards user oriented and more sophistacated would be nice, more settings and s*** like that.

[interceptor]

Definitely this, and some sort of LED alert would be nice.

LED on switch is blinking when alerting...