Delay timer help

[tvbi]

Would this timer works to delay the power after I start the car for 3 AL8 heads and a V1? THanks

http://www.goldmine-elec-products.co...?number=G16041

[sixfootgeek]

Look for a DEI 528T pulse timer relay. I got mine on feEbay for 10 bucks. You can adjust it from a few seconds up to 90 secs. Works great!

[vw242]

Thanks for the tip. I installed mine today using the timer as a ground circuit. If memory serves:


DEI-528t Timer

Valentine One time delay to accomodate voltage spikes.

Red- positive. (ignition)

Brown will be powered after delay so tape off.

Black,Yellow,Black/stripe to ground.

Orange to V1 ground (at rest will be closed and open for 5-90 seconds when voltage is applied, then closed)

notes:

I set the timer for 15sec and if voltage is applied it will start the count. Once activated it will remain so for about 5sec after power is removed.

[zfactor]

you mean you hooked the red to ign power... correct otherwise it would be on all the time if the red was constant and the black/yellow/black stripe were grounded...where would the "pulse" be then you would have to disconnect the red then reconnect or disonect the black stripe then reconnect...