Hi,
Does anyone have a list/chart of all the error codes on this gun?
Anjoem
Hi,
Does anyone have a list/chart of all the error codes on this gun?
Anjoem
I will post that info for you tomorrow.
Thanx ... awaiting your response![]()
Display codes Jenoptic LaserPatrol
----------------------------------------------------------------------------
E10: Missing measurement ; No target sensed or too far
E11: Incomplete measurement ; Target sometimes obscured or at limit of range
E12: Unstable measurement ; Irregular target contour or equipment wobbled
E13: Distance measuring range ; Target too close (<10m)
E14: (JAMMED) Measurement distorted ; Target has laser jamming transmitter or laser distance sensor
E21: LO BATT
E22: HI BATT (Remote supply voltage too high)
E23: LO TEMP ; < -10 deg. C
E24: HI TEMP ; > 50 deg. C
I left out the system fault codes in the range E31 to E48
- Mostly E12 and sometimes E11 are generated when I test with a jammer
- E14 is generated using a dumb jammer, or (some) other jammers at very close range.
- This is a LaserPatrol with the old software
- When jammed with a non stealth jammer, it starts screaming and stops making measurements.
- In this version the LaserPatrol is extremely easy to jamm, even a 1000Hz pulse from a laser or Led array jamms this gun.
- This gun covers speed measurements in a speed range from 0 km/h to 250 km/h within a distance range of 10 m to 400 meter.
- Pulse rate is 100Hz.
Thanx fulcrum....
Rumour goes around that there is a new firmware available for this gun, which makes it more sensitive to the E-14 error code... any info on that and which jammers have been tested against the Oct/Nov firmware?
Very good info .... in banned jammer area , could be safe to equip his car with a ''laser distance sensor '' , anyone knows such item in aftermarket ?E14: (JAMMED) Measurement distorted ; Target has laser jamming transmitter or laser distance sensor
I think Lexus use such sensor....too expensive car for me.... :shock:
I said easy to jamm, this needs some explination:Originally Posted by anjoem
- The LaserPatrol is so sensitive to pulsed IR light sources, that even a stroboscope or an TV remote control generates the E14 code.
- The moment E14 is active, the LaserPatrol stops the measurement and is only busy showing E14 and gives a alarm sound.
This last behaviour is different than in many other guns, these guns still try to get a measurement.
- The software in the LaserPatrol is also not very efficient. A complete speed measurement takes 0.4 secs (40 pulses at 100Hz). Even in case of one missed pulse reading, it restarts the whole 40pulse measurement.
Hi Fulcrum, nice info indeed. Do you happen to have any info on Riegl guns (LR 90/235P and FG-21P)?
Get LPP or AL :POriginally Posted by 411
Now what would be really cool is if you could hack the computer inside the car, and use the factory laser system as a jammer.![]()
![]()
Bookmarks