did you have them both turned on at the same time in the car or did you test one then the other.. while making sure one was powered off..??
did you have them both turned on at the same time in the car or did you test one then the other.. while making sure one was powered off..??
powered on at the same time (simultaneously) during the run's^
You do know your comparing a 270 dollar detector to a 400 dollar detector right?
As I said in the original post:Originally Posted by zfactor
"On various passes I used both units at the same time and one at a time, to rule out interference between units from their LO's. I also swapped positions. I covered all the bases to compare the units."
.... when using one unit at a time, I pulled the power on the unused unit.
Jim can confirm this. If you run the V1 and RX65 besides each other and while detecting the same cop radar the V1 can be "J"ed out by the RX65 so this may the same with 995.
Also good on you for this thread that's what a man would do :wink:
Why didn't you try the Rx65? That fairly regularly tests well.Originally Posted by gdavis9999
x2, a $270 unit vs. a $400 dollar one, and he is pumped the V1 beat it... that should be expected on all bands.Originally Posted by carbonhed
BEL makes the same claim for the 995 in its ads, as does Craig Petersen on his radar testing site.Originally Posted by TheTexan
FYI, MSRP for 995 is $299, and $329 for RX-65.
GTO_04
FYI where we should get all our non-V1 units:Originally Posted by GTO_04
http://www.radarbusters.com/products/beltronics/995.asp
So its a 270 dollar unit.
:wink:
Sounds like he bought the both of em, don't it geniOus.Originally Posted by AirMoore
Der Dee Der (mencia)
Bookmarks