Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Malfunction?

  1. #1
    Speed Demon
    Join Date
    Apr 2006
    Location
    Illinois
    Posts
    660

    Default Malfunction?

    I noticed when my V1 is near more than 1 strong radar source it seems to bounce around from the strongest signal to weaker ones. Let me explain a bit more...

    So I drive up to this mall and there is about 7 false X and K band alerts that I get. I noticed my V1 would go from full alert K then randomly switch to X band and about 3 or 4 leds on the signal meter. And then back to K, but not at full alert. Does this sound like my V1 is functioning properly?

  2. #2
    Speed Demon
    Join Date
    Apr 2006
    Location
    Illinois
    Posts
    660

    Default

    I might have to take some video to show what I am trying to ask. The way my V1 reacts to the alerts makes me wonder if it is working correctly. Seems like it use to LOCK onto the strongest signal and hold it. Now it seems to bounce around from stronger to weaker signals.

  3. #3
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,805

    Default

    The signal strengths can fluctuate as conditions change, for example, as you're driving or other cars are going by, causing the relative strengths of the alerts to change.

    An example of this was once when I was at a traffic light near some X and K band falses. The X band was aimed differently from the K, and everytime a car entered the intersection, my V1 would spike on X briefly (as it picked up a reflected signal), then went back to alerting on the K.
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


  4. #4
    Lead Foot
    Join Date
    Jun 2007
    Location
    Nashville Area
    Posts
    493

    Default

    Yes, my brand new V1 does this as well, I also notice it doesn't "hold on" to weak signals very well, but clearly gives an earlier warning than the other detectors in the past that I've owned

  5. #5
    Radar Fanatic
    Join Date
    Feb 2006
    Location
    Bay City, Michigan
    Posts
    2,204

    Default

    here is my theory on this one:

    We all know the v1 will show the "highest priority threat" with Laser, Ka, K, and X in that order. But I believe the algorithm has processed the K band to be kicked to the side or rear. . making it not nearly as High priority because an X band to the front would be higher priority than a K band to the side.

    Just a guess. .

  6. #6
    Speed Demon
    Join Date
    Jul 2005
    Location
    New York
    Posts
    619

    Default

    I have X off but it's happened with K and Ka band before... just the other day, about two miles ahead, there was a cop running stationary K band shooting at me and another cop driving towards me running Ka band. The blinking dot kept switching between K and Ka band and so did the sound tone.

  7. #7
    Speed Demon
    Join Date
    Apr 2006
    Location
    Illinois
    Posts
    660

    Default

    Ok sorry to bring this post back from the dead, but I took some footage of my V1 freaking out and I wanted to get your opinions as to if you think it is malfunctioning or working as it should.

    What you are going to see in this video is me sitting in front of about 7 false X band auto doors and 2 K band auto doors. I am driving slowly past the false alarms and pause for a bit when I get the strong X band alert. Notice how the V1 goes from about half signal (or less) to full alert.

    Thanks,

    CC

    **NOTE**
    This video is pretty loud so check your speaker volume before you watch it!

    Video -
    http://www.youtube.com/watch?v=OgWhfDWJ13s

  8. #8
    Speed Demon
    Join Date
    May 2007
    Location
    SLOVENIA (Europe)
    Posts
    784

    Default

    I don't think there is something wrong with your V1
    My V1 behaves exactly like your V1,when I drive thru RF poluted area

  9. #9
    Speed Demon
    Join Date
    Apr 2006
    Location
    Illinois
    Posts
    660

    Default

    Quote Originally Posted by MetalFlame
    I don't think there is something wrong with your V1
    My V1 behaves exactly like your V1,when I drive thru RF poluted area

    Thanks MetalFlame! I am glad to hear my V1 looks to be working as it should.

    CC

  10. #10
    Lead Foot
    Join Date
    Jun 2007
    Location
    Charlotte, NC
    Posts
    369

    Default

    Mine did the same exact thing when I was going to take some movies back to Blockbuster the other day for my friend (fiend was a funny typo :twisted.

    Anyhow it was like this:
    Code:
    |                    |                                 |
    |                    |                                 |
    |                    |                                 |
    |   Bi-Lo            |   Blockbuster                   |
    |                    |                                 |
    |                    |                                 |
    |                    |                                 |
    `------------------------------------------------------'
    
    
    
                        {[Me]>
    ,--------------------------------------------------------.
    |                    |                                   |
    |   Bank             |        Waffle House               |
    |                    |                                   |
    I was getting 4-5 bogeys and my V1 was acting exactly the same.

 

 

Similar Threads

  1. volume malfunction?
    By buzzboy in forum Escort
    Replies: 5
    Last Post: 05-03-2010, 07:39 PM
  2. Malfunction?
    By nickstath in forum Laser ShifterPro, ZR4, ZR3
    Replies: 0
    Last Post: 10-19-2009, 02:12 PM
  3. Used V1, K-band malfunction
    By th3 factory freak in forum Valentine One
    Replies: 4
    Last Post: 01-24-2009, 12:14 AM
  4. V1 KA Malfunction
    By SKiTLz in forum Valentine One
    Replies: 10
    Last Post: 09-01-2008, 11:34 PM
  5. V1 Hardwire... possible malfunction?
    By a4fever in forum Valentine One
    Replies: 1
    Last Post: 04-12-2006, 07:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •