Page 1 of 14 12311 ... LastLast
Results 1 to 10 of 136
  1. #1
    Almost Banned
    Join Date
    May 2008
    Location
    New England
    Posts
    1,963

    Default received used V1. Not detecting jack

    I received my fleabay purchase of my v1.8 (no pop) Valentine and could hardly contain myself. Imagine my frustration when only 2 of 10 known K falses were picked up. I've used djrams recommended settings which sound safe to me, and have sat 5-10 min in front of the falses in A and liitle L mode without a peep.

    1 down - turns X band off
    2 up - turns K band on
    3 up - Ka band on
    4 up - laser on
    5 up - Ka band normal rampup
    6 up - Ka band false alarm guard on
    7 down - K band automute on
    8 up - enables mute lever
    A up - Main volume controlled by volume knob
    b down c up d up - 30 second K band automute
    E down - K band stays muted at 4 lights
    F down - K band stays muted at 6 lights
    G down - Rear K band at muted volume
    H down - Ku band off



    The weak. Detection of the two it did pick up followed with the arrows correctly it seemed. Im positive its not working and even spoke to Valentine about it Here's my question to y'all.

    I paid $240 because Paypal discounted the purchase. Do you recommend I return it for my money back via Paypal and shop for another (seller claimed it worked perfect). Maybe try to gey $45 back from them? Or just keep it and send it in to valentine with another $45 plus shipping?
    Last edited by RadarKid; 11-24-2008 at 03:49 PM.

  2. #2
    Radar Fanatic
    Join Date
    May 2005
    Posts
    2,501

    Default Re: received used V1. Not detecting jack

    Reset everything to factory defaults and try it again.

    What is the software ver?

    Do you have another detector to try the same test with?

    $240 for a 1.8 is a pretty damn good price.

  3. #3
    Almost Banned
    Join Date
    May 2008
    Location
    New England
    Posts
    1,963

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by th3 factory freak View Post
    Reset everything to factory defaults and try it again.

    What is the software ver?

    Do you have another detector to try the same test with?

    $240 for a 1.8 is a pretty damn good price.
    I have my 9500i that goes nuts in those locations.
    Not a peep from the V1. I don't recall what the software version is. It shouldnt really matter though considering how silent it was 200 feet from the door openers.

    I went through the settings with the tech from V1. We both are thinking its out of calibration or something.

    I agree, $240 is great (I bid like $260 and thats good, but PayPal discounted it for some special they were running). I'm thinking I may try to get the $45 back from the seller since he claimed it worked perfect and it doesnt detect anything at all.

  4. #4
    Speed Demon
    Join Date
    Aug 2007
    Location
    Columbus, OH
    Posts
    679

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by RadarKid View Post
    I received my fleabay purchase of my v1.8 (no pop) Valentine and could hardly contain myself. Imagine my frustration when only 2 of 10 known K falses were picked up. I've used djrams recommended settings which sound safe to me, and have sat 5-10 min in front of the falses in A and liitle L mode without a peep. The weak. Detection of the two it did pick up followed with the arrows correctly it seemed. Im positive its not working and even spoke to Valentine about it Here's my question to y'all.

    I paid $240 because Paypal discounted the purchase. Do you recommend I return it for my money back via Paypal and shop for another (seller claimed it worked perfect). Maybe try to gey $45 back from them? Or just keep it and send it in to valentine with another $45 plus shipping?

    Here's what I did. My wife bought mine for me for $280 from someone who also said it worked (and with RDs that is a gray area, A LOT of people will just say it works if it turns on, course we all know theres a lot more to RDs working or not working). So he said it worked, and he had over 1000 positives, so she thoguht why not. I got it and had the same experience as you, alot of my false areas, actually, all of them save for one Ka false wouldnt register at ALL. All X and K falses that i KNEW to be falses would not register. I figured ok thats the price you pay for using fleabay, sent it in to VR and spent the $45, so now im in it for $325, it came back working flawlessly, and i figured hey, still got $75 off of a new one. I didn't push the guy to reimburse for the $45 just simply to save myself a headache, i still got a badass detector for a significant amount less then new. Its a risk you take from using ebay.

    Bottom line, I say send it in, worst case you pay $285 after the repair, THAT is a steal my friend.

    Course, you could run the risk of it being REALLY a dud and they call you up and say it will cost $100+. Though thats a low chance, its still a chance you have to consider. But I think, personally, I would still send it in, I did, and it worked out in my case. Good luck to you in whatever venue you choose.

  5. #5
    Almost Banned
    Join Date
    May 2008
    Location
    New England
    Posts
    1,963

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by Paperlantern View Post
    Here's what I did. My wife bought mine for me for $280 from someone who also said it worked (and with RDs that is a gray area, A LOT of people will just say it works if it turns on, course we all know theres a lot more to RDs working or not working). So he said it worked, and he had over 1000 positives, so she thoguht why not. I got it and had the same experience as you, alot of my false areas, actually, all of them save for one Ka false wouldnt register at ALL. All X and K falses that i KNEW to be falses would not register. I figured ok thats the price you pay for using fleabay, sent it in to VR and spent the $45, so now im in it for $325, it came back working flawlessly, and i figured hey, still got $75 off of a new one. I didn't push the guy to reimburse for the $45 just simply to save myself a headache, i still got a badass detector for a significant amount less then new. Its a risk you take from using ebay.

    Bottom line, I say send it in, worst case you pay $285 after the repair, THAT is a steal my friend.

    Course, you could run the risk of it being REALLY a dud and they call you up and say it will cost $100+. Though thats a low chance, its still a chance you have to consider. But I think, personally, I would still send it in, I did, and it worked out in my case. Good luck to you in whatever venue you choose.
    Im waiting to hear back from the seller. Im not too happy about being lied to. $240 IS a steal, IF IT WORKS. And it doesnt. I plan on trying to get some back or Im leaving negative feedback.
    Last edited by RadarKid; 11-24-2008 at 03:47 PM.

  6. #6
    Professional
    Join Date
    Nov 2007
    Location
    Michigan
    Posts
    896

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by RadarKid View Post
    Im waiting to hear back from the seller. Im not too happy about being lied to. $240 IS a steal, IF IT WORKS. And it doesnt. I plan on trying to get some back or Im leaving negative feedback.
    Send it back. Get your $$ and buy one factory direct. Again, you get 30 days to see if it fits your style. To hell with eBay.

  7. #7
    Radar Fanatic
    Join Date
    May 2005
    Posts
    2,501

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by RadarKid View Post
    I have my 9500i that goes nuts in those locations.
    Not a peep from the V1. I don't recall what the software version is. It shouldnt really matter though considering how silent it was 200 feet from the door openers.

    I went through the settings with the tech from V1. We both are thinking its out of calibration or something.

    I agree, $240 is great (I bid like $260 and thats good, but PayPal discounted it for some special they were running). I'm thinking I may try to get the $45 back from the seller since he claimed it worked perfect and it doesnt detect anything at all.
    Did you check the serial # on V1's website?

    What is the serial #???

  8. #8
    Almost Banned
    Join Date
    May 2008
    Location
    New England
    Posts
    1,963

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by th3 factory freak View Post
    Did you check the serial # on V1's website?

    What is the serial #???

    Yes I did. It shows up as he advertised.
    3851150642

  9. #9
    Radar Fanatic
    Join Date
    May 2005
    Posts
    2,501

    Default Re: received used V1. Not detecting jack

    Here is what I would do before you leave negative feedback, send it back and raise hell.

    Check the serial #. Compare the cost of updating the unit
    to the cost of sending it in for checkup, you can determine that
    by calling Valentine 1.

    If the cost of an upgrade is the same or less than the cost of the
    repair, it's a no brainer.

    If you don't want to send it in, then contact eBay and go through
    the conflict resolution and try to get your $$$$ back.

  10. #10
    Radar Fanatic
    Join Date
    May 2005
    Posts
    2,501

    Default Re: received used V1. Not detecting jack

    Quote Originally Posted by RadarKid View Post
    Yes I did. It shows up as he advertised.
    3851150642

    Ok, so for another $139 you can get a brand new detector. So if you go on this avenue, you pretty much paid $380 for a new detector, so you saved $19....

    Call V1 and ask how much is to check and possibly repair the unit. Repairing it, will most likely not be worth it, unless it's less than $139.

    In the meantime, contact the seller and see what he has to say about this.

 

 

Similar Threads

  1. Anybody with a Car Jack in IN????
    By whistlerfan in forum Car Talk
    Replies: 13
    Last Post: 05-20-2009, 05:45 AM
  2. ear jack
    By RadarRick in forum Motorcycle Protection
    Replies: 22
    Last Post: 10-09-2006, 11:28 AM
  3. 2nd Power jack
    By DogGod in forum Valentine One
    Replies: 3
    Last Post: 09-04-2006, 10:04 AM
  4. Micro Jack - Speaker Jack on v1
    By bauzer71487 in forum Valentine One
    Replies: 6
    Last Post: 07-26-2006, 09:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •