Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Radar Fanatic
    Join Date
    Apr 2006
    Location
    Big, flat, corn infested, boretown
    Posts
    2,083

    Default replacement speaker for V955

    The speaker on my V955 is going out and I am wondering what replacement speaker I should get. I found a few at radio shack, but I dont really know what I need.

    I found this

    95dB Panel Piezo Buzzer
    Model: 273-075 | Catalog #: 273-075

    This 95dB Panel Piezo buzzer operates on 12VDC. Buzzer rated at 3,200Hz and carries 7mA current
    Would this work?

  2. #2
    Experienced
    Join Date
    Apr 2005
    Posts
    288

    Default Re: replacement speaker for V955

    Quote Originally Posted by DogGod
    The speaker on my V955 is going out and I am wondering what replacement speaker I should get. I found a few at radio shack, but I dont really know what I need.

    I found this

    95dB Panel Piezo Buzzer
    Model: 273-075 | Catalog #: 273-075

    This 95dB Panel Piezo buzzer operates on 12VDC. Buzzer rated at 3,200Hz and carries 7mA current
    Would this work?
    the escorts use piezo speakers because there's no need for voice. if you're going to be opening the unit anyway, just take out the speaker and use that as reference for what to get.

  3. #3
    Radar Fanatic
    Join Date
    Apr 2006
    Location
    Big, flat, corn infested, boretown
    Posts
    2,083

    Default

    The speaker is already gone, and I dont remember what it looked like. Anyone have pics of the inside of this detector.

  4. #4
    Newcomer
    Join Date
    Oct 2007
    Location
    Knoxville, TN
    Posts
    74

    Default

    If it's the same as the 995 I can snap a picture for you...

  5. #5
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default

    I would take a voltmeter and just measure the voltage and current coming across the speaker wires when you boot it up and buy a peizo speaker that's rated for the same volatage and current

  6. #6

    Default Re: replacement speaker for V955

    Quote Originally Posted by DogGod
    The speaker on my V955 is going out and I am wondering what replacement speaker I should get. I found a few at radio shack, but I dont really know what I need.

    I found this

    95dB Panel Piezo Buzzer
    Model: 273-075 | Catalog #: 273-075

    This 95dB Panel Piezo buzzer operates on 12VDC. Buzzer rated at 3,200Hz and carries 7mA current
    Would this work?
    No. The original speaker is a 1.1 inch diameter 4mm thick 32ohm speaker made by PUI. Bel now has PUI's newer and louder high temperature version of this speaker. The new PUI speaker model is not supposed to blow due to high heat. Call Bell and they should send one to you for free or for a small charge (around $5 or $6).

  7. #7
    Radar Fanatic
    Join Date
    Apr 2006
    Location
    Big, flat, corn infested, boretown
    Posts
    2,083

    Default Re: replacement speaker for V955

    Quote Originally Posted by MEM-TEK
    Quote Originally Posted by DogGod
    The speaker on my V955 is going out and I am wondering what replacement speaker I should get. I found a few at radio shack, but I dont really know what I need.

    I found this

    95dB Panel Piezo Buzzer
    Model: 273-075 | Catalog #: 273-075

    This 95dB Panel Piezo buzzer operates on 12VDC. Buzzer rated at 3,200Hz and carries 7mA current
    Would this work?
    No. The original speaker is a 1.1 inch diameter 4mm thick 32ohm speaker made by PUI. Bel now has PUI's newer and louder high temperature version of this speaker. The new PUI speaker model is not supposed to blow due to high heat. Call Bell and they should send one to you for free or for a small charge (around $5 or $6).
    Thank you sir.

  8. #8
    Speed Demon
    Join Date
    Jul 2007
    Location
    Shreveport, LA
    Posts
    783

    Default

    Okay Mike, you can't pass on that nugget without giving us an idea of when that new speaker was put into the units! I want to know if I have it or not!

  9. #9
    Radar Fanatic
    Join Date
    Apr 2006
    Location
    Big, flat, corn infested, boretown
    Posts
    2,083

    Default

    Ok sorry on more question. As someone posted above, a buzzer would not work because this bell uses a voice feature. If I disabled the voice would a piezo buzzer work?

  10. #10

    Default

    Quote Originally Posted by bkrell
    Okay Mike, you can't pass on that nugget without giving us an idea of when that new speaker was put into the units! I want to know if I have it or not!
    Hi bkrell,

    I am guessing that Belscort has had these new speakers for maybe two months since a couple of members reported a while back that the card with their repaired radar detectors said that the speaker was replaced with a high temp speaker. PUI still doesn't have the new speaker model listed on their web site.

    My 9500i, manufactured in early August, has one of the new high temp speakers.

    --Michael

 

 

Similar Threads

  1. Replacement speaker for my pro78
    By pgramr in forum Whistler
    Replies: 6
    Last Post: 07-31-2012, 07:13 PM
  2. Second STi-R speaker replacement
    By denaliman in forum Beltronics
    Replies: 5
    Last Post: 03-22-2009, 11:32 AM
  3. X50 on off switch and speaker replacement?
    By milkman-n8-2 in forum Radar Detectors - General
    Replies: 5
    Last Post: 05-16-2007, 12:44 AM
  4. Replies: 3
    Last Post: 05-08-2006, 11:50 PM
  5. Replies: 4
    Last Post: 08-02-2005, 10:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •