Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 57

Thread: STi-R fail

  1. #31
    Good Citizen
    Join Date
    Aug 2009
    Location
    Wisconsin
    Posts
    136

    Default Re: STi-R fail

    Quote Originally Posted by BrownOut View Post
    Lucky you have a volt meter on the display which should show variations of power supply to the unit. It might be worth it to see if it has spiking or drain when other demands are put on the single hot wire. Set the unit highway and then go to that display and see. This feature should show variations on power. Maybe You are having a (BrownOut). Another wonderful feature that allows you to check if the power supply is being maintained.
    I pulled my power for both STi R and LI's off the cruse control in the fuse box as suggested by Catagory4. The cruse is a 2 amp circut and is switched power. Each CPU is grounded separately.

    In reference to a brown out, The other day I mistakenly left the lights on and ran the battery down to nothing. The car was jump started to get going I noticed that the RD & LJ's did not power up automatically as they would have if the car was shut off normally. I powered them manually and went on my way.

  2. #32
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi-R fail

    Quote Originally Posted by BrownOut View Post
    Lucky you have a volt meter on the display which should show variations of power supply to the unit. It might be worth it to see if it has spiking or drain when other demands are put on the single hot wire. Set the unit highway and then go to that display and see. This feature should show variations on power. Maybe You are having a (BrownOut). Another wonderful feature that allows you to check if the power supply is being maintained.
    I keep the volt meter on at all times as the bonnevilles instrument panel is a crap shoot on weather or not it's working or not. I rely on the STi-R's voltmeter and the XTR-695 as backup

  3. #33
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi-R fail

    Quote Originally Posted by Curti View Post
    Quote Originally Posted by BrownOut View Post
    Lucky you have a volt meter on the display which should show variations of power supply to the unit. It might be worth it to see if it has spiking or drain when other demands are put on the single hot wire. Set the unit highway and then go to that display and see. This feature should show variations on power. Maybe You are having a (BrownOut). Another wonderful feature that allows you to check if the power supply is being maintained.
    I pulled my power for both STi R and LI's off the cruse control in the fuse box as suggested by Catagory4. The cruse is a 2 amp circut and is switched power. Each CPU is grounded separately.

    In reference to a brown out, The other day I mistakenly left the lights on and ran the battery down to nothing. The car was jump started to get going I noticed that the RD & LJ's did not power up automatically as they would have if the car was shut off normally. I powered them manually and went on my way.
    Interesting, I have cruise control on the car, I wonder if it's got a fuse and if it's switched, I should look into this.

  4. #34
    Good Citizen
    Join Date
    Feb 2009
    Location
    Western NY
    Posts
    190

    Default Re: STi-R fail

    Take directly to the fuse block. Use an ad-a-fuse from the auto store or you can use a fork stake on and it will push directly into a slot on the block. Use a volt meter to find 12V that is always on or if you prefer a keyed source. Just make sure the stake on is tight when it pushes in. It will stay in place and you do not double up on a fuse with something else.

  5. #35
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi-R fail

    Quote Originally Posted by Matt View Post
    Take directly to the fuse block. Use an ad-a-fuse from the auto store or you can use a fork stake on and it will push directly into a slot on the block. Use a volt meter to find 12V that is always on or if you prefer a keyed source. Just make sure the stake on is tight when it pushes in. It will stay in place and you do not double up on a fuse with something else.
    I'm already using add-a-fuse, problem is I can't find ANY switched fuse that's ONLY on when the vehicle's key is on. So instead I have it wired to a kill switch for the moment.

  6. #36
    Good Citizen
    Join Date
    Aug 2009
    Location
    Wisconsin
    Posts
    136

    Default Re: STi-R fail

    Quote Originally Posted by Lucky225 View Post
    Quote Originally Posted by Matt View Post
    Take directly to the fuse block. Use an ad-a-fuse from the auto store or you can use a fork stake on and it will push directly into a slot on the block. Use a volt meter to find 12V that is always on or if you prefer a keyed source. Just make sure the stake on is tight when it pushes in. It will stay in place and you do not double up on a fuse with something else.
    I'm already using add-a-fuse, problem is I can't find ANY switched fuse that's ONLY on when the vehicle's key is on. So instead I have it wired to a kill switch for the moment.
    If you have a late model car, there are probably two fuse boxes. One under the hood which is mostly all the high amp stuff and one in the passenger compartment
    which is primarly accessories etc. Somewhere there has to be switched power.

  7. #37
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi-R fail

    Quote Originally Posted by Curti View Post
    Quote Originally Posted by Lucky225 View Post
    Quote Originally Posted by Matt View Post
    Take directly to the fuse block. Use an ad-a-fuse from the auto store or you can use a fork stake on and it will push directly into a slot on the block. Use a volt meter to find 12V that is always on or if you prefer a keyed source. Just make sure the stake on is tight when it pushes in. It will stay in place and you do not double up on a fuse with something else.
    I'm already using add-a-fuse, problem is I can't find ANY switched fuse that's ONLY on when the vehicle's key is on. So instead I have it wired to a kill switch for the moment.
    If you have a late model car, there are probably two fuse boxes. One under the hood which is mostly all the high amp stuff and one in the passenger compartment
    which is primarly accessories etc. Somewhere there has to be switched power.
    It's an 04 pontiac, I've checked both the hood fusebox, and the one under the rear passenger seat. The only thing I can find is the radio, and it's not true switched, it just uses ripple effect to signal it's hot, yet the positive is always +12v

  8. #38
    Good Citizen
    Join Date
    Feb 2009
    Location
    Western NY
    Posts
    190

    Default Re: STi-R fail

    Is their more than one cigarette lighter in the car. If so one is probably switched. You might not have a switched fuse spot empty. They do make an adaptor that you can put into one fuse spot and in turn it holds two fuses. There is a pigtail off one of the fuses t add an accesory. Did you try a Pontiac forum??

  9. #39
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: STi-R fail

    Quote Originally Posted by Matt View Post
    Is their more than one cigarette lighter in the car. If so one is probably switched. You might not have a switched fuse spot empty. They do make an adaptor that you can put into one fuse spot and in turn it holds two fuses. There is a pigtail off one of the fuses t add an accesory. Did you try a Pontiac forum??
    Yep, tried Pontiac forums, pretty much everyone with the bonneville says you're screwed. There's a cigarette lighter in the REAR of the car that's pseudo-switched (stays on for 10 minutes after the car is turned off, I don't find this acceptable) or you have to tap into the dome lights. I have the add-a-circuit/add-a-fuse adapter, if there was a switched fuse in the car, I sure as hell don't know where it is, sure wish I did tho.

  10. #40
    Good Citizen
    Join Date
    Feb 2009
    Location
    Western NY
    Posts
    190

    Default Re: STi-R fail

    I went back and read some of your replies.
    1-You will never get more voltage than what your battery stores. 12-14v roughly
    2-Increase Amperage to blow the fuse would indicate a short or malfunction in the STI-R
    3-The above should blow the fuse prior. As long as the fuse is sized correctly. Not to big.
    The unit should not get fried just because it is on while starting your car.
    4-Have you checked to make sure that part of the wire to the remote unit is not stripped someplace. Metal rubbing on the wire overtime could be the culprit. Even an intermitten problem.

 

 

Similar Threads

  1. V1 Fail >(
    By lilc4247 in forum Valentine One
    Replies: 55
    Last Post: 05-11-2011, 07:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •