Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 71
  1. #21
    Lead Foot
    Join Date
    Jan 2006
    Location
    Albany, GA
    Posts
    370

    Default

    I shift when ever I feel like it. With a 4 banger and a v6 I'm not burning that much gas. If I want to go faster, I go faster. If not, I shift usually by 3k.

  2. #22
    Yoda of Radar
    Join Date
    Jun 2005
    Location
    O'FALLON, MISSOURI
    Posts
    15,630

    Default

    I have read that 3K is where your supposed to shift. Sometimes if there are vehicles next to me and I don't want to lag behind them I'll get up to 4K or 5K and then shift to 2nd. I then shift from second into 3rd about 3K - 4K sometimes redline it depending if I really want to get up to speed.

    Do you get better gas millage in Lower gears or higher gears? I could never figure that out.

    Also does anyone downshift? I have read it's ok and then I have read it's not ok. I like to downshift myself.
    Laser Interceptor Dual, Laser Interceptor Quad, Valentine 1 & The Escort 8500 X50 - Blue, Uniden BC296D, GRE500, Lasershield, 2011 Kia Soul +, Yamaha FZ6, 2005 Black Dodge Neon SRT-4,


  3. #23
    Radar Fanatic
    Join Date
    Feb 2005
    Location
    Earth
    Posts
    2,357

    Default

    Quote Originally Posted by StlouisX50
    Do you get better gas millage in Lower gears or higher gears? I could never figure that out.
    Generally speaking you will get better gas mileage in a higher gear. If I'm cruising around town at 40mph in fifth gear I will get much better gas mileage than doing the same thing in third gear. That's just a matter of the engine spinning slower to match the low power demand. The exception is the case where I need to accelerate. If I just leave it in fifth and put my foot down the engine won't develop power efficiently. I'll be burning more gas for not a whole lot of benefit and it will take forever to get up to speed. It would be better to downshift to a more appropriate gear, get up to speed relatively quickly, and then get back in my high gear to cruise again.

    Quote Originally Posted by StlouisX50
    Also does anyone downshift? I have read it's ok and then I have read it's not ok. I like to downshift myself.
    There's nothing wrong with downshifting if you do it right. Just blip the throttle before you let off the clutch to match the engine RPMs to the new input shaft speed. That saves your clutch and keeps the car from lurching.

    The question I have is whether or not it makes sense to double clutch on a downshift. It use to make things much smoother on my old 85 Volvo but I haven't done it on my newer cars since I was once told that you shouldn't DC a synchromesh tranny. Can anyone answer that one?

  4. #24
    Power User
    Join Date
    Aug 2005
    Location
    South Florida
    Posts
    4,150

    Default

    You can downsift all day long, naturally if you do heavey 4th gear down to 2nd gear your going to wear parts faster then if your do 4th to 3rd then to 2nd... will you kill your tanny fast, no, but just keep that in mind that thngs have cause and effect.

    I drove my 4 cyl Isuzu Impulse back in the day very spirited, shift gears between 3k to 4k rpm, and coming into a turn down shift from 4th to 2nd regularly. End result, replaced clutch at 90k miles, note that this is in the city stop and go traffic in addition to my rough driving. The sychros were fine but I had a free oppurtunity to do a swap at 130k miles so I did. Shortly after car had suffered serious electrical problems due to a break in car radio theft just shortly before. Got rid of the car at 140k miles.

    As far as bliping the throttle or double clutching, that is not needed. You not saveing anything from the stresses of downshifting especially when skipping gears.

    However I suppose I should state that your milage may vary, every car is made some what differently. As far as engine work goes the tranny was basicly the only thing I needed to work on engine wise. There was a leaky head gasket on one cyl but the pressures were pretty dam good and even at that milage, I tryied to repair but a dam allen head bolt refused to break loose, after the sixth socket replacement from sears I gave up and kept on going. Did bust the rear differential gear box ops: , regular rack and pinon work. I loved that car, not to mention packing 11 people in that hatch back, good times.

  5. #25
    Professional
    Join Date
    Jan 2005
    Location
    Washington, D.C.
    Posts
    970

    Default

    Quote Originally Posted by amoney

    As far as bliping the throttle or double clutching, that is not needed. You not saveing anything from the stresses of downshifting especially when skipping gears.
    lol the misinformation runs rampant on this forum.

    wrong. wrong. wrong.

    matching revs to the gear you are in is fundamental. hell, if it wasnt needed, why do it in formula 1? :roll:

    it saves your clutch and is definately smoother.

  6. #26
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Quote Originally Posted by Brent_Vino
    Quote Originally Posted by amoney

    As far as bliping the throttle or double clutching, that is not needed. You not saveing anything from the stresses of downshifting especially when skipping gears.
    lol the misinformation runs rampant on this forum.

    wrong. wrong. wrong.

    matching revs to the gear you are in is fundamental. hell, if it wasnt needed, why do it in formula 1? :roll:

    it saves your clutch and is definately smoother.
    Brent-Vino you are the epitome of misinformation on this website so dont start talking there.



    Its also obvious that you have never heard of synchros and dog teeth have you Brent-Vino, making double clutching a thing of the past... pretty much uneeded, granted it can relieve stress upon the synchros and such, and can be smoother, but unless you drive a car from the ice ace, or a big rig... no need to double clutch really now... it does have some very very slight benefits... its does reduce the shock factor, but has no real place as it used to, its a good thing to know how to do correctly... but in modern times unneeded.



    Double clutching the Formula one cars ummm ok? First off no one does it, a computer does it.... and the reason why its needed in F1 is lets see:

    To compare the carbon plate semi-automatic paddle shifting NSM Formula One cars(clutch/tranny) that run 22,000RPM max, 18,000-20,000 average with 700-950 HP (depending on year) to your average family car (a BMW M3 for example) is one of the funniest apples to oranges miscomparison I have EVER heard... Hmm why would they need to do that (match revs. by double clutching) upon downshifting trying to take hairpins bringing the engine down from 20,000RPM. Seriously.


    Obviously your forgetting a little something when you speak... F1 cars only have to last for 500miles (and the same with their rocker arms). Your average family car Brent (lets say a BMW M3) has to last for much longer. So keep going ahead and dont use synchros...which were made so double clutching isnt needed, and tell all how much good one really thinks they are doing to their rocker arms... by revving an engine that has no load on it... especially for hard (d)shifting.


  7. #27
    Professional
    Join Date
    Jan 2005
    Location
    Washington, D.C.
    Posts
    970

    Default

    lol.

    since when is double-clutching, matching revs??



    boy you are so misinformed again.


    double-clutching = in 5th gear, clutch in, move stick to neutral, clutch out, blip the throttle, clutch in, move to 3rd gear, clutch out, throttle. this will save the wear n tear on synchros as well as the clutch.

    matching revs = in 5th gear, clutch in, blip throttle, move to 3rd gear, clutch out, throttle. this will save the wear on your clutch.

    heel-toe = same thing, except applying brake.

    damn these kids! :roll:

  8. #28
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Brent by saying what you did, you would have called yourself wrong because you (1st) said:

    Quote Originally Posted by Brent_Vino
    matching revs to the gear you are in is fundamental. hell, if it wasnt needed, why do it in formula 1?

    Then you said:
    Quote Originally Posted by Brent_Vino
    Since when is double-clutching, matching revs??

    double-clutching = in 5th gear, clutch in, move stick to neutral, clutch out, blip the throttle, clutch in, move to 3rd gear, clutch out, throttle. this will save the wear n tear on synchros as well as the clutch.

    matching revs = in 5th gear, clutch in, blip throttle, move to 3rd gear, clutch out, throttle. this will save the wear on your clutch.

    THEY DONT MATCH REVS. IN FORMULA ONE, a computer double clutches the system for them... there is no matching revs, so ask yourself why did you say F1 matches revs... when they double-clutch (if you say they are so different) OWNED.


    I did it (said what I said) just to rip you apart your lack of F1 knowledge)... because you said F1 cars match revs... which they dont (the semi-auto computer) double-clutches... there is no NO "MATCHING REVS" (as you describe in your above post).
    You obviously are misinformed about the F1 series... so I was picking on you with that remark (because there is no F1 "matching revs" its a computer double clutching)... you ripped apart yourself -LOL- by trying to explain to me how completely different they are... owned!


    :roll: :roll:

    And heel-toe is not the same thing, because your right foot is over 2 pedals at the exact same time (which shouldnt happen otherwise), it is done mostly (for RRacing), that does not use synchros.


    Brent, its ok son, you just have a habit of getting pwn3d... but owning yourself... thats just sad.

  9. #29
    Yoda of Radar
    Join Date
    Dec 2004
    Location
    In front of my computer
    Posts
    10,773

    Default

    OK let me tell you guys something...

    F1 cars don't have synchronised gearboxes!

    And with the shifting done by computer, you can doubleclutch and match the revs right into the gear... bam bam bam.

    With a synchro gearbox, the syncronisers need time to speed up / slow down the gearset and slide into gear. In racing, we don't have time Also the synchros add weight...

    Anyway I always doubleclutch...

  10. #30
    Yoda of Radar
    Join Date
    Nov 2005
    Location
    NY
    Posts
    11,015

    Default

    Quote Originally Posted by SmaartAasSaabr
    OK let me tell you guys something...

    F1 cars don't have synchronised gearboxes!

    And with the shifting done by computer, you can doubleclutch and match the revs right into the gear... bam bam bam.
    Exactly what I said. 8) 8)

    Thats how come his (Vino's) remarks are so far off base.

 

 

Similar Threads

  1. my old technique
    By RJ's325ITS in forum Other Countermeasures
    Replies: 7
    Last Post: 11-13-2007, 10:31 PM
  2. Shifting
    By Radar 4 Ever in forum Car Talk
    Replies: 7
    Last Post: 08-08-2006, 09:57 PM
  3. interesting technique i tried when applying
    By Mackid343 in forum Laser Veil Stealth Coating
    Replies: 11
    Last Post: 04-03-2006, 03:35 PM
  4. New veil application technique?
    By drfish in forum Laser Veil Stealth Coating
    Replies: 11
    Last Post: 02-17-2006, 11:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •